deleted file mode 100644
@@ -1,107 +0,0 @@
-Samsung Exynos Analog to Digital Converter bindings
-
-The devicetree bindings are for the new ADC driver written for
-Exynos4 and upward SoCs from Samsung.
-
-New driver handles the following
-1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
- and future SoCs from Samsung
-2. Add ADC driver under iio/adc framework
-3. Also adds the Documentation for device tree bindings
-
-Required properties:
-- compatible: Must be "samsung,exynos-adc-v1"
- for Exynos5250 controllers.
- Must be "samsung,exynos-adc-v2" for
- future controllers.
- Must be "samsung,exynos3250-adc" for
- controllers compatible with ADC of Exynos3250.
- Must be "samsung,exynos4212-adc" for
- controllers compatible with ADC of Exynos4212 and Exynos4412.
- Must be "samsung,exynos7-adc" for
- the ADC in Exynos7 and compatibles
- Must be "samsung,s3c2410-adc" for
- the ADC in s3c2410 and compatibles
- Must be "samsung,s3c2416-adc" for
- the ADC in s3c2416 and compatibles
- Must be "samsung,s3c2440-adc" for
- the ADC in s3c2440 and compatibles
- Must be "samsung,s3c2443-adc" for
- the ADC in s3c2443 and compatibles
- Must be "samsung,s3c6410-adc" for
- the ADC in s3c6410 and compatibles
- Must be "samsung,s5pv210-adc" for
- the ADC in s5pv210 and compatibles
-- reg: List of ADC register address range
- - The base address and range of ADC register
- - The base address and range of ADC_PHY register (every
- SoC except for s3c24xx/s3c64xx ADC)
-- interrupts: Contains the interrupt information for the timer. The
- format is being dependent on which interrupt controller
- the Samsung device uses.
-- #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks From common clock bindings: handles to clocks specified
- in "clock-names" property, in the same order.
-- clock-names From common clock bindings: list of clock input names
- used by ADC block:
- - "adc" : ADC bus clock
- - "sclk" : ADC special clock (only for Exynos3250 and
- compatible ADC block)
-- vdd-supply VDD input supply.
-
-- samsung,syscon-phandle Contains the PMU system controller node
- (To access the ADC_PHY register on Exynos5250/5420/5800/3250)
-Optional properties:
-- has-touchscreen: If present, indicates that a touchscreen is
- connected an usable.
-
-Note: child nodes can be added for auto probing from device tree.
-
-Example: adding device info in dtsi file
-
-adc: adc@12d10000 {
- compatible = "samsung,exynos-adc-v1";
- reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
- #io-channel-cells = <1>;
- io-channel-ranges;
-
- clocks = <&clock 303>;
- clock-names = "adc";
-
- vdd-supply = <&buck5_reg>;
- samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-Example: adding device info in dtsi file for Exynos3250 with additional sclk
-
-adc: adc@126c0000 {
- compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
- reg = <0x126C0000 0x100>;
- interrupts = <0 137 0>;
- #io-channel-cells = <1>;
- io-channel-ranges;
-
- clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
- clock-names = "adc", "sclk";
-
- vdd-supply = <&buck5_reg>;
- samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-Example: Adding child nodes in dts file
-
-adc@12d10000 {
-
- /* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
- compatible = "murata,ncp15wb473";
- pullup-uv = <1800000>;
- pullup-ohm = <47000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 4>;
- };
-};
-
-Note: Does not apply to ADC driver under arch/arm/plat-samsung/
-Note: The child node can be added under the adc node or separately.
new file mode 100644
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Analog to Digital Converter (ADC)
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - samsung,exynos-adc-v1 # Exynos5250
+ - samsung,exynos-adc-v2
+ - samsung,exynos3250-adc
+ - samsung,exynos4212-adc # Exynos4212 and Exynos4412
+ - samsung,exynos7-adc
+ - samsung,s3c2410-adc
+ - samsung,s3c2416-adc
+ - samsung,s3c2440-adc
+ - samsung,s3c2443-adc
+ - samsung,s3c6410-adc
+ - samsung,s5pv210-adc
+ reg:
+ oneOf:
+ - items:
+ - description: base registers
+ - items:
+ # For S5P and Exynos
+ - description: base registers
+ - description: phy registers
+
+ clocks:
+ description:
+ Phandle to ADC bus clock. For Exynos3250 additional clock is needed.
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ description:
+ Must contain clock names matching phandles in clocks property.
+ oneOf:
+ - items:
+ - const: adc
+ - items:
+ # TODO: This can be in any order matching clocks, how to express it?
+ - const: adc
+ - const: sclk
+
+ interrupts:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 1
+
+ vdd-supply:
+ description: VDD input supply
+ maxItems: 1
+
+ samsung,syscon-phandle:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ # TODO: reference to PMU schema?
+ description:
+ Phandle to the PMU system controller node (to access the ADC_PHY
+ register on Exynos5250/5420/5800/3250)
+ maxItems: 1
+
+ has-touchscreen:
+ description: If present, indicates that a touchscreen is connected an usable
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - "#io-channel-cells"
+ - samsung,syscon-phandle
+ - vdd-supply
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos-adc-v1
+ - samsung,exynos-adc-v2
+ - samsung,exynos3250-adc
+ - samsung,exynos4212-adc
+ - samsung,exynos7-adc
+ - samsung,s5pv210-adc
+ then:
+ properties:
+ reg:
+ items:
+ # For S5P and Exynos
+ - description: base registers
+ - description: phy registers
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos3250-adc
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: adc
+ - const: sclk
+
+examples:
+ - |
+ adc: adc@12d10000 {
+ compatible = "samsung,exynos-adc-v1";
+ reg = <0x12d10000 0x100>;
+ interrupts = <0 106 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&clock 303>;
+ clock-names = "adc";
+
+ vdd-supply = <&buck5_reg>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+
+ /* NTC thermistor is a hwmon device */
+ ncp15wb473@0 {
+ compatible = "murata,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <47000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 4>;
+ };
+ };
+
+ - |
+ adc@126c0000 {
+ compatible = "samsung,exynos3250-adc";
+ reg = <0x126C0000 0x100>;
+ interrupts = <0 137 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&cmu 0>, // CLK_TSADC
+ <&cmu 1>; // CLK_SCLK_TSADC
+ clock-names = "adc", "sclk";
+
+ vdd-supply = <&buck5_reg>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
Convert Samsung Exynos Analog to Digital Converter bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../bindings/iio/adc/samsung,exynos-adc.txt | 107 ------------ .../bindings/iio/adc/samsung,exynos-adc.yaml | 159 ++++++++++++++++++ 2 files changed, 159 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml