[v2,14/21] iwlwifi: mvm: add support for single antenna diversity
diff mbox series

Message ID 20190905132220.23970-15-luca@coelho.fi
State New
Delegated to: Luca Coelho
Headers show
Series
  • iwlwifi: updates intended for v5.4 2019-09-03-2
Related show

Commit Message

Luca Coelho Sept. 5, 2019, 1:22 p.m. UTC
From: Haim Dreyfuss <haim.dreyfuss@intel.com>

There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenna diversity(SAD) feature. In the future, we will read
the active antenna from a BIOS configuration. Currently, we use a
default configuration which means that the FW decides which antenna to use.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/intel/iwlwifi/cfg/22000.c  | 1 +
 drivers/net/wireless/intel/iwlwifi/fw/file.h    | 4 ++++
 drivers/net/wireless/intel/iwlwifi/iwl-config.h | 2 ++
 3 files changed, 7 insertions(+)

Patch
diff mbox series

diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
index 4ef28d916fd3..3bd03ddbe22f 100644
--- a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
+++ b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
@@ -240,6 +240,7 @@  const struct iwl_cfg iwl_ax101_cfg_qu_hr = {
 	 * HT size; mac80211 would otherwise pick the HE max (256) by default.
 	 */
 	.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
+	.tx_with_siso_diversity = true,
 };
 
 const struct iwl_cfg iwl_ax201_cfg_qu_hr = {
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/file.h b/drivers/net/wireless/intel/iwlwifi/fw/file.h
index 00db39427be7..329b00e90fa4 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/file.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
@@ -524,6 +524,10 @@  enum iwl_fw_phy_cfg {
 	FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
 	FW_PHY_CFG_RX_CHAIN_POS = 20,
 	FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
+	FW_PHY_CFG_CHAIN_SAD_POS = 23,
+	FW_PHY_CFG_CHAIN_SAD_ENABLED = 0x1 << FW_PHY_CFG_CHAIN_SAD_POS,
+	FW_PHY_CFG_CHAIN_SAD_ANT_A = 0x2 << FW_PHY_CFG_CHAIN_SAD_POS,
+	FW_PHY_CFG_CHAIN_SAD_ANT_B = 0x4 << FW_PHY_CFG_CHAIN_SAD_POS,
 	FW_PHY_CFG_SHARED_CLK = BIT(31),
 };
 
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
index 02b65e2580a3..47bd35618573 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
@@ -379,6 +379,7 @@  struct iwl_cfg_trans_params {
  * @ht_params: point to ht parameters
  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @tx_with_siso_diversity: 1x1 device with tx antenna diversity
  * @internal_wimax_coex: internal wifi/wimax combo device
  * @high_temp: Is this NIC is designated to be in high temperature.
  * @host_interrupt_operation_mode: device needs host interrupt operation
@@ -441,6 +442,7 @@  struct iwl_cfg {
 	u16 nvm_ver;
 	u16 nvm_calib_ver;
 	u32 rx_with_siso_diversity:1,
+	    tx_with_siso_diversity:1,
 	    bt_shared_single_ant:1,
 	    internal_wimax_coex:1,
 	    host_interrupt_operation_mode:1,