diff mbox series

[v3,1/3] fbdev: fix numbering of fbcon options

Message ID 20190827110854.12574-2-peda@axentia.se (mailing list archive)
State New, archived
Headers show
Series Add possibility to specify the number of displayed logos | expand

Commit Message

Peter Rosin Aug. 27, 2019, 11:09 a.m. UTC
Three shall be the number thou shalt count, and the number of the
counting shall be three. Four shalt thou not count...

One! Two! Five!

Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 Documentation/fb/fbcon.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Geert Uytterhoeven Aug. 27, 2019, 11:25 a.m. UTC | #1
On Tue, Aug 27, 2019 at 1:09 PM Peter Rosin <peda@axentia.se> wrote:
> Three shall be the number thou shalt count, and the number of the
> counting shall be three. Four shalt thou not count...
>
> One! Two! Five!
>
> Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
> Signed-off-by: Peter Rosin <peda@axentia.se>

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert
Bartlomiej Zolnierkiewicz Jan. 3, 2020, 11:51 a.m. UTC | #2
On 8/27/19 1:09 PM, Peter Rosin wrote:
> Three shall be the number thou shalt count, and the number of the
> counting shall be three. Four shalt thou not count...
> 
> One! Two! Five!
> 
> Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
> Signed-off-by: Peter Rosin <peda@axentia.se>

Thanks, patch queued for v5.6 (also sorry for the delay).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
>  Documentation/fb/fbcon.rst | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
> index ebca41785abe..65ba40255137 100644
> --- a/Documentation/fb/fbcon.rst
> +++ b/Documentation/fb/fbcon.rst
> @@ -127,7 +127,7 @@ C. Boot options
>  	is typically located on the same video card.  Thus, the consoles that
>  	are controlled by the VGA console will be garbled.
>  
> -4. fbcon=rotate:<n>
> +5. fbcon=rotate:<n>
>  
>  	This option changes the orientation angle of the console display. The
>  	value 'n' accepts the following:
> @@ -152,21 +152,21 @@ C. Boot options
>  	Actually, the underlying fb driver is totally ignorant of console
>  	rotation.
>  
> -5. fbcon=margin:<color>
> +6. fbcon=margin:<color>
>  
>  	This option specifies the color of the margins. The margins are the
>  	leftover area at the right and the bottom of the screen that are not
>  	used by text. By default, this area will be black. The 'color' value
>  	is an integer number that depends on the framebuffer driver being used.
>  
> -6. fbcon=nodefer
> +7. fbcon=nodefer
>  
>  	If the kernel is compiled with deferred fbcon takeover support, normally
>  	the framebuffer contents, left in place by the firmware/bootloader, will
>  	be preserved until there actually is some text is output to the console.
>  	This option causes fbcon to bind immediately to the fbdev device.
>  
> -7. fbcon=logo-pos:<location>
> +8. fbcon=logo-pos:<location>
>  
>  	The only possible 'location' is 'center' (without quotes), and when
>  	given, the bootup logo is moved from the default top-left corner
diff mbox series

Patch

diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index ebca41785abe..65ba40255137 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -127,7 +127,7 @@  C. Boot options
 	is typically located on the same video card.  Thus, the consoles that
 	are controlled by the VGA console will be garbled.
 
-4. fbcon=rotate:<n>
+5. fbcon=rotate:<n>
 
 	This option changes the orientation angle of the console display. The
 	value 'n' accepts the following:
@@ -152,21 +152,21 @@  C. Boot options
 	Actually, the underlying fb driver is totally ignorant of console
 	rotation.
 
-5. fbcon=margin:<color>
+6. fbcon=margin:<color>
 
 	This option specifies the color of the margins. The margins are the
 	leftover area at the right and the bottom of the screen that are not
 	used by text. By default, this area will be black. The 'color' value
 	is an integer number that depends on the framebuffer driver being used.
 
-6. fbcon=nodefer
+7. fbcon=nodefer
 
 	If the kernel is compiled with deferred fbcon takeover support, normally
 	the framebuffer contents, left in place by the firmware/bootloader, will
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
-7. fbcon=logo-pos:<location>
+8. fbcon=logo-pos:<location>
 
 	The only possible 'location' is 'center' (without quotes), and when
 	given, the bootup logo is moved from the default top-left corner