diff mbox series

arm64: dts: renesas: r8a774c0-cat874: sort nodes

Message ID 1566219341-23048-1-git-send-email-ykaneko0929@gmail.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series arm64: dts: renesas: r8a774c0-cat874: sort nodes | expand

Commit Message

Yoshihiro Kaneko Aug. 19, 2019, 12:55 p.m. UTC
Sort nodes.

If node address is present
   * Sort by node address, grouping all nodes with the same compat string
     and sorting the group alphabetically.
Else
   * Sort alphabetically

This should not have any run-time effect.

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---

This patch is based on the master branch of Geert Uytterhoeven's renesas-devel
tree.

 arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Comments

Simon Horman Aug. 21, 2019, 8:41 a.m. UTC | #1
On Mon, Aug 19, 2019 at 09:55:41PM +0900, Yoshihiro Kaneko wrote:
> Sort nodes.
> 
> If node address is present
>    * Sort by node address, grouping all nodes with the same compat string
>      and sorting the group alphabetically.
> Else
>    * Sort alphabetically
> 
> This should not have any run-time effect.
> 
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Thanks Kaneko-san,

I think that the i2c1_pins and hscif2_pins nodes
are also out of order.

I'm not sure if Geert would prefer you to respin or fix that himself.

In any case, with that problem resolved:

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> ---
> 
> This patch is based on the master branch of Geert Uytterhoeven's renesas-devel
> tree.
> 
>  arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
> index 651383c..aaa37158 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
> @@ -82,13 +82,13 @@
>  		simple-audio-card,bitclock-master = <&sndcpu>;
>  		simple-audio-card,frame-master = <&sndcpu>;
>  
> -		sndcpu: simple-audio-card,cpu {
> -			sound-dai = <&rcar_sound>;
> -		};
> -
>  		sndcodec: simple-audio-card,codec {
>  			sound-dai = <&tda19988>;
>  		};
> +
> +		sndcpu: simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
>  	};
>  
>  	vcc_sdhi0: regulator-vcc-sdhi0 {
> @@ -313,16 +313,16 @@
>  		power-source = <1800>;
>  	};
>  
> -	sound_pins: sound {
> -		groups = "ssi01239_ctrl", "ssi0_data";
> -		function = "ssi";
> -	};
> -
>  	sound_clk_pins: sound_clk {
>  		groups = "audio_clkout1_a";
>  		function = "audio_clk";
>  	};
>  
> +	sound_pins: sound {
> +		groups = "ssi01239_ctrl", "ssi0_data";
> +		function = "ssi";
> +	};
> +
>  	usb30_pins: usb30 {
>  		groups = "usb30", "usb30_id";
>  		function = "usb30";
> -- 
> 1.9.1
>
Geert Uytterhoeven Aug. 21, 2019, 8:42 a.m. UTC | #2
On Mon, Aug 19, 2019 at 2:55 PM Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> Sort nodes.
>
> If node address is present
>    * Sort by node address, grouping all nodes with the same compat string
>      and sorting the group alphabetically.
> Else
>    * Sort alphabetically
>
> This should not have any run-time effect.
>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.4.

Gr{oetje,eeting}s,

                        Geert
Geert Uytterhoeven Aug. 21, 2019, 8:46 a.m. UTC | #3
On Wed, Aug 21, 2019 at 10:41 AM Simon Horman <horms@verge.net.au> wrote:
> On Mon, Aug 19, 2019 at 09:55:41PM +0900, Yoshihiro Kaneko wrote:
> > Sort nodes.
> >
> > If node address is present
> >    * Sort by node address, grouping all nodes with the same compat string
> >      and sorting the group alphabetically.
> > Else
> >    * Sort alphabetically
> >
> > This should not have any run-time effect.
> >
> > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
>
> Thanks Kaneko-san,
>
> I think that the i2c1_pins and hscif2_pins nodes
> are also out of order.

You're right.

> I'm not sure if Geert would prefer you to respin or fix that himself.

Will fix myself.

> In any case, with that problem resolved:
>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Thanks!

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index 651383c..aaa37158 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -82,13 +82,13 @@ 
 		simple-audio-card,bitclock-master = <&sndcpu>;
 		simple-audio-card,frame-master = <&sndcpu>;
 
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&tda19988>;
 		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
 	};
 
 	vcc_sdhi0: regulator-vcc-sdhi0 {
@@ -313,16 +313,16 @@ 
 		power-source = <1800>;
 	};
 
-	sound_pins: sound {
-		groups = "ssi01239_ctrl", "ssi0_data";
-		function = "ssi";
-	};
-
 	sound_clk_pins: sound_clk {
 		groups = "audio_clkout1_a";
 		function = "audio_clk";
 	};
 
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data";
+		function = "ssi";
+	};
+
 	usb30_pins: usb30 {
 		groups = "usb30", "usb30_id";
 		function = "usb30";