diff mbox series

[net-next,v2,3/3] dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API

Message ID 20190821144336.9259-4-opensource@vdorst.com (mailing list archive)
State New, archived
Headers show
Series net: ethernet: mediatek: convert to PHYLINK | expand

Commit Message

René van Dorst Aug. 21, 2019, 2:43 p.m. UTC
This patch the removes the recently added mediatek,physpeed property.
Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
See mt7622-bananapi-bpi-r64.dts for a working example.

Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
--
v1->v2:
* SGMII port only support BASE-X at 2.5Gbit.
---
 .../arm/mediatek/mediatek,sgmiisys.txt        |  2 --
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 28 +++++++++++++------
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      |  1 -
 3 files changed, 19 insertions(+), 12 deletions(-)

Comments

Rob Herring (Arm) Aug. 27, 2019, 9:51 p.m. UTC | #1
On Wed, Aug 21, 2019 at 04:43:36PM +0200, René van Dorst wrote:
> This patch the removes the recently added mediatek,physpeed property.
> Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
> See mt7622-bananapi-bpi-r64.dts for a working example.
> 
> Signed-off-by: René van Dorst <opensource@vdorst.com>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> --
> v1->v2:
> * SGMII port only support BASE-X at 2.5Gbit.
> ---
>  .../arm/mediatek/mediatek,sgmiisys.txt        |  2 --

Bindings and dts files should be separate patches.


>  .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 28 +++++++++++++------
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |  1 -
>  3 files changed, 19 insertions(+), 12 deletions(-)

In any case,

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index f5518f26a914..30cb645c0e54 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -9,8 +9,6 @@  Required Properties:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
 - #clock-cells: Must be 1
-- mediatek,physpeed: Should be one of "auto", "1000" or "2500" to match up
-		     the capability of the target PHY.
 
 The SGMIISYS controller uses the common clk binding from
 Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 710c5c3d87d3..83e10591e0e5 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -115,24 +115,34 @@ 
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth_pins>;
 	status = "okay";
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
 
 	gmac1: mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
-		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
 	};
 
-	mdio-bus {
+	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "sgmii";
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index d1e13d340e26..dac51e98204c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -931,6 +931,5 @@ 
 			     "syscon";
 		reg = <0 0x1b128000 0 0x3000>;
 		#clock-cells = <1>;
-		mediatek,physpeed = "2500";
 	};
 };