[v3,15/16] phy: phy-mmp3-usb: add a new driver
diff mbox series

Message ID 20190830220743.439670-16-lkundrak@v3.sk
State New
Headers show
Series
  • Initial support for Marvell MMP3 SoC
Related show

Commit Message

Lubomir Rintel Aug. 30, 2019, 10:07 p.m. UTC
This is the USB2 PHY as found on the Marvell MMP3 SoC. Based on Marvell GPL
release.

While at that, also add a MAINTAINERS entry including the other MMP PHY
driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 MAINTAINERS                        |   7 +
 drivers/phy/marvell/Kconfig        |  11 ++
 drivers/phy/marvell/Makefile       |   1 +
 drivers/phy/marvell/phy-mmp3-usb.c | 291 +++++++++++++++++++++++++++++
 4 files changed, 310 insertions(+)
 create mode 100644 drivers/phy/marvell/phy-mmp3-usb.c

Comments

Kishon Vijay Abraham I Oct. 10, 2019, 8:58 a.m. UTC | #1
Hi,

On 31/08/19 3:37 AM, Lubomir Rintel wrote:

Change the $subject to "phy: Add USB2 PHY driver for Marvell MMP3 SoC"
> This is the USB2 PHY as found on the Marvell MMP3 SoC. Based on Marvell GPL
> release.

Just have "Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC." here.
> 
> While at that, also add a MAINTAINERS entry including the other MMP PHY
> driver.

Adding MAINTAINERS could be a different patch.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

Once the commit log is fixed:
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

Thanks
Kishon
> ---
>  MAINTAINERS                        |   7 +
>  drivers/phy/marvell/Kconfig        |  11 ++
>  drivers/phy/marvell/Makefile       |   1 +
>  drivers/phy/marvell/phy-mmp3-usb.c | 291 +++++++++++++++++++++++++++++
>  4 files changed, 310 insertions(+)
>  create mode 100644 drivers/phy/marvell/phy-mmp3-usb.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 176ef19f0b9db..449349f8f20bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10799,6 +10799,13 @@ F:	arch/arm/boot/dts/mmp*
>  F:	arch/arm/mach-mmp/
>  F:	linux/soc/mmp/
>  
> +MMP USB PHY DRIVERS
> +R:	Lubomir Rintel <lkundrak@v3.sk>
> +L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +S:	Maintained
> +F:	drivers/phy/marvell/phy-mmp3-usb.c
> +F:	drivers/phy/marvell/phy-pxa-usb.c
> +
>  MMU GATHER AND TLB INVALIDATION
>  M:	Will Deacon <will@kernel.org>
>  M:	"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
> diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
> index 0e1642419c0bf..d33ef35b3e51b 100644
> --- a/drivers/phy/marvell/Kconfig
> +++ b/drivers/phy/marvell/Kconfig
> @@ -102,3 +102,14 @@ config PHY_PXA_USB
>  	  The PHY driver will be used by Marvell udc/ehci/otg driver.
>  
>  	  To compile this driver as a module, choose M here.
> +
> +config PHY_MMP3_USB
> +	tristate "Marvell MMP3 USB PHY Driver"
> +	depends on MACH_MMP3_DT || COMPILE_TEST
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support Marvell MMP3 USB PHY driver for Marvell
> +	  SoC. This driver will do the PHY initialization and shutdown.
> +	  The PHY driver will be used by Marvell udc/ehci/otg driver.
> +
> +	  To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
> index 434eb9ca6cc3f..5a106b1549f41 100644
> --- a/drivers/phy/marvell/Makefile
> +++ b/drivers/phy/marvell/Makefile
> @@ -2,6 +2,7 @@
>  obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
>  obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
>  obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
> +obj-$(CONFIG_PHY_MMP3_USB)		+= phy-mmp3-usb.o
>  obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY)	+= phy-mvebu-a3700-comphy.o
>  obj-$(CONFIG_PHY_MVEBU_A3700_UTMI)	+= phy-mvebu-a3700-utmi.o
>  obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY)	+= phy-armada38x-comphy.o
> diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c
> new file mode 100644
> index 0000000000000..499869595a582
> --- /dev/null
> +++ b/drivers/phy/marvell/phy-mmp3-usb.c
> @@ -0,0 +1,291 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
> + * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/mmp/cputype.h>
> +
> +#define USB2_PLL_REG0		0x4
> +#define USB2_PLL_REG1		0x8
> +#define USB2_TX_REG0		0x10
> +#define USB2_TX_REG1		0x14
> +#define USB2_TX_REG2		0x18
> +#define USB2_RX_REG0		0x20
> +#define USB2_RX_REG1		0x24
> +#define USB2_RX_REG2		0x28
> +#define USB2_ANA_REG0		0x30
> +#define USB2_ANA_REG1		0x34
> +#define USB2_ANA_REG2		0x38
> +#define USB2_DIG_REG0		0x3C
> +#define USB2_DIG_REG1		0x40
> +#define USB2_DIG_REG2		0x44
> +#define USB2_DIG_REG3		0x48
> +#define USB2_TEST_REG0		0x4C
> +#define USB2_TEST_REG1		0x50
> +#define USB2_TEST_REG2		0x54
> +#define USB2_CHARGER_REG0	0x58
> +#define USB2_OTG_REG0		0x5C
> +#define USB2_PHY_MON0		0x60
> +#define USB2_RESETVE_REG0	0x64
> +#define USB2_ICID_REG0		0x78
> +#define USB2_ICID_REG1		0x7C
> +
> +/* USB2_PLL_REG0 */
> +
> +/* This is for Ax stepping */
> +#define USB2_PLL_FBDIV_SHIFT_MMP3		0
> +#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
> +
> +#define USB2_PLL_REFDIV_SHIFT_MMP3		8
> +#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
> +
> +#define USB2_PLL_VDD12_SHIFT_MMP3		12
> +#define USB2_PLL_VDD18_SHIFT_MMP3		14
> +
> +/* This is for B0 stepping */
> +#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
> +#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
> +#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
> +#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
> +#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
> +
> +#define USB2_PLL_CAL12_SHIFT_MMP3		0
> +#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
> +
> +#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
> +
> +#define USB2_PLL_KVCO_SHIFT_MMP3		4
> +#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
> +
> +#define USB2_PLL_ICP_SHIFT_MMP3			8
> +#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
> +
> +#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
> +
> +#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
> +#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
> +
> +#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
> +
> +/* USB2_TX_REG0 */
> +#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
> +#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
> +
> +#define USB2_TX_RCAL_START_SHIFT_MMP3		13
> +
> +/* USB2_TX_REG1 */
> +#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
> +#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
> +
> +#define USB2_TX_AMP_SHIFT_MMP3			4
> +#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
> +
> +#define USB2_TX_VDD12_SHIFT_MMP3		8
> +#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
> +
> +/* USB2_TX_REG2 */
> +#define USB2_TX_DRV_SLEWRATE_SHIFT		10
> +
> +/* USB2_RX_REG0 */
> +#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
> +#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
> +
> +#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
> +#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
> +
> +/* USB2_ANA_REG1*/
> +#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
> +
> +/* USB2_OTG_REG0 */
> +#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
> +
> +struct mmp3_usb_phy {
> +	struct phy *phy;
> +	void __iomem *base;
> +};
> +
> +static unsigned int u2o_get(void __iomem *base, unsigned int offset)
> +{
> +	return readl_relaxed(base + offset);
> +}
> +
> +static void u2o_set(void __iomem *base, unsigned int offset,
> +		unsigned int value)
> +{
> +	u32 reg;
> +
> +	reg = readl_relaxed(base + offset);
> +	reg |= value;
> +	writel_relaxed(reg, base + offset);
> +	readl_relaxed(base + offset);
> +}
> +
> +static void u2o_clear(void __iomem *base, unsigned int offset,
> +		unsigned int value)
> +{
> +	u32 reg;
> +
> +	reg = readl_relaxed(base + offset);
> +	reg &= ~value;
> +	writel_relaxed(reg, base + offset);
> +	readl_relaxed(base + offset);
> +}
> +
> +static int mmp3_usb_phy_init(struct phy *phy)
> +{
> +	struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
> +	void __iomem *base = mmp3_usb_phy->base;
> +
> +	if (cpu_is_mmp3_a0()) {
> +		u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3
> +			| USB2_PLL_REFDIV_MASK_MMP3));
> +		u2o_set(base, USB2_PLL_REG0,
> +			0xd << USB2_PLL_REFDIV_SHIFT_MMP3
> +			| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3);
> +	} else if (cpu_is_mmp3_b0()) {
> +		u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0
> +			| USB2_PLL_FBDIV_MASK_MMP3_B0);
> +		u2o_set(base, USB2_PLL_REG0,
> +			0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0
> +			| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0);
> +	} else {
> +		dev_err(&phy->dev, "unsupported silicon revision\n");
> +		return -ENODEV;
> +	}
> +
> +	u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK
> +		| USB2_PLL_ICP_MASK_MMP3
> +		| USB2_PLL_KVCO_MASK_MMP3
> +		| USB2_PLL_CALI12_MASK_MMP3);
> +	u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3
> +		| 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3
> +		| 3 << USB2_PLL_ICP_SHIFT_MMP3
> +		| 3 << USB2_PLL_KVCO_SHIFT_MMP3
> +		| 3 << USB2_PLL_CAL12_SHIFT_MMP3);
> +
> +	u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3);
> +	u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3);
> +
> +	u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3
> +		| USB2_TX_AMP_MASK_MMP3
> +		| USB2_TX_CK60_PHSEL_MASK_MMP3);
> +	u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3
> +		| 4 << USB2_TX_AMP_SHIFT_MMP3
> +		| 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3);
> +
> +	u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT);
> +	u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT);
> +
> +	u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3);
> +	u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3);
> +
> +	u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3);
> +
> +	u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3);
> +
> +	return 0;
> +}
> +
> +static int mmp3_usb_phy_calibrate(struct phy *phy)
> +{
> +	struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
> +	void __iomem *base = mmp3_usb_phy->base;
> +	int loops;
> +
> +	/*
> +	 * PLL VCO and TX Impedance Calibration Timing:
> +	 *
> +	 *                _____________________________________
> +	 * PU  __________|
> +	 *                        _____________________________
> +	 * VCOCAL START _________|
> +	 *                                 ___
> +	 * REG_RCAL_START ________________|   |________|_______
> +	 *               | 200us | 400us  | 40| 400us  | USB PHY READY
> +	 */
> +
> +	udelay(200);
> +	u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3);
> +	udelay(400);
> +	u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
> +	udelay(40);
> +	u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
> +	udelay(400);
> +
> +	loops = 0;
> +	while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) {
> +		mdelay(1);
> +		loops++;
> +		if (loops > 100) {
> +			dev_err(&phy->dev, "PLL_READY not set after 100mS.\n");
> +			return -ETIMEDOUT;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops mmp3_usb_phy_ops = {
> +	.init		= mmp3_usb_phy_init,
> +	.calibrate	= mmp3_usb_phy_calibrate,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static const struct of_device_id mmp3_usb_phy_of_match[] = {
> +	{ .compatible = "marvell,mmp3-usb-phy", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
> +
> +static int mmp3_usb_phy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct resource *resource;
> +	struct mmp3_usb_phy *mmp3_usb_phy;
> +	struct phy_provider *provider;
> +
> +	mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL);
> +	if (!mmp3_usb_phy)
> +		return -ENOMEM;
> +
> +	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	mmp3_usb_phy->base = devm_ioremap_resource(dev, resource);
> +	if (IS_ERR(mmp3_usb_phy->base)) {
> +		dev_err(dev, "failed to remap PHY regs\n");
> +		return PTR_ERR(mmp3_usb_phy->base);
> +	}
> +
> +	mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops);
> +	if (IS_ERR(mmp3_usb_phy->phy)) {
> +		dev_err(dev, "failed to create PHY\n");
> +		return PTR_ERR(mmp3_usb_phy->phy);
> +	}
> +
> +	phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy);
> +	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	if (IS_ERR(provider)) {
> +		dev_err(dev, "failed to register PHY provider\n");
> +		return PTR_ERR(provider);
> +	}
> +
> +	return 0;
> +}
> +
> +static struct platform_driver mmp3_usb_phy_driver = {
> +	.probe		= mmp3_usb_phy_probe,
> +	.driver		= {
> +		.name	= "mmp3-usb-phy",
> +		.of_match_table = mmp3_usb_phy_of_match,
> +	},
> +};
> +module_platform_driver(mmp3_usb_phy_driver);
> +
> +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
> +MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver");
> +MODULE_LICENSE("GPL v2");
>

Patch
diff mbox series

diff --git a/MAINTAINERS b/MAINTAINERS
index 176ef19f0b9db..449349f8f20bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10799,6 +10799,13 @@  F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
 F:	linux/soc/mmp/
 
+MMP USB PHY DRIVERS
+R:	Lubomir Rintel <lkundrak@v3.sk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/phy/marvell/phy-mmp3-usb.c
+F:	drivers/phy/marvell/phy-pxa-usb.c
+
 MMU GATHER AND TLB INVALIDATION
 M:	Will Deacon <will@kernel.org>
 M:	"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 0e1642419c0bf..d33ef35b3e51b 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -102,3 +102,14 @@  config PHY_PXA_USB
 	  The PHY driver will be used by Marvell udc/ehci/otg driver.
 
 	  To compile this driver as a module, choose M here.
+
+config PHY_MMP3_USB
+	tristate "Marvell MMP3 USB PHY Driver"
+	depends on MACH_MMP3_DT || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell MMP3 USB PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+	  To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 434eb9ca6cc3f..5a106b1549f41 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -2,6 +2,7 @@ 
 obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
+obj-$(CONFIG_PHY_MMP3_USB)		+= phy-mmp3-usb.o
 obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY)	+= phy-mvebu-a3700-comphy.o
 obj-$(CONFIG_PHY_MVEBU_A3700_UTMI)	+= phy-mvebu-a3700-utmi.o
 obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY)	+= phy-armada38x-comphy.o
diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c
new file mode 100644
index 0000000000000..499869595a582
--- /dev/null
+++ b/drivers/phy/marvell/phy-mmp3-usb.c
@@ -0,0 +1,291 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/soc/mmp/cputype.h>
+
+#define USB2_PLL_REG0		0x4
+#define USB2_PLL_REG1		0x8
+#define USB2_TX_REG0		0x10
+#define USB2_TX_REG1		0x14
+#define USB2_TX_REG2		0x18
+#define USB2_RX_REG0		0x20
+#define USB2_RX_REG1		0x24
+#define USB2_RX_REG2		0x28
+#define USB2_ANA_REG0		0x30
+#define USB2_ANA_REG1		0x34
+#define USB2_ANA_REG2		0x38
+#define USB2_DIG_REG0		0x3C
+#define USB2_DIG_REG1		0x40
+#define USB2_DIG_REG2		0x44
+#define USB2_DIG_REG3		0x48
+#define USB2_TEST_REG0		0x4C
+#define USB2_TEST_REG1		0x50
+#define USB2_TEST_REG2		0x54
+#define USB2_CHARGER_REG0	0x58
+#define USB2_OTG_REG0		0x5C
+#define USB2_PHY_MON0		0x60
+#define USB2_RESETVE_REG0	0x64
+#define USB2_ICID_REG0		0x78
+#define USB2_ICID_REG1		0x7C
+
+/* USB2_PLL_REG0 */
+
+/* This is for Ax stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3		0
+#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
+
+#define USB2_PLL_REFDIV_SHIFT_MMP3		8
+#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
+
+#define USB2_PLL_VDD12_SHIFT_MMP3		12
+#define USB2_PLL_VDD18_SHIFT_MMP3		14
+
+/* This is for B0 stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
+#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
+#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
+#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
+#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
+
+#define USB2_PLL_CAL12_SHIFT_MMP3		0
+#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
+
+#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
+
+#define USB2_PLL_KVCO_SHIFT_MMP3		4
+#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
+
+#define USB2_PLL_ICP_SHIFT_MMP3			8
+#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
+
+#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
+
+#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
+#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
+
+#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
+
+/* USB2_TX_REG0 */
+#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
+#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
+
+#define USB2_TX_RCAL_START_SHIFT_MMP3		13
+
+/* USB2_TX_REG1 */
+#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
+#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
+
+#define USB2_TX_AMP_SHIFT_MMP3			4
+#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
+
+#define USB2_TX_VDD12_SHIFT_MMP3		8
+#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
+
+/* USB2_TX_REG2 */
+#define USB2_TX_DRV_SLEWRATE_SHIFT		10
+
+/* USB2_RX_REG0 */
+#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
+#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
+
+#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
+#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
+
+/* USB2_ANA_REG1*/
+#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
+
+/* USB2_OTG_REG0 */
+#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
+
+struct mmp3_usb_phy {
+	struct phy *phy;
+	void __iomem *base;
+};
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg |= value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static int mmp3_usb_phy_init(struct phy *phy)
+{
+	struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
+	void __iomem *base = mmp3_usb_phy->base;
+
+	if (cpu_is_mmp3_a0()) {
+		u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3
+			| USB2_PLL_REFDIV_MASK_MMP3));
+		u2o_set(base, USB2_PLL_REG0,
+			0xd << USB2_PLL_REFDIV_SHIFT_MMP3
+			| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3);
+	} else if (cpu_is_mmp3_b0()) {
+		u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0
+			| USB2_PLL_FBDIV_MASK_MMP3_B0);
+		u2o_set(base, USB2_PLL_REG0,
+			0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0
+			| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0);
+	} else {
+		dev_err(&phy->dev, "unsupported silicon revision\n");
+		return -ENODEV;
+	}
+
+	u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK
+		| USB2_PLL_ICP_MASK_MMP3
+		| USB2_PLL_KVCO_MASK_MMP3
+		| USB2_PLL_CALI12_MASK_MMP3);
+	u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3
+		| 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3
+		| 3 << USB2_PLL_ICP_SHIFT_MMP3
+		| 3 << USB2_PLL_KVCO_SHIFT_MMP3
+		| 3 << USB2_PLL_CAL12_SHIFT_MMP3);
+
+	u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3);
+	u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3);
+
+	u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3
+		| USB2_TX_AMP_MASK_MMP3
+		| USB2_TX_CK60_PHSEL_MASK_MMP3);
+	u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3
+		| 4 << USB2_TX_AMP_SHIFT_MMP3
+		| 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3);
+
+	u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT);
+	u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT);
+
+	u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3);
+	u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3);
+
+	u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3);
+
+	u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3);
+
+	return 0;
+}
+
+static int mmp3_usb_phy_calibrate(struct phy *phy)
+{
+	struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
+	void __iomem *base = mmp3_usb_phy->base;
+	int loops;
+
+	/*
+	 * PLL VCO and TX Impedance Calibration Timing:
+	 *
+	 *                _____________________________________
+	 * PU  __________|
+	 *                        _____________________________
+	 * VCOCAL START _________|
+	 *                                 ___
+	 * REG_RCAL_START ________________|   |________|_______
+	 *               | 200us | 400us  | 40| 400us  | USB PHY READY
+	 */
+
+	udelay(200);
+	u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3);
+	udelay(400);
+	u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
+	udelay(40);
+	u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
+	udelay(400);
+
+	loops = 0;
+	while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) {
+		mdelay(1);
+		loops++;
+		if (loops > 100) {
+			dev_err(&phy->dev, "PLL_READY not set after 100mS.\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static const struct phy_ops mmp3_usb_phy_ops = {
+	.init		= mmp3_usb_phy_init,
+	.calibrate	= mmp3_usb_phy_calibrate,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id mmp3_usb_phy_of_match[] = {
+	{ .compatible = "marvell,mmp3-usb-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
+
+static int mmp3_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *resource;
+	struct mmp3_usb_phy *mmp3_usb_phy;
+	struct phy_provider *provider;
+
+	mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL);
+	if (!mmp3_usb_phy)
+		return -ENOMEM;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mmp3_usb_phy->base = devm_ioremap_resource(dev, resource);
+	if (IS_ERR(mmp3_usb_phy->base)) {
+		dev_err(dev, "failed to remap PHY regs\n");
+		return PTR_ERR(mmp3_usb_phy->base);
+	}
+
+	mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops);
+	if (IS_ERR(mmp3_usb_phy->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(mmp3_usb_phy->phy);
+	}
+
+	phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy);
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	return 0;
+}
+
+static struct platform_driver mmp3_usb_phy_driver = {
+	.probe		= mmp3_usb_phy_probe,
+	.driver		= {
+		.name	= "mmp3-usb-phy",
+		.of_match_table = mmp3_usb_phy_of_match,
+	},
+};
+module_platform_driver(mmp3_usb_phy_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver");
+MODULE_LICENSE("GPL v2");