diff mbox series

[v8,27/27] x86/cet/shstk: Add Shadow Stack instructions to opcode map

Message ID 20190813205225.12032-28-yu-cheng.yu@intel.com (mailing list archive)
State New, archived
Headers show
Series Control-flow Enforcement: Shadow Stack | expand

Commit Message

Yu-cheng Yu Aug. 13, 2019, 8:52 p.m. UTC 
Add the following shadow stack management instructions.

INCSSP:
    Increment shadow stack pointer by the steps specified.

RDSSP:
    Read SSP register into a GPR.

SAVEPREVSSP:
    Use "prev ssp" token at top of current shadow stack to
    create a "restore token" on previous shadow stack.

RSTORSSP:
    Restore from a "restore token" pointed by a GPR to SSP.

WRSS:
    Write to kernel-mode shadow stack (kernel-mode instruction).

WRUSS:
    Write to user-mode shadow stack (kernel-mode instruction).

SETSSBSY:
    Verify the "supervisor token" pointed by IA32_PL0_SSP MSR,
    if valid, set the token to busy, and set SSP to the value
    of IA32_PL0_SSP MSR.

CLRSSBSY:
    Verify the "supervisor token" pointed by a GPR, if valid,
    clear the busy bit from the token.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
---
 arch/x86/lib/x86-opcode-map.txt               | 26 +++++++++++++------
 tools/objtool/arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
 2 files changed, 36 insertions(+), 16 deletions(-)

Comments

Adrian Hunter Nov. 8, 2019, 1:27 p.m. UTC | #1 
On 13/08/19 11:52 PM, Yu-cheng Yu wrote:
> Add the following shadow stack management instructions.
> 
> INCSSP:
>     Increment shadow stack pointer by the steps specified.
> 
> RDSSP:
>     Read SSP register into a GPR.
> 
> SAVEPREVSSP:
>     Use "prev ssp" token at top of current shadow stack to
>     create a "restore token" on previous shadow stack.
> 
> RSTORSSP:
>     Restore from a "restore token" pointed by a GPR to SSP.
> 
> WRSS:
>     Write to kernel-mode shadow stack (kernel-mode instruction).
> 
> WRUSS:
>     Write to user-mode shadow stack (kernel-mode instruction).
> 
> SETSSBSY:
>     Verify the "supervisor token" pointed by IA32_PL0_SSP MSR,
>     if valid, set the token to busy, and set SSP to the value
>     of IA32_PL0_SSP MSR.
> 
> CLRSSBSY:
>     Verify the "supervisor token" pointed by a GPR, if valid,
>     clear the busy bit from the token.
> 
> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
> ---
>  arch/x86/lib/x86-opcode-map.txt               | 26 +++++++++++++------
>  tools/objtool/arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
>  2 files changed, 36 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
> index e0b85930dd77..c5e825d44766 100644
> --- a/arch/x86/lib/x86-opcode-map.txt
> +++ b/arch/x86/lib/x86-opcode-map.txt
> @@ -366,7 +366,7 @@ AVXcode: 1
>  1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
>  1c:
>  1d:
> -1e:
> +1e: RDSSP Rd (F3),REX.W
>  1f: NOP Ev
>  # 0x0f 0x20-0x2f
>  20: MOV Rd,Cd
> @@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
>  ff: UD0
>  EndTable
>  
> -Table: 3-byte opcode 1 (0x0f 0x38)
> +Table: 3-byte opcode 1 (0x0f 0x01)
> +Referrer:
> +AVXcode:
> +# Skip 0x00-0xe7
> +e8: SETSSBSY (f3)
> +e9:
> +ea: SAVEPREVSSP (f3)
> +# Skip 0xeb-0xff
> +EndTable
> +
> +Table: 3-byte opcode 2 (0x0f 0x38)
>  Referrer: 3-byte escape 1
>  AVXcode: 2
>  # 0x0f 0x38 0x00-0x0f
> @@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
>  f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
>  f2: ANDN Gy,By,Ey (v)
>  f3: Grp17 (1A)
> -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
> +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
>  f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
>  EndTable
>  
> -Table: 3-byte opcode 2 (0x0f 0x3a)
> +Table: 3-byte opcode 3 (0x0f 0x3a)
>  Referrer: 3-byte escape 2
>  AVXcode: 3
>  # 0x0f 0x3a 0x00-0xff
> @@ -948,7 +958,7 @@ GrpTable: Grp7
>  2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
>  3: LIDT Ms
>  4: SMSW Mw/Rv
> -5: rdpkru (110),(11B) | wrpkru (111),(11B)
> +5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
>  6: LMSW Ew
>  7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
>  EndTable
> @@ -1019,8 +1029,8 @@ GrpTable: Grp15
>  2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
>  3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
>  4: XSAVE | ptwrite Ey (F3),(11B)
> -5: XRSTOR | lfence (11B)
> -6: XSAVEOPT | clwb (66) | mfence (11B)
> +5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
> +6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
>  7: clflush | clflushopt (66) | sfence (11B)
>  EndTable
>  
> diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
> index e0b85930dd77..c5e825d44766 100644
> --- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
> +++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
> @@ -366,7 +366,7 @@ AVXcode: 1
>  1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
>  1c:
>  1d:
> -1e:
> +1e: RDSSP Rd (F3),REX.W

RDSSP is in a Grp with ENDBR32 and ENDBR64

>  1f: NOP Ev
>  # 0x0f 0x20-0x2f
>  20: MOV Rd,Cd
> @@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
>  ff: UD0
>  EndTable
>  
> -Table: 3-byte opcode 1 (0x0f 0x38)
> +Table: 3-byte opcode 1 (0x0f 0x01)
> +Referrer:
> +AVXcode:
> +# Skip 0x00-0xe7
> +e8: SETSSBSY (f3)
> +e9:
> +ea: SAVEPREVSSP (f3)

SETSSBSY and SAVEPREVSSP should be in Grp7

> +# Skip 0xeb-0xff
> +EndTable
> +
> +Table: 3-byte opcode 2 (0x0f 0x38)
>  Referrer: 3-byte escape 1
>  AVXcode: 2
>  # 0x0f 0x38 0x00-0x0f
> @@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
>  f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
>  f2: ANDN Gy,By,Ey (v)
>  f3: Grp17 (1A)
> -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
> +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W

I know already commented on this, but WRSS does not have (66) prefix

Also no other instructions have been annotated with REX.W so maybe omit that

>  f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
>  EndTable
>  
> -Table: 3-byte opcode 2 (0x0f 0x3a)
> +Table: 3-byte opcode 3 (0x0f 0x3a)
>  Referrer: 3-byte escape 2
>  AVXcode: 3
>  # 0x0f 0x3a 0x00-0xff
> @@ -948,7 +958,7 @@ GrpTable: Grp7
>  2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
>  3: LIDT Ms
>  4: SMSW Mw/Rv
> -5: rdpkru (110),(11B) | wrpkru (111),(11B)
> +5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
>  6: LMSW Ew
>  7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
>  EndTable
> @@ -1019,8 +1029,8 @@ GrpTable: Grp15
>  2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
>  3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
>  4: XSAVE | ptwrite Ey (F3),(11B)
> -5: XRSTOR | lfence (11B)
> -6: XSAVEOPT | clwb (66) | mfence (11B)
> +5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
> +6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
>  7: clflush | clflushopt (66) | sfence (11B)
>  EndTable
>  
>
Yu-cheng Yu Nov. 8, 2019, 6:09 p.m. UTC | #2 
On Fri, 2019-11-08 at 15:27 +0200, Adrian Hunter wrote:
> On 13/08/19 11:52 PM, Yu-cheng Yu wrote:
> > Add the following shadow stack management instructions.
> > 
> > INCSSP:
> >     Increment shadow stack pointer by the steps specified.
> > 
> > RDSSP:
> >     Read SSP register into a GPR.
> > 
> > SAVEPREVSSP:
> >     Use "prev ssp" token at top of current shadow stack to
> >     create a "restore token" on previous shadow stack.
> > 
> > RSTORSSP:
> >     Restore from a "restore token" pointed by a GPR to SSP.
> > 
> > WRSS:
> >     Write to kernel-mode shadow stack (kernel-mode instruction).
> > 
> > WRUSS:
> >     Write to user-mode shadow stack (kernel-mode instruction).
> > 
> > SETSSBSY:
> >     Verify the "supervisor token" pointed by IA32_PL0_SSP MSR,
> >     if valid, set the token to busy, and set SSP to the value
> >     of IA32_PL0_SSP MSR.
> > 
> > CLRSSBSY:
> >     Verify the "supervisor token" pointed by a GPR, if valid,
> >     clear the busy bit from the token.
> > 
> > Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
> > ---
> >  arch/x86/lib/x86-opcode-map.txt               | 26 +++++++++++++------
> >  tools/objtool/arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
> >  2 files changed, 36 insertions(+), 16 deletions(-)
> > 
> > diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
> > index e0b85930dd77..c5e825d44766 100644
> > --- a/arch/x86/lib/x86-opcode-map.txt
> > +++ b/arch/x86/lib/x86-opcode-map.txt
> > @@ -366,7 +366,7 @@ AVXcode: 1
> >  1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
> >  1c:
> >  1d:
> > -1e: f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By
> > (F3),(v) | SHRX Gy,Ey,By (F2),(v)> >  EndTable> >  > > -Table: 3-byte opcode
> > 2 (0x0f 0x3a)> > +Table: 3-byte opcode 3 (0x0f 0x3a)> >  Referrer: 3-byte
> > escape 2> >  AVXcode: 3> >  # 0x0f 0x3a 0x00-0xff> > @@ -948,7 +958,7 @@
> > GrpTable: Grp7> >  2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) |
> > VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)> >  3: LIDT Ms> > 
> > 4: SMSW Mw/Rv> > -5: rdpkru (110),(11B) | wrpkru (111),(11B)> > +5: rdpkru
> > (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)> >  6: LMSW Ew> >  7:
> > INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)> >  EndTable> > @@
> > -1019,8 +1029,8 @@ GrpTable: Grp15> >  2: vldmxcsr Md (v1) | WRFSBASE Ry
> > (F3),(11B)> >  3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)> >  4: XSAVE |
> > ptwrite Ey (F3),(11B)> > -5: XRSTOR | lfence (11B)> > -6: XSAVEOPT | clwb
> > (66) | mfence (11B)> > +5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W> >
> > +6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)> >  7: clflush |
> > clflushopt (66) | sfence (11B)> >  EndTable> >  > > 
> > > 
> > > 
> > +1e: RDSSP Rd (F3),REX.W
> >  1f: NOP Ev
> >  # 0x0f 0x20-0x2f
> >  20: MOV Rd,Cd
> > @@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
> >  ff: UD0
> >  EndTable
> >  
> > -Table: 3-byte opcode 1 (0x0f 0x38)
> > +Table: 3-byte opcode 1 (0x0f 0x01)
> > +Referrer:
> > +AVXcode:
> > +# Skip 0x00-0xe7
> > +e8: SETSSBSY (f3)
> > +e9:
> > +ea: SAVEPREVSSP (f3)
> > +# Skip 0xeb-0xff
> > +EndTable
> > +
> > +Table: 3-byte opcode 2 (0x0f 0x38)
> >  Referrer: 3-byte escape 1
> >  AVXcode: 2
> >  # 0x0f 0x38 0x00-0x0f
> > @@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
> >  f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
> >  f2: ANDN Gy,By,Ey (v)
> >  f3: Grp17 (1A)
> > -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> > -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> > +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
> > +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
> >  f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
> >  EndTable
> >  
> > -Table: 3-byte opcode 2 (0x0f 0x3a)
> > +Table: 3-byte opcode 3 (0x0f 0x3a)
> >  Referrer: 3-byte escape 2
> >  AVXcode: 3
> >  # 0x0f 0x3a 0x00-0xff
> > @@ -948,7 +958,7 @@ GrpTable: Grp7
> >  2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
> >  3: LIDT Ms
> >  4: SMSW Mw/Rv
> > -5: rdpkru (110),(11B) | wrpkru (111),(11B)
> > +5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
> >  6: LMSW Ew
> >  7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
> >  EndTable
> > @@ -1019,8 +1029,8 @@ GrpTable: Grp15
> >  2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
> >  3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
> >  4: XSAVE | ptwrite Ey (F3),(11B)
> > -5: XRSTOR | lfence (11B)
> > -6: XSAVEOPT | clwb (66) | mfence (11B)
> > +5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
> > +6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
> >  7: clflush | clflushopt (66) | sfence (11B)
> >  EndTable
> >  
> > diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
> > index e0b85930dd77..c5e825d44766 100644
> > --- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
> > +++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
> > @@ -366,7 +366,7 @@ AVXcode: 1
> >  1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
> >  1c:
> >  1d:
> > -1e:
> > +1e: RDSSP Rd (F3),REX.W
> 
> RDSSP is in a Grp with ENDBR32 and ENDBR64
> 
> >  1f: NOP Ev
> >  # 0x0f 0x20-0x2f
> >  20: MOV Rd,Cd
> > @@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
> >  ff: UD0
> >  EndTable
> >  
> > -Table: 3-byte opcode 1 (0x0f 0x38)
> > +Table: 3-byte opcode 1 (0x0f 0x01)
> > +Referrer:
> > +AVXcode:
> > +# Skip 0x00-0xe7
> > +e8: SETSSBSY (f3)
> > +e9:
> > +ea: SAVEPREVSSP (f3)
> 
> SETSSBSY and SAVEPREVSSP should be in Grp7
> 
> > +# Skip 0xeb-0xff
> > +EndTable
> > +
> > +Table: 3-byte opcode 2 (0x0f 0x38)
> >  Referrer: 3-byte escape 1
> >  AVXcode: 2
> >  # 0x0f 0x38 0x00-0x0f
> > @@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
> >  f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
> >  f2: ANDN Gy,By,Ey (v)
> >  f3: Grp17 (1A)
> > -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> > -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> > +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
> > +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
> 
> I know already commented on this, but WRSS does not have (66) prefix
> 
> Also no other instructions have been annotated with REX.W so maybe omit that

Thanks!  I will look into that.

Yu-cheng
diff mbox series

Patch

diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..c5e825d44766 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -366,7 +366,7 @@  AVXcode: 1
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
 1c:
 1d:
-1e:
+1e: RDSSP Rd (F3),REX.W
 1f: NOP Ev
 # 0x0f 0x20-0x2f
 20: MOV Rd,Cd
@@ -610,7 +610,17 @@  fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
 ff: UD0
 EndTable
 
-Table: 3-byte opcode 1 (0x0f 0x38)
+Table: 3-byte opcode 1 (0x0f 0x01)
+Referrer:
+AVXcode:
+# Skip 0x00-0xe7
+e8: SETSSBSY (f3)
+e9:
+ea: SAVEPREVSSP (f3)
+# Skip 0xeb-0xff
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x38)
 Referrer: 3-byte escape 1
 AVXcode: 2
 # 0x0f 0x38 0x00-0x0f
@@ -789,12 +799,12 @@  f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
 f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
 f2: ANDN Gy,By,Ey (v)
 f3: Grp17 (1A)
-f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
 EndTable
 
-Table: 3-byte opcode 2 (0x0f 0x3a)
+Table: 3-byte opcode 3 (0x0f 0x3a)
 Referrer: 3-byte escape 2
 AVXcode: 3
 # 0x0f 0x3a 0x00-0xff
@@ -948,7 +958,7 @@  GrpTable: Grp7
 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
 6: LMSW Ew
 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
 EndTable
@@ -1019,8 +1029,8 @@  GrpTable: Grp15
 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
-5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
+6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..c5e825d44766 100644
--- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
@@ -366,7 +366,7 @@  AVXcode: 1
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
 1c:
 1d:
-1e:
+1e: RDSSP Rd (F3),REX.W
 1f: NOP Ev
 # 0x0f 0x20-0x2f
 20: MOV Rd,Cd
@@ -610,7 +610,17 @@  fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
 ff: UD0
 EndTable
 
-Table: 3-byte opcode 1 (0x0f 0x38)
+Table: 3-byte opcode 1 (0x0f 0x01)
+Referrer:
+AVXcode:
+# Skip 0x00-0xe7
+e8: SETSSBSY (f3)
+e9:
+ea: SAVEPREVSSP (f3)
+# Skip 0xeb-0xff
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x38)
 Referrer: 3-byte escape 1
 AVXcode: 2
 # 0x0f 0x38 0x00-0x0f
@@ -789,12 +799,12 @@  f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
 f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
 f2: ANDN Gy,By,Ey (v)
 f3: Grp17 (1A)
-f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
 EndTable
 
-Table: 3-byte opcode 2 (0x0f 0x3a)
+Table: 3-byte opcode 3 (0x0f 0x3a)
 Referrer: 3-byte escape 2
 AVXcode: 3
 # 0x0f 0x3a 0x00-0xff
@@ -948,7 +958,7 @@  GrpTable: Grp7
 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
 6: LMSW Ew
 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
 EndTable
@@ -1019,8 +1029,8 @@  GrpTable: Grp15
 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
-5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
+6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable