| Message ID | 20190902054935.4899-3-linux.amoon@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Odroid c2 usb fixs rebase on linux-next | expand |
On Mon, Sep 2, 2019 at 7:50 AM Anand Moon <linux.amoon@gmail.com> wrote: > > Add missing linking regulator node to usb bus for power usb devices. > > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Cc: Jerome Brunet <jbrunet@baylibre.com> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > --- > Re-base on linux-next > Added Ack from Martin. > > Changes from previous patch > [1] https://lore.kernel.org/patchwork/patch/1031243/ > split the changes and add the comments to power source > --- > arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > index 0cb5831d9daf..d4c8b896dd26 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > @@ -36,8 +36,15 @@ > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > > + /* > + * signal name from schematics: PWREN > + */ > gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; > enable-active-high; > + /* > + * signal name from sehematics: USB_POWER nit-pick: should be "schematics" I hope that Kevin can fix that up when applying
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 0cb5831d9daf..d4c8b896dd26 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -36,8 +36,15 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from sehematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds {