Message ID | 20190902085821.1263-2-linux.amoon@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Odroid c2 missing regulator linking | expand |
Hi Anand, On Mon, Sep 2, 2019 at 10:58 AM Anand Moon <linux.amoon@gmail.com> wrote: > > As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC: > fixed regulator output which is supplied by P5V0. > > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Cc: Jerome Brunet <jbrunet@baylibre.com> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Signed-off-by: Anand Moon <linux.amoon@gmail.com> one comment below, but overall this looks good: Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [...] > + vddc_ddr: regulator-vddc-ddr { > + compatible = "regulator-fixed"; > + regulator-name = "DDR3_1V5"; I prefer if the node name matches the regulator name, so in this case I would write above: ddr3_1v5: regulator-ddr-1v5 { Martin
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 3e51f0835c8d..b763b76820ba 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -111,6 +111,36 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U17 RT9179GB */ + vin-supply = <&p5v0>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + /* U11 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + + vddc_ddr: regulator-vddc-ddr { + compatible = "regulator-fixed"; + regulator-name = "DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + /* U15 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC: fixed regulator output which is supplied by P5V0. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> --- Changes from previous. - drop the rename and linking vcc3v3 regulator node. - fix the typo spelling. --- .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+)