[01/11] dt-bindings: drm/bridge: analogix-anx78xx: add new variants
diff mbox series

Message ID 20190815004854.19860-2-masneyb@onstation.org
State New
Headers show
Series
  • ARM: dts: qcom: msm8974: add support for external display
Related show

Commit Message

Brian Masney Aug. 15, 2019, 12:48 a.m. UTC
Add support for the analogix,anx7808, analogix,anx7812, and
analogix,anx7818 variants.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
 .../devicetree/bindings/display/bridge/anx7814.txt          | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Linus Walleij Aug. 15, 2019, 8:17 a.m. UTC | #1
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney <masneyb@onstation.org> wrote:

> Add support for the analogix,anx7808, analogix,anx7812, and
> analogix,anx7818 variants.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
index dbd7c84ee584..17258747fff6 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
@@ -6,7 +6,11 @@  designed for portable devices.
 
 Required properties:
 
- - compatible		: "analogix,anx7814"
+ - compatible		: Must be one of:
+			  "analogix,anx7808"
+			  "analogix,anx7812"
+			  "analogix,anx7814"
+			  "analogix,anx7818"
  - reg			: I2C address of the device
  - interrupts		: Should contain the INTP interrupt
  - hpd-gpios		: Which GPIO to use for hpd