[v3,4/7] serial: fsl_linflexuart: Be consistent with the name
diff mbox series

Message ID 20190823191115.18490-5-stefan-gabriel.mirea@nxp.com
State New
Headers show
Series
  • Add initial support for S32V234-EVB
Related show

Commit Message

Stefan-gabriel Mirea Aug. 23, 2019, 7:11 p.m. UTC
For consistency reasons, spell the controller name as "LINFlexD" in
comments and documentation.

Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
---
 Documentation/admin-guide/kernel-parameters.txt | 2 +-
 drivers/tty/serial/Kconfig                      | 8 ++++----
 drivers/tty/serial/fsl_linflexuart.c            | 4 ++--
 include/uapi/linux/serial_core.h                | 4 ++--
 4 files changed, 9 insertions(+), 9 deletions(-)

Comments

Greg KH Sept. 4, 2019, 7:52 a.m. UTC | #1
On Fri, Aug 23, 2019 at 07:11:37PM +0000, Stefan-gabriel Mirea wrote:
> For consistency reasons, spell the controller name as "LINFlexD" in
> comments and documentation.
> 
> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
> ---
>  Documentation/admin-guide/kernel-parameters.txt | 2 +-
>  drivers/tty/serial/Kconfig                      | 8 ++++----
>  drivers/tty/serial/fsl_linflexuart.c            | 4 ++--
>  include/uapi/linux/serial_core.h                | 4 ++--
>  4 files changed, 9 insertions(+), 9 deletions(-)

Doesn't apply to my tty-next tree :(
Stefan-gabriel Mirea Sept. 5, 2019, 11:32 a.m. UTC | #2
Hello Greg,

On 9/4/2019 10:53 AM, gregkh@linuxfoundation.org wrote:
> On Fri, Aug 23, 2019 at 07:11:37PM +0000, Stefan-gabriel Mirea wrote:
>> For consistency reasons, spell the controller name as "LINFlexD" in
>> comments and documentation.
>>
>> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
>> ---
>>  Documentation/admin-guide/kernel-parameters.txt | 2 +-
>>  drivers/tty/serial/Kconfig                      | 8 ++++----
>>  drivers/tty/serial/fsl_linflexuart.c            | 4 ++--
>>  include/uapi/linux/serial_core.h                | 4 ++--
>>  4 files changed, 9 insertions(+), 9 deletions(-)
> 
> Doesn't apply to my tty-next tree :(

Thanks for letting me know; I will fix this in v4.

Regards,
Stefan

Patch
diff mbox series

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 4d545732aadc..81773425fb31 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1091,7 +1091,7 @@ 
 			mapped with the correct attributes.
 
 		linflex,<addr>
-			Use early console provided by Freescale LinFlex UART
+			Use early console provided by Freescale LINFlexD UART
 			serial driver for NXP S32V234 SoCs. A valid base
 			address must be provided, and the serial port must
 			already be setup and configured.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b4fa2f7c96bd..3039c1ff68a9 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1453,18 +1453,18 @@  config SERIAL_FSL_LPUART_CONSOLE
 	  you can make it the console by answering Y to this option.
 
 config SERIAL_FSL_LINFLEXUART
-	tristate "Freescale linflexuart serial port support"
+	tristate "Freescale LINFlexD UART serial port support"
 	select SERIAL_CORE
 	help
-	  Support for the on-chip linflexuart on some Freescale SOCs.
+	  Support for the on-chip LINFlexD UART on some Freescale SOCs.
 
 config SERIAL_FSL_LINFLEXUART_CONSOLE
-	bool "Console on Freescale linflexuart serial port"
+	bool "Console on Freescale LINFlexD UART serial port"
 	depends on SERIAL_FSL_LINFLEXUART=y
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 	help
-	  If you have enabled the linflexuart serial port on the Freescale
+	  If you have enabled the LINFlexD UART serial port on the Freescale
 	  SoCs, you can make it the console by answering Y to this option.
 
 config SERIAL_CONEXANT_DIGICOLOR
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index e54c65830e5e..b5889f8d80cb 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Freescale linflexuart serial port driver
+ * Freescale LINFlexD UART serial port driver
  *
  * Copyright 2012-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP
@@ -938,5 +938,5 @@  static void __exit linflex_serial_exit(void)
 module_init(linflex_serial_init);
 module_exit(linflex_serial_exit);
 
-MODULE_DESCRIPTION("Freescale linflex serial port driver");
+MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
 MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index f9e829416dcc..33bd9c411a31 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -296,7 +296,7 @@ 
 /* Sunix UART */
 #define PORT_SUNIX	121
 
-/* Freescale Linflex UART */
-#define PORT_LINFLEXUART	121
+/* Freescale LINFlexD UART */
+#define PORT_LINFLEXUART	122
 
 #endif /* _UAPILINUX_SERIAL_CORE_H */