diff mbox series

[v2,7/7] arm64: tegra: enable SMMU for SDHCI and EQOS on T194

Message ID 1567481528-31163-8-git-send-email-vdumpa@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Nvidia Arm SMMUv2 Implementation | expand

Commit Message

Krishna Reddy Sept. 3, 2019, 3:32 a.m. UTC 
Enable SMMU translations for SDHCI and EQOS transactions on T194.

Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 5ae3bbf..cac3462 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -51,6 +51,7 @@ 
 			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 			resets = <&bpmp TEGRA194_RESET_EQOS>;
 			reset-names = "eqos";
+			iommus = <&smmu TEGRA186_SID_EQOS>;
 			status = "disabled";
 
 			snps,write-requests = <1>;
@@ -381,6 +382,7 @@ 
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
 			reset-names = "sdhci";
+			iommus = <&smmu TEGRA186_SID_SDMMC1>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
 									<0x07>;
 			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -403,6 +405,7 @@ 
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
 			reset-names = "sdhci";
+			iommus = <&smmu TEGRA186_SID_SDMMC3>;
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -430,6 +433,7 @@ 
 					  <&bpmp TEGRA194_CLK_PLLC4>;
 			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
 			reset-names = "sdhci";
+			iommus = <&smmu TEGRA186_SID_SDMMC4>;
 			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;