Message ID | 20190826153800.35400-1-git@andred.net (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB | expand |
On Mon, Aug 26, 2019 at 04:37:49PM +0100, André Draszik wrote: > Whether and which USB port is enabled and how they > are powered is a function of the carrier board, not > of the SoM. Different carrier boards can have different > ports enabled / wired up, and power them differently; > so this should really move into the respective DTS. > > Do so and update the USB power supply to reflect > the actual situation on the sbc-imx7 carrier board. > > Signed-off-by: André Draszik <git@andred.net> > Cc: Ilya Ledvich <ilya@compulab.co.il> > Cc: Igor Grinberg <grinberg@compulab.co.il> Ilya, Igor, can you have a look at the series? Shawn > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > --- > arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 24 ------------------------ > arch/arm/boot/dts/imx7d-sbc-imx7.dts | 13 +++++++++++++ > 2 files changed, 13 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > index 62d5e9a4a781..6f7e85cf0c28 100644 > --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > @@ -22,15 +22,6 @@ > device_type = "memory"; > reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ > }; > - > - reg_usb_otg1_vbus: regulator-vbus { > - compatible = "regulator-fixed"; > - regulator-name = "usb_otg1_vbus"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; > - enable-active-high; > - }; > }; > > &cpu0 { > @@ -193,13 +184,6 @@ > status = "okay"; > }; > > -&usbotg1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_usbotg1>; > - vbus-supply = <®_usb_otg1_vbus>; > - status = "okay"; > -}; > - > &usdhc3 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usdhc3>; > @@ -278,11 +262,3 @@ > >; > }; > }; > - > -&iomuxc_lpsr { > - pinctrl_usbotg1: usbotg1grp { > - fsl,pins = < > - MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ > - >; > - }; > -}; > diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts > index f8a868552707..aab646903de3 100644 > --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts > +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts > @@ -15,6 +15,14 @@ > / { > model = "CompuLab SBC-iMX7"; > compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d"; > + > + reg_usb_vbus: regulator-usb-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > }; > > &usdhc1 { > @@ -26,6 +34,11 @@ > status = "okay"; > }; > > +&&usbotg1 { > + vbus-supply = <®_usb_vbus>; > + status = "okay"; > +}; > + > &iomuxc { > pinctrl_usdhc1: usdhc1grp { > fsl,pins = < > -- > 2.23.0.rc1 >
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 62d5e9a4a781..6f7e85cf0c28 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -22,15 +22,6 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ }; - - reg_usb_otg1_vbus: regulator-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; }; &cpu0 { @@ -193,13 +184,6 @@ status = "okay"; }; -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1>; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -278,11 +262,3 @@ >; }; }; - -&iomuxc_lpsr { - pinctrl_usbotg1: usbotg1grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts index f8a868552707..aab646903de3 100644 --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts @@ -15,6 +15,14 @@ / { model = "CompuLab SBC-iMX7"; compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d"; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &usdhc1 { @@ -26,6 +34,11 @@ status = "okay"; }; +&&usbotg1 { + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + &iomuxc { pinctrl_usdhc1: usdhc1grp { fsl,pins = <
Whether and which USB port is enabled and how they are powered is a function of the carrier board, not of the SoM. Different carrier boards can have different ports enabled / wired up, and power them differently; so this should really move into the respective DTS. Do so and update the USB power supply to reflect the actual situation on the sbc-imx7 carrier board. Signed-off-by: André Draszik <git@andred.net> Cc: Ilya Ledvich <ilya@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 24 ------------------------ arch/arm/boot/dts/imx7d-sbc-imx7.dts | 13 +++++++++++++ 2 files changed, 13 insertions(+), 24 deletions(-)