| Message ID | 20190828151706.32643-1-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: omap4-droid4: Allow 350mA current for USB peripherals | expand |
* Tony Lindgren <tony@atomide.com> [190828 08:17]: > Looks like we can use some USB Ethernet dongles for example if we increase > the allowed power limit. > > A similar PMIC MC13783 documents maximum current limit as 350 mA in in > "Table 10-3. VUSB Regulator Main Characteristics". Since we have no > other documentation, let's use that value as the limit. Oops, that's too much, it's not VUSB regulator but VBUS regulator that lists 300 mA max instead of 350 mA for VUSB regulator. Updated patch below. Regards, Tony 8< ------------------------ From tony Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony@atomide.com> Date: Wed, 28 Aug 2019 08:11:26 -0700 Subject: [PATCH] ARM: dts: omap4-droid4: Allow 300mA current for USB peripherals Looks like we can use some USB Ethernet dongles for example if we increase the allowed power limit. A similar PMIC MC13783 documents maximum current limit as 300 mA in in "Table 10-4. VBUS Regulator Main Characteristics". Since we have no other documentation, let's use that value as the limit. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -781,7 +781,12 @@ &usb_otg_hs { interface-type = <1>; mode = <3>; - power = <50>; + + /* + * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. + * VBUS Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <150>; }; &i2c4 {
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -781,7 +781,12 @@ &usb_otg_hs { interface-type = <1>; mode = <3>; - power = <50>; + + /* + * Max 350 mA steps based on similar PMIC MC13783UG.pdf "Table 10-3. + * VUSB Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <175>; }; &i2c4 {
Looks like we can use some USB Ethernet dongles for example if we increase the allowed power limit. A similar PMIC MC13783 documents maximum current limit as 350 mA in in "Table 10-3. VUSB Regulator Main Characteristics". Since we have no other documentation, let's use that value as the limit. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)