[4/5] arm64: dts: meson-sm1-sei610: add HDMI display support
diff mbox series

Message ID 20190821114121.10430-5-narmstrong@baylibre.com
State Superseded
Headers show
Series
  • arm64: meson: add support for SM1 Power Domains
Related show

Commit Message

Neil Armstrong Aug. 21, 2019, 11:41 a.m. UTC
Update compatible of the pwc-vpu node and add the HDMI support nodes
for the Amlogic SM1 Based SEI610 Board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-sm1-sei610.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Kevin Hilman Aug. 21, 2019, 11:31 p.m. UTC | #1
Neil Armstrong <narmstrong@baylibre.com> writes:

> Update compatible of the pwc-vpu node and add the HDMI support nodes
> for the Amlogic SM1 Based SEI610 Board.

I think this changelog is out of date.  It's not doing anything with the
VPU pwrc node.

Kevin

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-sm1-sei610.dts     | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 12dab0ba2f26..66bd3bfbaf91 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -51,6 +51,17 @@
>  		};
>  	};
>  
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_tmds_out>;
> +			};
> +		};
> +	};
> +
>  	leds {
>  		compatible = "gpio-leds";
>  
> @@ -177,6 +188,18 @@
>  	phy-mode = "rmii";
>  };
>  
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
>  &i2c3 {
>  	status = "okay";
>  	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> -- 
> 2.22.0
Neil Armstrong Aug. 22, 2019, 8:23 a.m. UTC | #2
On 22/08/2019 01:31, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> Update compatible of the pwc-vpu node and add the HDMI support nodes
>> for the Amlogic SM1 Based SEI610 Board.
> 
> I think this changelog is out of date.  It's not doing anything with the
> VPU pwrc node.

Exact, thanks for pointing it

> 
> Kevin
> 
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  .../boot/dts/amlogic/meson-sm1-sei610.dts     | 23 +++++++++++++++++++
>>  1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
>> index 12dab0ba2f26..66bd3bfbaf91 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
>> @@ -51,6 +51,17 @@
>>  		};
>>  	};
>>  
>> +	hdmi-connector {
>> +		compatible = "hdmi-connector";
>> +		type = "a";
>> +
>> +		port {
>> +			hdmi_connector_in: endpoint {
>> +				remote-endpoint = <&hdmi_tx_tmds_out>;
>> +			};
>> +		};
>> +	};
>> +
>>  	leds {
>>  		compatible = "gpio-leds";
>>  
>> @@ -177,6 +188,18 @@
>>  	phy-mode = "rmii";
>>  };
>>  
>> +&hdmi_tx {
>> +	status = "okay";
>> +	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
>> +	pinctrl-names = "default";
>> +};
>> +
>> +&hdmi_tx_tmds_port {
>> +	hdmi_tx_tmds_out: endpoint {
>> +		remote-endpoint = <&hdmi_connector_in>;
>> +	};
>> +};
>> +
>>  &i2c3 {
>>  	status = "okay";
>>  	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
>> -- 
>> 2.22.0

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 12dab0ba2f26..66bd3bfbaf91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -51,6 +51,17 @@ 
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -177,6 +188,18 @@ 
 	phy-mode = "rmii";
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &i2c3 {
 	status = "okay";
 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;