@@ -1426,6 +1426,53 @@
clocks = <&xtal>;
clock-names = "xtal";
};
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson-g12a-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&rti>;
+ resets = <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_VCBUS>,
+ <&reset RESET_BT656>,
+ <&reset RESET_RDMA>,
+ <&reset RESET_VENCI>,
+ <&reset RESET_VENCP>,
+ <&reset RESET_VDAC>,
+ <&reset RESET_VDI6>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VID_LOCK>;
+ reset-names = "viu", "venc", "vcbus", "bt656",
+ "rdma", "venci", "vencp", "vdac",
+ "vdi6", "vencl", "vid_lock";
+ clocks = <&clkc CLKID_VPU>,
+ <&clkc CLKID_VAPB>;
+ clock-names = "vpu", "vapb";
+ /*
+ * VPU clocking is provided by two identical clock paths
+ * VPU_0 and VPU_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ * Same for VAPB but with a final gate after the glitch free mux.
+ */
+ assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+ <&clkc CLKID_VPU_0>,
+ <&clkc CLKID_VPU>, /* Glitch free mux */
+ <&clkc CLKID_VAPB_0_SEL>,
+ <&clkc CLKID_VAPB_0>,
+ <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_VPU_0>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_VAPB_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>, /* Do Nothing */
+ <0>, /* Do Nothing */
+ <250000000>,
+ <0>; /* Do Nothing */
+ };
};
};
@@ -1773,50 +1820,6 @@
clock-names = "xtal", "mpeg-clk";
};
- pwrc_vpu: power-controller-vpu {
- compatible = "amlogic,meson-g12a-pwrc-vpu";
- #power-domain-cells = <0>;
- amlogic,hhi-sysctrl = <&hhi>;
- resets = <&reset RESET_VIU>,
- <&reset RESET_VENC>,
- <&reset RESET_VCBUS>,
- <&reset RESET_BT656>,
- <&reset RESET_RDMA>,
- <&reset RESET_VENCI>,
- <&reset RESET_VENCP>,
- <&reset RESET_VDAC>,
- <&reset RESET_VDI6>,
- <&reset RESET_VENCL>,
- <&reset RESET_VID_LOCK>;
- clocks = <&clkc CLKID_VPU>,
- <&clkc CLKID_VAPB>;
- clock-names = "vpu", "vapb";
- /*
- * VPU clocking is provided by two identical clock paths
- * VPU_0 and VPU_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- * Same for VAPB but with a final gate after the glitch free mux.
- */
- assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_VPU>, /* Glitch free mux */
- <&clkc CLKID_VAPB_0_SEL>,
- <&clkc CLKID_VAPB_0>,
- <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_FCLK_DIV4>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VAPB_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <666666666>,
- <0>, /* Do Nothing */
- <0>, /* Do Nothing */
- <250000000>,
- <0>; /* Do Nothing */
- };
-
ao_pinctrl: pinctrl@14 {
compatible = "amlogic,meson-g12a-aobus-pinctrl";
#address-cells = <2>;
@@ -2169,7 +2172,6 @@
#address-cells = <1>;
#size-cells = <0>;
amlogic,canvas = <&canvas>;
- power-domains = <&pwrc_vpu>;
/* CVBS VDAC output port */
cvbs_vdac_port: port@0 {
@@ -4,6 +4,7 @@
*/
#include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-g12a-power.h>
/ {
compatible = "amlogic,g12a";
@@ -110,6 +111,14 @@
};
};
+ðmac {
+ power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+ power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
&sd_emmc_a {
amlogic,dram-access-quirk;
};
@@ -5,6 +5,7 @@
*/
#include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-g12a-power.h>
/ {
compatible = "amlogic,g12b";
@@ -101,6 +102,14 @@
compatible = "amlogic,g12b-clkc";
};
+ðmac {
+ power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+ power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
&sd_emmc_a {
amlogic,dram-access-quirk;
};
@@ -5,6 +5,7 @@
*/
#include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-sm1-power.h>
/ {
compatible = "amlogic,sm1";
@@ -59,10 +60,18 @@
compatible = "amlogic,meson-sm1-clk-measure";
};
-&pwrc_vpu {
- status = "disabled";
+ðmac {
+ power-domains = <&pwrc PWRC_SM1_ETH_ID>;
+};
+
+&pwrc {
+ compatible = "amlogic,meson-sm1-pwrc";
};
&vpu {
- status = "disabled";
+ power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&usb {
+ power-domains = <&pwrc PWRC_SM1_USB_ID>;
};
Replace the VPU-centric power domain controller by the generic system-wide Everything-Else power domain controller and setup the right power-domains properties on the VPU, Ethernet & USB nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../boot/dts/amlogic/meson-g12-common.dtsi | 92 ++++++++++--------- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 ++ arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 9 ++ arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 15 ++- 4 files changed, 77 insertions(+), 48 deletions(-)