diff mbox series

[CI,6/8] drm/i915/tgl: Implement TGL DisplayPort training sequence

Message ID 20190826205459.29447-6-lucas.demarchi@intel.com (mailing list archive)
State New, archived
Headers show
Series [CI,1/8] drm/i915/tgl: Guard and warn if more than one eDP panel is present | expand

Commit Message

Lucas De Marchi Aug. 26, 2019, 8:54 p.m. UTC
From: José Roberto de Souza <jose.souza@intel.com>

On TGL some registers moved from DDI to transcoder and the
DisplayPort training sequence has a separate BSpec page.

I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but
it was becoming really hard to follow, so a new and cleaner function
for TGL was added with comments of all steps. It's similar to ICL,
but different enough to deserve a new function.

The rest of DisplayPort enable and the whole disable sequences
remained the same.

v2: FEC and DSC should be enabled on sink side before start link
training(Maarten reported and Manasi confirmed the DSC part)

v3: Add call to enable FEC on step 7.l(Manasi)

BSpec: 49190
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-16-lucas.demarchi@intel.com
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 139 ++++++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_dp.c  |   8 +-
 2 files changed, 139 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 8eb2b3ec01ed..7fb5b53d50c2 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1761,7 +1761,14 @@  void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
 	I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
 }
 
-void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
+/*
+ * Returns the TRANS_DDI_FUNC_CTL value based on CRTC state.
+ *
+ * Only intended to be used by intel_ddi_enable_transcoder_func() and
+ * intel_ddi_config_transcoder_func().
+ */
+static u32
+intel_ddi_transcoder_func_reg_val_get(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
 	struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
@@ -1845,6 +1852,33 @@  void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
 		temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
 	}
 
+	return temp;
+}
+
+void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+	u32 temp;
+
+	temp = intel_ddi_transcoder_func_reg_val_get(crtc_state);
+	I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
+}
+
+/*
+ * Same as intel_ddi_enable_transcoder_func() but it do not set the enable bit
+ */
+static void
+intel_ddi_config_transcoder_func(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+	u32 temp;
+
+	temp = intel_ddi_transcoder_func_reg_val_get(crtc_state);
+	temp &= ~TRANS_DDI_FUNC_ENABLE;
 	I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
 }
 
@@ -3160,9 +3194,94 @@  static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
 	POSTING_READ(DP_TP_CTL(port));
 }
 
-static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
-				    const struct intel_crtc_state *crtc_state,
-				    const struct drm_connector_state *conn_state)
+static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
+				  const struct intel_crtc_state *crtc_state,
+				  const struct drm_connector_state *conn_state)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
+	int level = intel_ddi_dp_level(intel_dp);
+
+	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
+				 crtc_state->lane_count, is_mst);
+
+	/* 1.a got on intel_atomic_commit_tail() */
+
+	/* 2. */
+	intel_edp_panel_on(intel_dp);
+
+	/*
+	 * 1.b, 3. and 4. is done before tgl_ddi_pre_enable_dp() by:
+	 * haswell_crtc_enable()->intel_encoders_pre_pll_enable() and
+	 * haswell_crtc_enable()->intel_enable_shared_dpll()
+	 */
+
+	/* 5. */
+	if (!intel_phy_is_tc(dev_priv, phy) ||
+	    dig_port->tc_mode != TC_PORT_TBT_ALT)
+		intel_display_power_get(dev_priv,
+					dig_port->ddi_io_power_domain);
+
+	/* 6. */
+	icl_program_mg_dp_mode(dig_port);
+
+	/*
+	 * 7.a - Steps in this function should only be executed over MST
+	 * master, what will be taken in care by MST hook
+	 * intel_mst_pre_enable_dp()
+	 */
+	intel_ddi_enable_pipe_clock(crtc_state);
+
+	/* 7.b */
+	intel_ddi_config_transcoder_func(crtc_state);
+
+	/* 7.d */
+	icl_disable_phy_clock_gating(dig_port);
+
+	/* 7.e */
+	icl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
+				encoder->type);
+
+	/* 7.f */
+	if (intel_phy_is_combo(dev_priv, phy)) {
+		bool lane_reversal =
+			dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+
+		intel_combo_phy_power_up_lanes(dev_priv, phy, false,
+					       crtc_state->lane_count,
+					       lane_reversal);
+	}
+
+	/* 7.g */
+	intel_ddi_init_dp_buf_reg(encoder);
+
+	if (!is_mst)
+		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+
+	intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true);
+	/*
+	 * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit
+	 * in the FEC_CONFIGURATION register to 1 before initiating link
+	 * training
+	 */
+	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
+	/* 7.c, 7.h, 7.i, 7.j */
+	intel_dp_start_link_train(intel_dp);
+
+	/* 7.k */
+	intel_dp_stop_link_train(intel_dp);
+
+	/* 7.l */
+	intel_ddi_enable_fec(encoder, crtc_state);
+	intel_dsc_enable(encoder, crtc_state);
+}
+
+static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
+				  const struct intel_crtc_state *crtc_state,
+				  const struct drm_connector_state *conn_state)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -3228,6 +3347,18 @@  static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	intel_dsc_enable(encoder, crtc_state);
 }
 
+static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
+				    const struct intel_crtc_state *crtc_state,
+				    const struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+	if (INTEL_GEN(dev_priv) >= 12)
+		tgl_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+	else
+		hsw_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+}
+
 static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
 				      const struct intel_crtc_state *crtc_state,
 				      const struct drm_connector_state *conn_state)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 23908da1cd5d..f74594d8d9df 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3954,13 +3954,13 @@  void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
 	I915_WRITE(DP_TP_CTL(port), val);
 
 	/*
-	 * On PORT_A we can have only eDP in SST mode. There the only reason
-	 * we need to set idle transmission mode is to work around a HW issue
-	 * where we enable the pipe while not in idle link-training mode.
+	 * Until TGL on PORT_A we can have only eDP in SST mode. There the only
+	 * reason we need to set idle transmission mode is to work around a HW
+	 * issue where we enable the pipe while not in idle link-training mode.
 	 * In this case there is requirement to wait for a minimum number of
 	 * idle patterns to be sent.
 	 */
-	if (port == PORT_A)
+	if (port == PORT_A && INTEL_GEN(dev_priv) < 12)
 		return;
 
 	if (intel_de_wait_for_set(dev_priv, DP_TP_STATUS(port),