[v2,4/5] arm64: dts: meson-sm1-sei610: add HDMI display support
diff mbox series

Message ID 20190823090418.17148-5-narmstrong@baylibre.com
State New
Headers show
Series
  • arm64: meson: add support for SM1 Power Domains
Related show

Commit Message

Neil Armstrong Aug. 23, 2019, 9:04 a.m. UTC
Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-sm1-sei610.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Martin Blumenstingl Aug. 25, 2019, 8 p.m. UTC | #1
On Fri, Aug 23, 2019 at 11:06 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
this looks sane so feel free to add my:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 12dab0ba2f26..66bd3bfbaf91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -51,6 +51,17 @@ 
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -177,6 +188,18 @@ 
 	phy-mode = "rmii";
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &i2c3 {
 	status = "okay";
 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;