| Message ID | 20190907092728.23897-3-dongchun.zhu@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: i2c: Add support for OV02A10 sensor | expand |
Hi Dongchun, Thanks for the update. A few more comments below. On Sat, Sep 07, 2019 at 05:27:28PM +0800, dongchun.zhu@mediatek.com wrote: > From: Dongchun Zhu <dongchun.zhu@mediatek.com> > > This patch adds a V4L2 sub-device driver for OV02A10 image sensor. > The OV02A10 is a 1/5" CMOS sensor from Omnivision, > supporting output format: 10-bit Raw. > > The OV02A10 has a single MIPI lane interface and use the I2C bus > for control and the CSI-2 bus for data. > > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com> > --- > MAINTAINERS | 1 + > drivers/media/i2c/Kconfig | 11 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/ov02a10.c | 1062 +++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 1075 insertions(+) > create mode 100644 drivers/media/i2c/ov02a10.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 41734fb..4b714a2 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11821,6 +11821,7 @@ M: Dongchun Zhu <dongchun.zhu@mediatek.com> > L: linux-media@vger.kernel.org > T: git git://linuxtv.org/media_tree.git > S: Maintained > +F: drivers/media/i2c/ov02a10.c > F: Documentation/devicetree/bindings/media/i2c/ov02a10.txt > > OMNIVISION OV2680 SENSOR DRIVER > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 79ce9ec..22e0db4 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -617,6 +617,17 @@ config VIDEO_IMX355 > To compile this driver as a module, choose M here: the > module will be called imx355. > > +config VIDEO_OV02A10 > + tristate "OmniVision OV02A10 sensor support" > + depends on VIDEO_V4L2 && I2C > + depends on MEDIA_CAMERA_SUPPORT Please add VIDEO_V4L2_SUBDEV_API > + help > + This is a Video4Linux2 sensor driver for the OmniVision > + OV02A10 camera. > + > + To compile this driver as a module, choose M here: the > + module will be called ov02a10. > + > config VIDEO_OV2640 > tristate "OmniVision OV2640 sensor support" > depends on VIDEO_V4L2 && I2C > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index fd4ea86..d27f4e2 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o > obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o > obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o > obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o > +obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o > obj-$(CONFIG_VIDEO_OV2640) += ov2640.o > obj-$(CONFIG_VIDEO_OV2680) += ov2680.o > obj-$(CONFIG_VIDEO_OV2685) += ov2685.o > diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c > new file mode 100644 > index 0000000..fb677d5 > --- /dev/null > +++ b/drivers/media/i2c/ov02a10.c > @@ -0,0 +1,1062 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2019 MediaTek Inc. > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/module.h> > +#include <linux/pm_runtime.h> > +#include <linux/regulator/consumer.h> > +#include <media/media-entity.h> > +#include <media/v4l2-async.h> > +#include <media/v4l2-ctrls.h> > +#include <media/v4l2-subdev.h> > +#include <media/v4l2-fwnode.h> > + > +#define CHIP_ID 0x2509 > +#define OV02A10_REG_CHIP_ID_H 0x02 > +#define OV02A10_REG_CHIP_ID_L 0x03 > +#define OV02A10_ID(_msb, _lsb) ((_msb) << 8 | (_lsb)) > + > +/* Bit[1] vertical upside down */ > +/* Bit[0] horizontal mirror */ > +#define REG_MIRROR_FLIP_CONTROL 0x3f > + > +/* Orientation */ > +#define REG_MIRROR_FLIP_ENABLE 0x03 > + > +#define REG_PAGE_SWITCH 0xfd > +#define REG_GLOBAL_EFFECTIVE 0x01 > +#define REG_ENABLE BIT(0) > +#define OV02A10_MASK_8_BITS 0xff > + > +#define REG_SC_CTRL_MODE 0xac > +#define SC_CTRL_MODE_STANDBY 0x00 > +#define SC_CTRL_MODE_STREAMING 0x01 > + > +#define OV02A10_EXP_SHIFT 8 > +#define OV02A10_REG_EXPOSURE_H 0x03 > +#define OV02A10_REG_EXPOSURE_L 0x04 > +#define OV02A10_EXPOSURE_MIN 4 > +#define OV02A10_EXPOSURE_MAX_MARGIN 4 > +#define OV02A10_EXPOSURE_STEP 1 > + > +#define OV02A10_VTS_SHIFT 8 > +#define OV02A10_REG_VTS_H 0x05 > +#define OV02A10_REG_VTS_L 0x06 > +#define OV02A10_VTS_MAX 0x209f > +#define OV02A10_VTS_MIN 0x04cf > +#define OV02A10_BASIC_LINE 1224 > + > +#define OV02A10_REG_GAIN 0x24 > +#define OV02A10_GAIN_MIN 0x10 > +#define OV02A10_GAIN_MAX 0xf8 > +#define OV02A10_GAIN_STEP 0x01 > +#define OV02A10_GAIN_DEFAULT 0x40 > + > +/* Test pattern control */ > +#define OV02A10_REG_TEST_PATTERN 0xb6 > +#define OV02A10_TEST_PATTERN_ENABLE BIT(0) > + > +#define OV02A10_LINK_FREQ_390MHZ 390000000ULL > +#define OV02A10_ECLK_FREQ 24000000 > +#define OV02A10_DATA_LANES 1 > +#define OV02A10_BITS_PER_SAMPLE 10 > + > +static const char * const ov02a10_supply_names[] = { > + "dovdd", /* Digital I/O power */ > + "avdd", /* Analog power */ > + "dvdd", /* Digital core power */ > +}; > + > +#define OV02A10_NUM_SUPPLIES ARRAY_SIZE(ov02a10_supply_names) > + > +struct ov02a10_reg { > + u8 addr; > + u8 val; > +}; > + > +struct ov02a10_reg_list { > + u32 num_of_regs; > + const struct ov02a10_reg *regs; > +}; > + > +struct ov02a10_mode { > + u32 width; > + u32 height; > + u32 exp_def; > + u32 hts_def; > + u32 vts_def; > + const struct ov02a10_reg_list reg_list; > +}; > + > +struct ov02a10 { > + struct clk *eclk; > + u32 eclk_freq; > + > + struct gpio_desc *pd_gpio; > + struct gpio_desc *n_rst_gpio; > + struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES]; > + > + bool streaming; > + bool upside_down; > + > + /* > + * Serialize control access, get/set format, get selection > + * and start streaming. > + */ > + struct mutex mutex; > + struct v4l2_subdev subdev; > + struct media_pad pad; > + struct v4l2_ctrl *anal_gain; > + struct v4l2_ctrl *exposure; > + struct v4l2_ctrl *hblank; > + struct v4l2_ctrl *vblank; > + struct v4l2_ctrl *hflip; > + struct v4l2_ctrl *vflip; > + struct v4l2_ctrl *test_pattern; Of the above references to controls, only exposure appears to be actually used. Please drop the others. > + struct v4l2_mbus_framefmt fmt; > + struct v4l2_ctrl_handler ctrl_handler; > + > + const struct ov02a10_mode *cur_mode; > +}; > + > +static inline struct ov02a10 *to_ov02a10(struct v4l2_subdev *sd) > +{ > + return container_of(sd, struct ov02a10, subdev); > +} > + > +/* > + * eclk 24Mhz > + * pclk 39Mhz > + * linelength 934(0x3a6) > + * framelength 1390(0x56E) > + * grabwindow_width 1600 > + * grabwindow_height 1200 > + * max_framerate 30fps > + * mipi_datarate per lane 780Mbps > + */ > +static const struct ov02a10_reg ov02a10_1600x1200_regs[] = { > + {0xfd, 0x01}, > + {0xac, 0x00}, > + {0xfd, 0x00}, > + {0x2f, 0x29}, > + {0x34, 0x00}, > + {0x35, 0x21}, > + {0x30, 0x15}, > + {0x33, 0x01}, > + {0xfd, 0x01}, > + {0x44, 0x00}, > + {0x2a, 0x4c}, > + {0x2b, 0x1e}, > + {0x2c, 0x60}, > + {0x25, 0x11}, > + {0x03, 0x01}, > + {0x04, 0xae}, > + {0x09, 0x00}, > + {0x0a, 0x02}, > + {0x06, 0xa6}, > + {0x31, 0x00}, > + {0x24, 0x40}, > + {0x01, 0x01}, > + {0xfb, 0x73}, > + {0xfd, 0x01}, > + {0x16, 0x04}, > + {0x1c, 0x09}, > + {0x21, 0x42}, > + {0x12, 0x04}, > + {0x13, 0x10}, > + {0x11, 0x40}, > + {0x33, 0x81}, > + {0xd0, 0x00}, > + {0xd1, 0x01}, > + {0xd2, 0x00}, > + {0x50, 0x10}, > + {0x51, 0x23}, > + {0x52, 0x20}, > + {0x53, 0x10}, > + {0x54, 0x02}, > + {0x55, 0x20}, > + {0x56, 0x02}, > + {0x58, 0x48}, > + {0x5d, 0x15}, > + {0x5e, 0x05}, > + {0x66, 0x66}, > + {0x68, 0x68}, > + {0x6b, 0x00}, > + {0x6c, 0x00}, > + {0x6f, 0x40}, > + {0x70, 0x40}, > + {0x71, 0x0a}, > + {0x72, 0xf0}, > + {0x73, 0x10}, > + {0x75, 0x80}, > + {0x76, 0x10}, > + {0x84, 0x00}, > + {0x85, 0x10}, > + {0x86, 0x10}, > + {0x87, 0x00}, > + {0x8a, 0x22}, > + {0x8b, 0x22}, > + {0x19, 0xf1}, > + {0x29, 0x01}, > + {0xfd, 0x01}, > + {0x9d, 0xd6}, > + {0xa0, 0x29}, > + {0xa1, 0x03}, > + {0xad, 0x62}, > + {0xae, 0x00}, > + {0xaf, 0x85}, > + {0xb1, 0x01}, > + {0x8e, 0x06}, > + {0x8f, 0x40}, > + {0x90, 0x04}, > + {0x91, 0xb0}, > + {0x45, 0x01}, > + {0x46, 0x00}, > + {0x47, 0x6c}, > + {0x48, 0x03}, > + {0x49, 0x8b}, > + {0x4a, 0x00}, > + {0x4b, 0x07}, > + {0x4c, 0x04}, > + {0x4d, 0xb7}, > + {0xf0, 0x40}, > + {0xf1, 0x40}, > + {0xf2, 0x40}, > + {0xf3, 0x40}, > + {0x3f, 0x00}, > + {0xfd, 0x01}, > + {0x05, 0x00}, > + {0x06, 0xa6}, > + {0xfd, 0x01}, > +}; > + > +static const char * const ov02a10_test_pattern_menu[] = { > + "Disabled", > + "Color Bar", > +}; > + > +static const s64 link_freq_menu_items[] = { > + OV02A10_LINK_FREQ_390MHZ > +}; > + > +static u64 to_pixel_rate(u32 f_index) > +{ > + u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV02A10_DATA_LANES; > + > + do_div(pixel_rate, OV02A10_BITS_PER_SAMPLE); > + > + return pixel_rate; > +} > + > +static const struct ov02a10_mode supported_modes[] = { > + { > + .width = 1600, > + .height = 1200, > + .exp_def = 0x01ae, > + .hts_def = 0x03a6, > + .vts_def = 0x056e, > + .reg_list = { > + .num_of_regs = ARRAY_SIZE(ov02a10_1600x1200_regs), > + .regs = ov02a10_1600x1200_regs, > + }, > + }, > +}; > + > +static int ov02a10_write_array(struct ov02a10 *ov02a10, > + const struct ov02a10_reg_list *r_list) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + unsigned int i; > + int ret; > + > + for (i = 0; i < r_list->num_of_regs; i++) { > + ret = i2c_smbus_write_byte_data(client, > + r_list->regs[i].addr, > + r_list->regs[i].val); > + if (ret < 0) > + return ret; > + } > + > + return 0; > +} > + > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg, > + unsigned char *val) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + int ret; > + > + ret = i2c_smbus_read_byte_data(client, reg); > + if (ret >= 0) { > + *val = (unsigned char)ret; > + ret = 0; > + } > + > + return ret; > +} > + > +static void ov02a10_fill_fmt(const struct ov02a10_mode *mode, > + struct v4l2_mbus_framefmt *fmt) > +{ > + fmt->width = mode->width; > + fmt->height = mode->height; > + fmt->field = V4L2_FIELD_NONE; > +} > + > +static int ov02a10_set_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > + > + mutex_lock(&ov02a10->mutex); > + > + if (ov02a10->streaming) { > + mutex_unlock(&ov02a10->mutex); > + return -EBUSY; > + } > + > + /* Only one sensor mode supported */ > + mbus_fmt->code = ov02a10->fmt.code; > + ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); > + ov02a10->fmt = fmt->format; > + > + mutex_unlock(&ov02a10->mutex); > + > + return 0; > +} > + > +static int ov02a10_get_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > + > + mutex_lock(&ov02a10->mutex); > + > + fmt->format = ov02a10->fmt; > + mbus_fmt->code = ov02a10->fmt.code; > + ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); > + > + mutex_unlock(&ov02a10->mutex); > + > + return 0; > +} > + > +static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + > + if (code->index >= ARRAY_SIZE(supported_modes)) > + return -EINVAL; > + > + code->code = ov02a10->fmt.code; > + > + return 0; > +} > + > +static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_frame_size_enum *fse) > +{ > + if (fse->index >= ARRAY_SIZE(supported_modes)) > + return -EINVAL; > + > + fse->min_width = supported_modes[fse->index].width; > + fse->max_width = supported_modes[fse->index].width; > + fse->max_height = supported_modes[fse->index].height; > + fse->min_height = supported_modes[fse->index].height; > + > + return 0; > +} > + > +static int __ov02a10_power_on(struct ov02a10 *ov02a10) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + struct device *dev = &client->dev; > + int ret; > + > + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, GPIOD_OUT_LOW); > + gpiod_set_value_cansleep(ov02a10->pd_gpio, GPIOD_OUT_HIGH); > + > + ret = clk_prepare_enable(ov02a10->eclk); > + if (ret < 0) { > + dev_err(dev, "failed to enable eclk\n"); > + return ret; > + } > + > + ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); > + if (ret < 0) { > + dev_err(dev, "failed to enable regulators\n"); > + goto disable_clk; > + } > + usleep_range(5000, 6000); > + > + gpiod_set_value_cansleep(ov02a10->pd_gpio, GPIOD_OUT_LOW); > + usleep_range(5000, 6000); > + > + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, GPIOD_OUT_HIGH); > + usleep_range(5000, 6000); > + > + return 0; > + > +disable_clk: > + clk_disable_unprepare(ov02a10->eclk); > + > + return ret; > +} > + > +static void __ov02a10_power_off(struct ov02a10 *ov02a10) > +{ > + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1); > + clk_disable_unprepare(ov02a10->eclk); > + gpiod_set_value_cansleep(ov02a10->pd_gpio, 1); > + regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); > +} > + > +static int __ov02a10_start_stream(struct ov02a10 *ov02a10) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + const struct ov02a10_reg_list *reg_list; > + int ret; > + > + /* Apply default values of current mode */ > + reg_list = &ov02a10->cur_mode->reg_list; > + ret = ov02a10_write_array(ov02a10, reg_list); > + if (ret) > + return ret; > + > + /* Apply customized values from user */ > + ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler); > + if (ret) > + return ret; > + > + /* Set orientation to 180 degree */ > + if (ov02a10->upside_down) { > + ret = i2c_smbus_write_byte_data(client, REG_MIRROR_FLIP_CONTROL, > + REG_MIRROR_FLIP_ENABLE); > + if (ret) { > + dev_err(&client->dev, "failed to set orientation\n"); > + return ret; > + } > + ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > + REG_ENABLE); > + if (ret < 0) > + return ret; > + } > + > + /* Set stream on register */ > + return i2c_smbus_write_byte_data(client, > + REG_SC_CTRL_MODE, SC_CTRL_MODE_STREAMING); > +} > + > +static int __ov02a10_stop_stream(struct ov02a10 *ov02a10) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + > + return i2c_smbus_write_byte_data(client, > + REG_SC_CTRL_MODE, SC_CTRL_MODE_STANDBY); Indentation. > +} > + > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg) > +{ > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + struct v4l2_subdev_format fmt = { 0 }; > + > + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > + fmt.format.width = ov02a10->cur_mode->width; > + fmt.format.height = ov02a10->cur_mode->width; > + > + ov02a10_set_fmt(sd, cfg, &fmt); > + > + return 0; > +} > + > +static int ov02a10_s_stream(struct v4l2_subdev *sd, int on) > +{ > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + int ret = 0; > + > + dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on); > + mutex_lock(&ov02a10->mutex); > + > + if (ov02a10->streaming == on) > + goto unlock_and_return; > + > + if (on) { > + ret = pm_runtime_get_sync(&client->dev); > + if (ret < 0) { > + pm_runtime_put_noidle(&client->dev); > + goto unlock_and_return; > + } > + > + ret = __ov02a10_start_stream(ov02a10); > + if (ret) { > + __ov02a10_stop_stream(ov02a10); > + ov02a10->streaming = !on; > + goto err_rpm_put; > + } > + } else { > + __ov02a10_stop_stream(ov02a10); > + pm_runtime_put(&client->dev); > + } > + > + ov02a10->streaming = on; > + mutex_unlock(&ov02a10->mutex); > + > + return ret; > + > +err_rpm_put: > + pm_runtime_put(&client->dev); > +unlock_and_return: > + mutex_unlock(&ov02a10->mutex); > + > + return ret; > +} > + > +static int __maybe_unused ov02a10_runtime_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + > + return __ov02a10_power_on(ov02a10); > +} > + > +static int __maybe_unused ov02a10_runtime_suspend(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + > + __ov02a10_power_off(ov02a10); > + > + return 0; > +} Please move the content of the both functions here; you don't need another pair with just different arguments. > + > +static const struct dev_pm_ops ov02a10_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > + SET_RUNTIME_PM_OPS(ov02a10_runtime_suspend, > + ov02a10_runtime_resume, NULL) > +}; > + > +/* > + * ov02a10_set_exposure - Function called when setting exposure time > + * @priv: Pointer to device structure > + * @val: Variable for exposure time, in the unit of micro-second > + * > + * Set exposure time based on input value. > + * > + * Return: 0 on success > + */ > +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + int ret; > + > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H, > + ((val >> OV02A10_EXP_SHIFT) & > + OV02A10_MASK_8_BITS)); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, > + (val & OV02A10_MASK_8_BITS)); > + if (ret < 0) > + return ret; > + > + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > + REG_ENABLE); > +} > + > +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + int ret; > + > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, > + (val & OV02A10_MASK_8_BITS)); > + if (ret < 0) > + return ret; > + > + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > + REG_ENABLE); > +} > + > +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + int ret; > + > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H, > + (((val + ov02a10->cur_mode->height - > + OV02A10_BASIC_LINE) >> > + OV02A10_VTS_SHIFT) & > + OV02A10_MASK_8_BITS)); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, > + ((val + ov02a10->cur_mode->height - > + OV02A10_BASIC_LINE) & > + OV02A10_MASK_8_BITS)); > + if (ret < 0) > + return ret; > + > + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > + REG_ENABLE); > +} > + > +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + int ret; > + > + if (pattern) > + pattern = OV02A10_TEST_PATTERN_ENABLE; > + > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_TEST_PATTERN, > + pattern); > + if (ret < 0) > + return ret; > + > + ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > + REG_ENABLE); > + if (ret < 0) > + return ret; > + > + return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE, > + SC_CTRL_MODE_STREAMING); > +} > + > +static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct ov02a10 *ov02a10 = container_of(ctrl->handler, > + struct ov02a10, ctrl_handler); > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + s64 max_expo; > + int ret; > + > + /* Propagate change of current control to all related controls */ > + if (ctrl->id == V4L2_CID_VBLANK) { > + /* Update max exposure while meeting expected vblanking */ > + max_expo = ov02a10->cur_mode->height + ctrl->val - > + OV02A10_EXPOSURE_MAX_MARGIN; > + __v4l2_ctrl_modify_range(ov02a10->exposure, > + ov02a10->exposure->minimum, max_expo, > + ov02a10->exposure->step, > + ov02a10->exposure->default_value); > + } > + > + /* V4L2 controls values will be applied only when power is already up */ > + if (!pm_runtime_get_if_in_use(&client->dev)) > + return 0; > + > + switch (ctrl->id) { > + case V4L2_CID_EXPOSURE: > + ret = ov02a10_set_exposure(ov02a10, ctrl->val); > + break; > + case V4L2_CID_ANALOGUE_GAIN: > + ret = ov02a10_set_gain(ov02a10, ctrl->val); > + break; > + case V4L2_CID_VBLANK: > + ret = ov02a10_set_vblank(ov02a10, ctrl->val); > + break; > + case V4L2_CID_TEST_PATTERN: > + ret = ov02a10_set_test_pattern(ov02a10, ctrl->val); > + break; > + }; > + > + pm_runtime_put(&client->dev); > + > + return ret; > +} > + > +static const struct v4l2_subdev_video_ops ov02a10_video_ops = { > + .s_stream = ov02a10_s_stream, > +}; > + > +static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = { > + .init_cfg = ov02a10_entity_init_cfg, > + .enum_mbus_code = ov02a10_enum_mbus_code, > + .enum_frame_size = ov02a10_enum_frame_sizes, > + .get_fmt = ov02a10_get_fmt, > + .set_fmt = ov02a10_set_fmt, > +}; > + > +static const struct v4l2_subdev_ops ov02a10_subdev_ops = { > + .video = &ov02a10_video_ops, > + .pad = &ov02a10_pad_ops, > +}; > + > +static const struct media_entity_operations ov02a10_subdev_entity_ops = { > + .link_validate = v4l2_subdev_link_validate, > +}; > + > +static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = { > + .s_ctrl = ov02a10_set_ctrl, > +}; > + > +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + const struct ov02a10_mode *mode; > + struct v4l2_ctrl_handler *handler; > + struct v4l2_ctrl *ctrl; > + u64 exposure_max; > + u32 pixel_rate, h_blank; > + int ret; > + > + handler = &ov02a10->ctrl_handler; > + mode = ov02a10->cur_mode; > + ret = v4l2_ctrl_handler_init(handler, 7); > + if (ret) > + return ret; > + > + handler->lock = &ov02a10->mutex; > + > + ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, > + 0, 0, link_freq_menu_items); > + if (ctrl) > + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; > + > + pixel_rate = to_pixel_rate(0); > + v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, > + 0, pixel_rate, 1, pixel_rate); > + > + h_blank = mode->hts_def - mode->width; > + ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK, > + h_blank, h_blank, 1, h_blank); > + if (ov02a10->hblank) > + ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; > + > + ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > + V4L2_CID_VBLANK, mode->vts_def - > + mode->height, > + OV02A10_VTS_MAX - mode->height, 1, > + mode->vts_def - mode->height); > + > + exposure_max = mode->vts_def - 4; > + ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > + V4L2_CID_EXPOSURE, > + OV02A10_EXPOSURE_MIN, > + exposure_max, > + OV02A10_EXPOSURE_STEP, > + mode->exp_def); > + > + ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > + V4L2_CID_ANALOGUE_GAIN, > + OV02A10_GAIN_MIN, > + OV02A10_GAIN_MAX, > + OV02A10_GAIN_STEP, > + OV02A10_GAIN_DEFAULT); > + > + ov02a10->test_pattern = > + v4l2_ctrl_new_std_menu_items(handler, > + &ov02a10_ctrl_ops, > + V4L2_CID_TEST_PATTERN, > + ARRAY_SIZE(ov02a10_test_pattern_menu) - > + 1, 0, 0, > + ov02a10_test_pattern_menu); > + > + if (handler->error) { > + ret = handler->error; > + dev_err(&client->dev, "failed to init controls(%d)\n", ret); > + goto err_free_handler; > + } > + > + ov02a10->subdev.ctrl_handler = handler; > + > + return 0; > + > +err_free_handler: > + v4l2_ctrl_handler_free(handler); > + > + return ret; > +} > + > +static int ov02a10_check_hwcfg(struct device *dev) > +{ > + struct fwnode_handle *ep; > + struct fwnode_handle *fwnode = dev_fwnode(dev); > + struct v4l2_fwnode_endpoint bus_cfg = { > + .bus_type = V4L2_MBUS_CSI2_DPHY > + }; > + unsigned int i, j; > + int ret; > + > + if (!fwnode) > + return -ENXIO; > + > + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); > + if (!ep) > + return -ENXIO; > + > + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); > + fwnode_handle_put(ep); > + if (ret) > + return ret; > + > + if (!bus_cfg.nr_of_link_frequencies) { > + dev_err(dev, "no link frequencies defined"); > + ret = -EINVAL; > + goto check_hwcfg_error; > + } > + > + for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) { > + for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) { > + if (link_freq_menu_items[i] == > + bus_cfg.link_frequencies[j]) > + break; > + } > + > + if (j == bus_cfg.nr_of_link_frequencies) { > + dev_err(dev, "no link frequency %lld supported", > + link_freq_menu_items[i]); > + ret = -EINVAL; > + goto check_hwcfg_error; > + } > + } > + > +check_hwcfg_error: > + v4l2_fwnode_endpoint_free(&bus_cfg); > + > + return ret; > +} > + > +static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > + u16 id; > + u8 pid = 0; > + u8 ver = 0; > + int ret; > + > + /* Check sensor revision */ > + ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_H, &pid); > + if (ret) > + return ret; > + > + ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_L, &ver); > + if (ret) > + return ret; > + > + id = OV02A10_ID(pid, ver); > + if (id != CHIP_ID) { > + dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id); > + return ret; > + } > + > + dev_info(&client->dev, "Detected OV%04X sensor\n", id); > + > + return 0; > +} > + > +static int ov02a10_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct ov02a10 *ov02a10; > + unsigned int rotation; > + unsigned int i; > + int ret; > + > + dev_info(dev, "ov02a10 probe aaaa++\n"); Please remove. > + > + ret = ov02a10_check_hwcfg(dev); > + if (ret) { > + dev_err(dev, "failed to check HW configuration: %d", > + ret); > + return ret; > + } > + > + ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL); > + if (!ov02a10) > + return -ENOMEM; > + > + v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops); > + ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; > + > + /* Optional indication of physical rotation of sensor */ > + ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", > + &rotation); > + if (!ret) { > + switch (rotation) { > + case 180: > + ov02a10->upside_down = true; > + ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10; > + break; > + case 0: > + break; > + default: > + dev_warn(dev, "%u degrees rotation is not supported, ignoring...\n", > + rotation); > + } > + } > + > + /* Get system clock (eclk) */ > + ov02a10->eclk = devm_clk_get(dev, "eclk"); > + if (IS_ERR(ov02a10->eclk)) { > + dev_err(dev, "failed to get eclk\n"); > + return -EINVAL; > + } > + > + ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", > + &ov02a10->eclk_freq); > + if (ret) { > + dev_err(dev, "failed to get eclk frequency\n"); > + return ret; > + } > + > + ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq); > + if (ret) { > + dev_err(dev, "failed to set eclk frequency (24MHz)\n"); > + return ret; > + } > + > + if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) { > + dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n", > + ov02a10->eclk_freq, OV02A10_ECLK_FREQ); > + return -EINVAL; > + } > + > + ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH); > + if (IS_ERR(ov02a10->pd_gpio)) { > + dev_err(dev, "failed to get powerdown-gpios\n"); > + return -EINVAL; > + } > + > + ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ov02a10->n_rst_gpio)) { > + dev_err(dev, "failed to get reset-gpios\n"); > + return -EINVAL; > + } > + > + for (i = 0; i < OV02A10_NUM_SUPPLIES; i++) > + ov02a10->supplies[i].supply = ov02a10_supply_names[i]; > + > + ret = devm_regulator_bulk_get(dev, > + OV02A10_NUM_SUPPLIES, Fits on a single line. > + ov02a10->supplies); > + if (ret) { > + dev_err(dev, "failed to get regulators\n"); > + return ret; > + } > + > + mutex_init(&ov02a10->mutex); > + ov02a10->cur_mode = &supported_modes[0]; > + ret = ov02a10_initialize_controls(ov02a10); > + if (ret) { > + dev_err(dev, "failed to initialize controls\n"); > + goto err_destroy_mutex; > + } > + > + ret = __ov02a10_power_on(ov02a10); > + if (ret) > + goto err_free_handler; > + > + ret = ov02a10_check_sensor_id(ov02a10); > + if (ret) > + goto err_power_off; > + > + ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops; > + ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; > + ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE; > + ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad); > + if (ret < 0) { > + dev_err(dev, "failed to init entity pads: %d", ret); > + goto err_power_off; > + } > + > + ret = v4l2_async_register_subdev(&ov02a10->subdev); > + if (ret) { > + dev_err(dev, "failed to register V4L2 subdev: %d", > + ret); > + goto err_clean_entity; > + } > + > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > + pm_runtime_idle(dev); > + > + dev_info(dev, "ov02a10 probe --\n"); Ditto. > + return 0; > + > +err_clean_entity: > + media_entity_cleanup(&ov02a10->subdev.entity); > +err_power_off: > + __ov02a10_power_off(ov02a10); > +err_free_handler: > + v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler); > +err_destroy_mutex: > + mutex_destroy(&ov02a10->mutex); > + > + return ret; > +} > + > +static int ov02a10_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > + > + v4l2_async_unregister_subdev(sd); > + media_entity_cleanup(&sd->entity); > + v4l2_ctrl_handler_free(sd->ctrl_handler); > + pm_runtime_disable(&client->dev); > + if (!pm_runtime_status_suspended(&client->dev)) > + __ov02a10_power_off(ov02a10); > + pm_runtime_set_suspended(&client->dev); > + mutex_destroy(&ov02a10->mutex); > + > + return 0; > +} > + > +static const struct of_device_id ov02a10_of_match[] = { > + { .compatible = "ovti,ov02a10" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, ov02a10_of_match); > + > +static struct i2c_driver ov02a10_i2c_driver = { > + .driver = { > + .name = "ov02a10", > + .pm = &ov02a10_pm_ops, > + .of_match_table = ov02a10_of_match, > + }, > + .probe_new = &ov02a10_probe, > + .remove = &ov02a10_remove, > +}; > + > +module_i2c_driver(ov02a10_i2c_driver); > + > +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>"); > +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver"); > +MODULE_LICENSE("GPL v2"); > +
Hello Sakari, On Mon, 2019-09-09 at 09:55 +0300, Sakari Ailus wrote: > Hi Dongchun, > > Thanks for the update. A few more comments below. > > On Sat, Sep 07, 2019 at 05:27:28PM +0800, dongchun.zhu@mediatek.com wrote: > > From: Dongchun Zhu <dongchun.zhu@mediatek.com> > > > > This patch adds a V4L2 sub-device driver for OV02A10 image sensor. > > The OV02A10 is a 1/5" CMOS sensor from Omnivision, > > supporting output format: 10-bit Raw. > > > > The OV02A10 has a single MIPI lane interface and use the I2C bus > > for control and the CSI-2 bus for data. > > > > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com> > > --- > > MAINTAINERS | 1 + > > drivers/media/i2c/Kconfig | 11 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/ov02a10.c | 1062 +++++++++++++++++++++++++++++++++++++++++++ > > 4 files changed, 1075 insertions(+) > > create mode 100644 drivers/media/i2c/ov02a10.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 41734fb..4b714a2 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -11821,6 +11821,7 @@ M: Dongchun Zhu <dongchun.zhu@mediatek.com> > > L: linux-media@vger.kernel.org > > T: git git://linuxtv.org/media_tree.git > > S: Maintained > > +F: drivers/media/i2c/ov02a10.c > > F: Documentation/devicetree/bindings/media/i2c/ov02a10.txt > > > > OMNIVISION OV2680 SENSOR DRIVER > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index 79ce9ec..22e0db4 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -617,6 +617,17 @@ config VIDEO_IMX355 > > To compile this driver as a module, choose M here: the > > module will be called imx355. > > > > +config VIDEO_OV02A10 > > + tristate "OmniVision OV02A10 sensor support" > > + depends on VIDEO_V4L2 && I2C > > + depends on MEDIA_CAMERA_SUPPORT > > Please add VIDEO_V4L2_SUBDEV_API > Fixed in next release. > > + help > > + This is a Video4Linux2 sensor driver for the OmniVision > > + OV02A10 camera. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called ov02a10. > > + > > config VIDEO_OV2640 > > tristate "OmniVision OV2640 sensor support" > > depends on VIDEO_V4L2 && I2C > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index fd4ea86..d27f4e2 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o > > obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o > > obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o > > obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o > > +obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o > > obj-$(CONFIG_VIDEO_OV2640) += ov2640.o > > obj-$(CONFIG_VIDEO_OV2680) += ov2680.o > > obj-$(CONFIG_VIDEO_OV2685) += ov2685.o > > diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c > > new file mode 100644 > > index 0000000..fb677d5 > > --- /dev/null > > +++ b/drivers/media/i2c/ov02a10.c > > @@ -0,0 +1,1062 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +// Copyright (c) 2019 MediaTek Inc. > > + > > +#include <linux/clk.h> > > +#include <linux/device.h> > > +#include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/module.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/regulator/consumer.h> > > +#include <media/media-entity.h> > > +#include <media/v4l2-async.h> > > +#include <media/v4l2-ctrls.h> > > +#include <media/v4l2-subdev.h> > > +#include <media/v4l2-fwnode.h> > > + > > +#define CHIP_ID 0x2509 > > +#define OV02A10_REG_CHIP_ID_H 0x02 > > +#define OV02A10_REG_CHIP_ID_L 0x03 > > +#define OV02A10_ID(_msb, _lsb) ((_msb) << 8 | (_lsb)) > > + > > +/* Bit[1] vertical upside down */ > > +/* Bit[0] horizontal mirror */ > > +#define REG_MIRROR_FLIP_CONTROL 0x3f > > + > > +/* Orientation */ > > +#define REG_MIRROR_FLIP_ENABLE 0x03 > > + > > +#define REG_PAGE_SWITCH 0xfd > > +#define REG_GLOBAL_EFFECTIVE 0x01 > > +#define REG_ENABLE BIT(0) > > +#define OV02A10_MASK_8_BITS 0xff > > + > > +#define REG_SC_CTRL_MODE 0xac > > +#define SC_CTRL_MODE_STANDBY 0x00 > > +#define SC_CTRL_MODE_STREAMING 0x01 > > + > > +#define OV02A10_EXP_SHIFT 8 > > +#define OV02A10_REG_EXPOSURE_H 0x03 > > +#define OV02A10_REG_EXPOSURE_L 0x04 > > +#define OV02A10_EXPOSURE_MIN 4 > > +#define OV02A10_EXPOSURE_MAX_MARGIN 4 > > +#define OV02A10_EXPOSURE_STEP 1 > > + > > +#define OV02A10_VTS_SHIFT 8 > > +#define OV02A10_REG_VTS_H 0x05 > > +#define OV02A10_REG_VTS_L 0x06 > > +#define OV02A10_VTS_MAX 0x209f > > +#define OV02A10_VTS_MIN 0x04cf > > +#define OV02A10_BASIC_LINE 1224 > > + > > +#define OV02A10_REG_GAIN 0x24 > > +#define OV02A10_GAIN_MIN 0x10 > > +#define OV02A10_GAIN_MAX 0xf8 > > +#define OV02A10_GAIN_STEP 0x01 > > +#define OV02A10_GAIN_DEFAULT 0x40 > > + > > +/* Test pattern control */ > > +#define OV02A10_REG_TEST_PATTERN 0xb6 > > +#define OV02A10_TEST_PATTERN_ENABLE BIT(0) > > + > > +#define OV02A10_LINK_FREQ_390MHZ 390000000ULL > > +#define OV02A10_ECLK_FREQ 24000000 > > +#define OV02A10_DATA_LANES 1 > > +#define OV02A10_BITS_PER_SAMPLE 10 > > + > > +static const char * const ov02a10_supply_names[] = { > > + "dovdd", /* Digital I/O power */ > > + "avdd", /* Analog power */ > > + "dvdd", /* Digital core power */ > > +}; > > + > > +#define OV02A10_NUM_SUPPLIES ARRAY_SIZE(ov02a10_supply_names) > > + > > +struct ov02a10_reg { > > + u8 addr; > > + u8 val; > > +}; > > + > > +struct ov02a10_reg_list { > > + u32 num_of_regs; > > + const struct ov02a10_reg *regs; > > +}; > > + > > +struct ov02a10_mode { > > + u32 width; > > + u32 height; > > + u32 exp_def; > > + u32 hts_def; > > + u32 vts_def; > > + const struct ov02a10_reg_list reg_list; > > +}; > > + > > +struct ov02a10 { > > + struct clk *eclk; > > + u32 eclk_freq; > > + > > + struct gpio_desc *pd_gpio; > > + struct gpio_desc *n_rst_gpio; > > + struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES]; > > + > > + bool streaming; > > + bool upside_down; > > + > > + /* > > + * Serialize control access, get/set format, get selection > > + * and start streaming. > > + */ > > + struct mutex mutex; > > + struct v4l2_subdev subdev; > > + struct media_pad pad; > > + struct v4l2_ctrl *anal_gain; > > + struct v4l2_ctrl *exposure; > > + struct v4l2_ctrl *hblank; > > + struct v4l2_ctrl *vblank; > > + struct v4l2_ctrl *hflip; > > + struct v4l2_ctrl *vflip; > > + struct v4l2_ctrl *test_pattern; > > Of the above references to controls, only exposure appears to be actually > used. Please drop the others. > Thanks for reminder. We found that hblank, vblank, test_pattern are also used in ov02a10_initialize_controls. And hflip and vflip would be dropped in next release. > > + struct v4l2_mbus_framefmt fmt; > > + struct v4l2_ctrl_handler ctrl_handler; > > + > > + const struct ov02a10_mode *cur_mode; > > +}; > > + > > +static inline struct ov02a10 *to_ov02a10(struct v4l2_subdev *sd) > > +{ > > + return container_of(sd, struct ov02a10, subdev); > > +} > > + > > +/* > > + * eclk 24Mhz > > + * pclk 39Mhz > > + * linelength 934(0x3a6) > > + * framelength 1390(0x56E) > > + * grabwindow_width 1600 > > + * grabwindow_height 1200 > > + * max_framerate 30fps > > + * mipi_datarate per lane 780Mbps > > + */ > > +static const struct ov02a10_reg ov02a10_1600x1200_regs[] = { > > + {0xfd, 0x01}, > > + {0xac, 0x00}, > > + {0xfd, 0x00}, > > + {0x2f, 0x29}, > > + {0x34, 0x00}, > > + {0x35, 0x21}, > > + {0x30, 0x15}, > > + {0x33, 0x01}, > > + {0xfd, 0x01}, > > + {0x44, 0x00}, > > + {0x2a, 0x4c}, > > + {0x2b, 0x1e}, > > + {0x2c, 0x60}, > > + {0x25, 0x11}, > > + {0x03, 0x01}, > > + {0x04, 0xae}, > > + {0x09, 0x00}, > > + {0x0a, 0x02}, > > + {0x06, 0xa6}, > > + {0x31, 0x00}, > > + {0x24, 0x40}, > > + {0x01, 0x01}, > > + {0xfb, 0x73}, > > + {0xfd, 0x01}, > > + {0x16, 0x04}, > > + {0x1c, 0x09}, > > + {0x21, 0x42}, > > + {0x12, 0x04}, > > + {0x13, 0x10}, > > + {0x11, 0x40}, > > + {0x33, 0x81}, > > + {0xd0, 0x00}, > > + {0xd1, 0x01}, > > + {0xd2, 0x00}, > > + {0x50, 0x10}, > > + {0x51, 0x23}, > > + {0x52, 0x20}, > > + {0x53, 0x10}, > > + {0x54, 0x02}, > > + {0x55, 0x20}, > > + {0x56, 0x02}, > > + {0x58, 0x48}, > > + {0x5d, 0x15}, > > + {0x5e, 0x05}, > > + {0x66, 0x66}, > > + {0x68, 0x68}, > > + {0x6b, 0x00}, > > + {0x6c, 0x00}, > > + {0x6f, 0x40}, > > + {0x70, 0x40}, > > + {0x71, 0x0a}, > > + {0x72, 0xf0}, > > + {0x73, 0x10}, > > + {0x75, 0x80}, > > + {0x76, 0x10}, > > + {0x84, 0x00}, > > + {0x85, 0x10}, > > + {0x86, 0x10}, > > + {0x87, 0x00}, > > + {0x8a, 0x22}, > > + {0x8b, 0x22}, > > + {0x19, 0xf1}, > > + {0x29, 0x01}, > > + {0xfd, 0x01}, > > + {0x9d, 0xd6}, > > + {0xa0, 0x29}, > > + {0xa1, 0x03}, > > + {0xad, 0x62}, > > + {0xae, 0x00}, > > + {0xaf, 0x85}, > > + {0xb1, 0x01}, > > + {0x8e, 0x06}, > > + {0x8f, 0x40}, > > + {0x90, 0x04}, > > + {0x91, 0xb0}, > > + {0x45, 0x01}, > > + {0x46, 0x00}, > > + {0x47, 0x6c}, > > + {0x48, 0x03}, > > + {0x49, 0x8b}, > > + {0x4a, 0x00}, > > + {0x4b, 0x07}, > > + {0x4c, 0x04}, > > + {0x4d, 0xb7}, > > + {0xf0, 0x40}, > > + {0xf1, 0x40}, > > + {0xf2, 0x40}, > > + {0xf3, 0x40}, > > + {0x3f, 0x00}, > > + {0xfd, 0x01}, > > + {0x05, 0x00}, > > + {0x06, 0xa6}, > > + {0xfd, 0x01}, > > +}; > > + > > +static const char * const ov02a10_test_pattern_menu[] = { > > + "Disabled", > > + "Color Bar", > > +}; > > + > > +static const s64 link_freq_menu_items[] = { > > + OV02A10_LINK_FREQ_390MHZ > > +}; > > + > > +static u64 to_pixel_rate(u32 f_index) > > +{ > > + u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV02A10_DATA_LANES; > > + > > + do_div(pixel_rate, OV02A10_BITS_PER_SAMPLE); > > + > > + return pixel_rate; > > +} > > + > > +static const struct ov02a10_mode supported_modes[] = { > > + { > > + .width = 1600, > > + .height = 1200, > > + .exp_def = 0x01ae, > > + .hts_def = 0x03a6, > > + .vts_def = 0x056e, > > + .reg_list = { > > + .num_of_regs = ARRAY_SIZE(ov02a10_1600x1200_regs), > > + .regs = ov02a10_1600x1200_regs, > > + }, > > + }, > > +}; > > + > > +static int ov02a10_write_array(struct ov02a10 *ov02a10, > > + const struct ov02a10_reg_list *r_list) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + unsigned int i; > > + int ret; > > + > > + for (i = 0; i < r_list->num_of_regs; i++) { > > + ret = i2c_smbus_write_byte_data(client, > > + r_list->regs[i].addr, > > + r_list->regs[i].val); > > + if (ret < 0) > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg, > > + unsigned char *val) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + int ret; > > + > > + ret = i2c_smbus_read_byte_data(client, reg); > > + if (ret >= 0) { > > + *val = (unsigned char)ret; > > + ret = 0; > > + } > > + > > + return ret; > > +} > > + > > +static void ov02a10_fill_fmt(const struct ov02a10_mode *mode, > > + struct v4l2_mbus_framefmt *fmt) > > +{ > > + fmt->width = mode->width; > > + fmt->height = mode->height; > > + fmt->field = V4L2_FIELD_NONE; > > +} > > + > > +static int ov02a10_set_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > > + > > + mutex_lock(&ov02a10->mutex); > > + > > + if (ov02a10->streaming) { > > + mutex_unlock(&ov02a10->mutex); > > + return -EBUSY; > > + } > > + > > + /* Only one sensor mode supported */ > > + mbus_fmt->code = ov02a10->fmt.code; > > + ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); > > + ov02a10->fmt = fmt->format; > > + > > + mutex_unlock(&ov02a10->mutex); > > + > > + return 0; > > +} > > + > > +static int ov02a10_get_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > > + > > + mutex_lock(&ov02a10->mutex); > > + > > + fmt->format = ov02a10->fmt; > > + mbus_fmt->code = ov02a10->fmt.code; > > + ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); > > + > > + mutex_unlock(&ov02a10->mutex); > > + > > + return 0; > > +} > > + > > +static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > + if (code->index >= ARRAY_SIZE(supported_modes)) > > + return -EINVAL; > > + > > + code->code = ov02a10->fmt.code; > > + > > + return 0; > > +} > > + > > +static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_frame_size_enum *fse) > > +{ > > + if (fse->index >= ARRAY_SIZE(supported_modes)) > > + return -EINVAL; > > + > > + fse->min_width = supported_modes[fse->index].width; > > + fse->max_width = supported_modes[fse->index].width; > > + fse->max_height = supported_modes[fse->index].height; > > + fse->min_height = supported_modes[fse->index].height; > > + > > + return 0; > > +} > > + > > +static int __ov02a10_power_on(struct ov02a10 *ov02a10) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + struct device *dev = &client->dev; > > + int ret; > > + > > + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, GPIOD_OUT_LOW); > > + gpiod_set_value_cansleep(ov02a10->pd_gpio, GPIOD_OUT_HIGH); > > + > > + ret = clk_prepare_enable(ov02a10->eclk); > > + if (ret < 0) { > > + dev_err(dev, "failed to enable eclk\n"); > > + return ret; > > + } > > + > > + ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); > > + if (ret < 0) { > > + dev_err(dev, "failed to enable regulators\n"); > > + goto disable_clk; > > + } > > + usleep_range(5000, 6000); > > + > > + gpiod_set_value_cansleep(ov02a10->pd_gpio, GPIOD_OUT_LOW); > > + usleep_range(5000, 6000); > > + > > + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, GPIOD_OUT_HIGH); > > + usleep_range(5000, 6000); > > + > > + return 0; > > + > > +disable_clk: > > + clk_disable_unprepare(ov02a10->eclk); > > + > > + return ret; > > +} > > + > > +static void __ov02a10_power_off(struct ov02a10 *ov02a10) > > +{ > > + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1); > > + clk_disable_unprepare(ov02a10->eclk); > > + gpiod_set_value_cansleep(ov02a10->pd_gpio, 1); > > + regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); > > +} > > + > > +static int __ov02a10_start_stream(struct ov02a10 *ov02a10) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + const struct ov02a10_reg_list *reg_list; > > + int ret; > > + > > + /* Apply default values of current mode */ > > + reg_list = &ov02a10->cur_mode->reg_list; > > + ret = ov02a10_write_array(ov02a10, reg_list); > > + if (ret) > > + return ret; > > + > > + /* Apply customized values from user */ > > + ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler); > > + if (ret) > > + return ret; > > + > > + /* Set orientation to 180 degree */ > > + if (ov02a10->upside_down) { > > + ret = i2c_smbus_write_byte_data(client, REG_MIRROR_FLIP_CONTROL, > > + REG_MIRROR_FLIP_ENABLE); > > + if (ret) { > > + dev_err(&client->dev, "failed to set orientation\n"); > > + return ret; > > + } > > + ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > > + REG_ENABLE); > > + if (ret < 0) > > + return ret; > > + } > > + > > + /* Set stream on register */ > > + return i2c_smbus_write_byte_data(client, > > + REG_SC_CTRL_MODE, SC_CTRL_MODE_STREAMING); > > +} > > + > > +static int __ov02a10_stop_stream(struct ov02a10 *ov02a10) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + > > + return i2c_smbus_write_byte_data(client, > > + REG_SC_CTRL_MODE, SC_CTRL_MODE_STANDBY); > > Indentation. > Fixed in next release. > > +} > > + > > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg) > > +{ > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + struct v4l2_subdev_format fmt = { 0 }; > > + > > + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > > + fmt.format.width = ov02a10->cur_mode->width; > > + fmt.format.height = ov02a10->cur_mode->width; > > + > > + ov02a10_set_fmt(sd, cfg, &fmt); > > + > > + return 0; > > +} > > + > > +static int ov02a10_s_stream(struct v4l2_subdev *sd, int on) > > +{ > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + int ret = 0; > > + > > + dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on); > > + mutex_lock(&ov02a10->mutex); > > + > > + if (ov02a10->streaming == on) > > + goto unlock_and_return; > > + > > + if (on) { > > + ret = pm_runtime_get_sync(&client->dev); > > + if (ret < 0) { > > + pm_runtime_put_noidle(&client->dev); > > + goto unlock_and_return; > > + } > > + > > + ret = __ov02a10_start_stream(ov02a10); > > + if (ret) { > > + __ov02a10_stop_stream(ov02a10); > > + ov02a10->streaming = !on; > > + goto err_rpm_put; > > + } > > + } else { > > + __ov02a10_stop_stream(ov02a10); > > + pm_runtime_put(&client->dev); > > + } > > + > > + ov02a10->streaming = on; > > + mutex_unlock(&ov02a10->mutex); > > + > > + return ret; > > + > > +err_rpm_put: > > + pm_runtime_put(&client->dev); > > +unlock_and_return: > > + mutex_unlock(&ov02a10->mutex); > > + > > + return ret; > > +} > > + > > +static int __maybe_unused ov02a10_runtime_resume(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > + return __ov02a10_power_on(ov02a10); > > +} > > + > > +static int __maybe_unused ov02a10_runtime_suspend(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > + __ov02a10_power_off(ov02a10); > > + > > + return 0; > > +} > > Please move the content of the both functions here; you don't need another > pair with just different arguments. > Good idea. We would move the code of power on and off directly to the resume and suspend callbacks in next release. > > + > > +static const struct dev_pm_ops ov02a10_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > > + pm_runtime_force_resume) > > + SET_RUNTIME_PM_OPS(ov02a10_runtime_suspend, > > + ov02a10_runtime_resume, NULL) > > +}; > > + > > +/* > > + * ov02a10_set_exposure - Function called when setting exposure time > > + * @priv: Pointer to device structure > > + * @val: Variable for exposure time, in the unit of micro-second > > + * > > + * Set exposure time based on input value. > > + * > > + * Return: 0 on success > > + */ > > +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + int ret; > > + > > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H, > > + ((val >> OV02A10_EXP_SHIFT) & > > + OV02A10_MASK_8_BITS)); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, > > + (val & OV02A10_MASK_8_BITS)); > > + if (ret < 0) > > + return ret; > > + > > + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > > + REG_ENABLE); > > +} > > + > > +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + int ret; > > + > > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, > > + (val & OV02A10_MASK_8_BITS)); > > + if (ret < 0) > > + return ret; > > + > > + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > > + REG_ENABLE); > > +} > > + > > +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + int ret; > > + > > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H, > > + (((val + ov02a10->cur_mode->height - > > + OV02A10_BASIC_LINE) >> > > + OV02A10_VTS_SHIFT) & > > + OV02A10_MASK_8_BITS)); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, > > + ((val + ov02a10->cur_mode->height - > > + OV02A10_BASIC_LINE) & > > + OV02A10_MASK_8_BITS)); > > + if (ret < 0) > > + return ret; > > + > > + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > > + REG_ENABLE); > > +} > > + > > +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + int ret; > > + > > + if (pattern) > > + pattern = OV02A10_TEST_PATTERN_ENABLE; > > + > > + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_TEST_PATTERN, > > + pattern); > > + if (ret < 0) > > + return ret; > > + > > + ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, > > + REG_ENABLE); > > + if (ret < 0) > > + return ret; > > + > > + return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE, > > + SC_CTRL_MODE_STREAMING); > > +} > > + > > +static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct ov02a10 *ov02a10 = container_of(ctrl->handler, > > + struct ov02a10, ctrl_handler); > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + s64 max_expo; > > + int ret; > > + > > + /* Propagate change of current control to all related controls */ > > + if (ctrl->id == V4L2_CID_VBLANK) { > > + /* Update max exposure while meeting expected vblanking */ > > + max_expo = ov02a10->cur_mode->height + ctrl->val - > > + OV02A10_EXPOSURE_MAX_MARGIN; > > + __v4l2_ctrl_modify_range(ov02a10->exposure, > > + ov02a10->exposure->minimum, max_expo, > > + ov02a10->exposure->step, > > + ov02a10->exposure->default_value); > > + } > > + > > + /* V4L2 controls values will be applied only when power is already up */ > > + if (!pm_runtime_get_if_in_use(&client->dev)) > > + return 0; > > + > > + switch (ctrl->id) { > > + case V4L2_CID_EXPOSURE: > > + ret = ov02a10_set_exposure(ov02a10, ctrl->val); > > + break; > > + case V4L2_CID_ANALOGUE_GAIN: > > + ret = ov02a10_set_gain(ov02a10, ctrl->val); > > + break; > > + case V4L2_CID_VBLANK: > > + ret = ov02a10_set_vblank(ov02a10, ctrl->val); > > + break; > > + case V4L2_CID_TEST_PATTERN: > > + ret = ov02a10_set_test_pattern(ov02a10, ctrl->val); > > + break; > > + }; > > + > > + pm_runtime_put(&client->dev); > > + > > + return ret; > > +} > > + > > +static const struct v4l2_subdev_video_ops ov02a10_video_ops = { > > + .s_stream = ov02a10_s_stream, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = { > > + .init_cfg = ov02a10_entity_init_cfg, > > + .enum_mbus_code = ov02a10_enum_mbus_code, > > + .enum_frame_size = ov02a10_enum_frame_sizes, > > + .get_fmt = ov02a10_get_fmt, > > + .set_fmt = ov02a10_set_fmt, > > +}; > > + > > +static const struct v4l2_subdev_ops ov02a10_subdev_ops = { > > + .video = &ov02a10_video_ops, > > + .pad = &ov02a10_pad_ops, > > +}; > > + > > +static const struct media_entity_operations ov02a10_subdev_entity_ops = { > > + .link_validate = v4l2_subdev_link_validate, > > +}; > > + > > +static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = { > > + .s_ctrl = ov02a10_set_ctrl, > > +}; > > + > > +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + const struct ov02a10_mode *mode; > > + struct v4l2_ctrl_handler *handler; > > + struct v4l2_ctrl *ctrl; > > + u64 exposure_max; > > + u32 pixel_rate, h_blank; > > + int ret; > > + > > + handler = &ov02a10->ctrl_handler; > > + mode = ov02a10->cur_mode; > > + ret = v4l2_ctrl_handler_init(handler, 7); > > + if (ret) > > + return ret; > > + > > + handler->lock = &ov02a10->mutex; > > + > > + ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, > > + 0, 0, link_freq_menu_items); > > + if (ctrl) > > + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + pixel_rate = to_pixel_rate(0); > > + v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, > > + 0, pixel_rate, 1, pixel_rate); > > + > > + h_blank = mode->hts_def - mode->width; > > + ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK, > > + h_blank, h_blank, 1, h_blank); > > + if (ov02a10->hblank) > > + ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > > + V4L2_CID_VBLANK, mode->vts_def - > > + mode->height, > > + OV02A10_VTS_MAX - mode->height, 1, > > + mode->vts_def - mode->height); > > + > > + exposure_max = mode->vts_def - 4; > > + ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > > + V4L2_CID_EXPOSURE, > > + OV02A10_EXPOSURE_MIN, > > + exposure_max, > > + OV02A10_EXPOSURE_STEP, > > + mode->exp_def); > > + > > + ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > > + V4L2_CID_ANALOGUE_GAIN, > > + OV02A10_GAIN_MIN, > > + OV02A10_GAIN_MAX, > > + OV02A10_GAIN_STEP, > > + OV02A10_GAIN_DEFAULT); > > + > > + ov02a10->test_pattern = > > + v4l2_ctrl_new_std_menu_items(handler, > > + &ov02a10_ctrl_ops, > > + V4L2_CID_TEST_PATTERN, > > + ARRAY_SIZE(ov02a10_test_pattern_menu) - > > + 1, 0, 0, > > + ov02a10_test_pattern_menu); > > + > > + if (handler->error) { > > + ret = handler->error; > > + dev_err(&client->dev, "failed to init controls(%d)\n", ret); > > + goto err_free_handler; > > + } > > + > > + ov02a10->subdev.ctrl_handler = handler; > > + > > + return 0; > > + > > +err_free_handler: > > + v4l2_ctrl_handler_free(handler); > > + > > + return ret; > > +} > > + > > +static int ov02a10_check_hwcfg(struct device *dev) > > +{ > > + struct fwnode_handle *ep; > > + struct fwnode_handle *fwnode = dev_fwnode(dev); > > + struct v4l2_fwnode_endpoint bus_cfg = { > > + .bus_type = V4L2_MBUS_CSI2_DPHY > > + }; > > + unsigned int i, j; > > + int ret; > > + > > + if (!fwnode) > > + return -ENXIO; > > + > > + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); > > + if (!ep) > > + return -ENXIO; > > + > > + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); > > + fwnode_handle_put(ep); > > + if (ret) > > + return ret; > > + > > + if (!bus_cfg.nr_of_link_frequencies) { > > + dev_err(dev, "no link frequencies defined"); > > + ret = -EINVAL; > > + goto check_hwcfg_error; > > + } > > + > > + for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) { > > + for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) { > > + if (link_freq_menu_items[i] == > > + bus_cfg.link_frequencies[j]) > > + break; > > + } > > + > > + if (j == bus_cfg.nr_of_link_frequencies) { > > + dev_err(dev, "no link frequency %lld supported", > > + link_freq_menu_items[i]); > > + ret = -EINVAL; > > + goto check_hwcfg_error; > > + } > > + } > > + > > +check_hwcfg_error: > > + v4l2_fwnode_endpoint_free(&bus_cfg); > > + > > + return ret; > > +} > > + > > +static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > + u16 id; > > + u8 pid = 0; > > + u8 ver = 0; > > + int ret; > > + > > + /* Check sensor revision */ > > + ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_H, &pid); > > + if (ret) > > + return ret; > > + > > + ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_L, &ver); > > + if (ret) > > + return ret; > > + > > + id = OV02A10_ID(pid, ver); > > + if (id != CHIP_ID) { > > + dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id); > > + return ret; > > + } > > + > > + dev_info(&client->dev, "Detected OV%04X sensor\n", id); > > + > > + return 0; > > +} > > + > > +static int ov02a10_probe(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct ov02a10 *ov02a10; > > + unsigned int rotation; > > + unsigned int i; > > + int ret; > > + > > + dev_info(dev, "ov02a10 probe aaaa++\n"); > > Please remove. > Fixed in next release. > > + > > + ret = ov02a10_check_hwcfg(dev); > > + if (ret) { > > + dev_err(dev, "failed to check HW configuration: %d", > > + ret); > > + return ret; > > + } > > + > > + ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL); > > + if (!ov02a10) > > + return -ENOMEM; > > + > > + v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops); > > + ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; > > + > > + /* Optional indication of physical rotation of sensor */ > > + ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", > > + &rotation); > > + if (!ret) { > > + switch (rotation) { > > + case 180: > > + ov02a10->upside_down = true; > > + ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10; > > + break; > > + case 0: > > + break; > > + default: > > + dev_warn(dev, "%u degrees rotation is not supported, ignoring...\n", > > + rotation); > > + } > > + } > > + > > + /* Get system clock (eclk) */ > > + ov02a10->eclk = devm_clk_get(dev, "eclk"); > > + if (IS_ERR(ov02a10->eclk)) { > > + dev_err(dev, "failed to get eclk\n"); > > + return -EINVAL; > > + } > > + > > + ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", > > + &ov02a10->eclk_freq); > > + if (ret) { > > + dev_err(dev, "failed to get eclk frequency\n"); > > + return ret; > > + } > > + > > + ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq); > > + if (ret) { > > + dev_err(dev, "failed to set eclk frequency (24MHz)\n"); > > + return ret; > > + } > > + > > + if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) { > > + dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n", > > + ov02a10->eclk_freq, OV02A10_ECLK_FREQ); > > + return -EINVAL; > > + } > > + > > + ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH); > > + if (IS_ERR(ov02a10->pd_gpio)) { > > + dev_err(dev, "failed to get powerdown-gpios\n"); > > + return -EINVAL; > > + } > > + > > + ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > > + if (IS_ERR(ov02a10->n_rst_gpio)) { > > + dev_err(dev, "failed to get reset-gpios\n"); > > + return -EINVAL; > > + } > > + > > + for (i = 0; i < OV02A10_NUM_SUPPLIES; i++) > > + ov02a10->supplies[i].supply = ov02a10_supply_names[i]; > > + > > + ret = devm_regulator_bulk_get(dev, > > + OV02A10_NUM_SUPPLIES, > > Fits on a single line. > Fixed in next release. > > + ov02a10->supplies); > > + if (ret) { > > + dev_err(dev, "failed to get regulators\n"); > > + return ret; > > + } > > + > > + mutex_init(&ov02a10->mutex); > > + ov02a10->cur_mode = &supported_modes[0]; > > + ret = ov02a10_initialize_controls(ov02a10); > > + if (ret) { > > + dev_err(dev, "failed to initialize controls\n"); > > + goto err_destroy_mutex; > > + } > > + > > + ret = __ov02a10_power_on(ov02a10); > > + if (ret) > > + goto err_free_handler; > > + > > + ret = ov02a10_check_sensor_id(ov02a10); > > + if (ret) > > + goto err_power_off; > > + > > + ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops; > > + ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > + ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE; > > + ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad); > > + if (ret < 0) { > > + dev_err(dev, "failed to init entity pads: %d", ret); > > + goto err_power_off; > > + } > > + > > + ret = v4l2_async_register_subdev(&ov02a10->subdev); > > + if (ret) { > > + dev_err(dev, "failed to register V4L2 subdev: %d", > > + ret); > > + goto err_clean_entity; > > + } > > + > > + pm_runtime_set_active(dev); > > + pm_runtime_enable(dev); > > + pm_runtime_idle(dev); > > + > > + dev_info(dev, "ov02a10 probe --\n"); > > Ditto. > Fixed in next release. > > + return 0; > > + > > +err_clean_entity: > > + media_entity_cleanup(&ov02a10->subdev.entity); > > +err_power_off: > > + __ov02a10_power_off(ov02a10); > > +err_free_handler: > > + v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler); > > +err_destroy_mutex: > > + mutex_destroy(&ov02a10->mutex); > > + > > + return ret; > > +} > > + > > +static int ov02a10_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > + v4l2_async_unregister_subdev(sd); > > + media_entity_cleanup(&sd->entity); > > + v4l2_ctrl_handler_free(sd->ctrl_handler); > > + pm_runtime_disable(&client->dev); > > + if (!pm_runtime_status_suspended(&client->dev)) > > + __ov02a10_power_off(ov02a10); > > + pm_runtime_set_suspended(&client->dev); > > + mutex_destroy(&ov02a10->mutex); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ov02a10_of_match[] = { > > + { .compatible = "ovti,ov02a10" }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, ov02a10_of_match); > > + > > +static struct i2c_driver ov02a10_i2c_driver = { > > + .driver = { > > + .name = "ov02a10", > > + .pm = &ov02a10_pm_ops, > > + .of_match_table = ov02a10_of_match, > > + }, > > + .probe_new = &ov02a10_probe, > > + .remove = &ov02a10_remove, > > +}; > > + > > +module_i2c_driver(ov02a10_i2c_driver); > > + > > +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>"); > > +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver"); > > +MODULE_LICENSE("GPL v2"); > > + >
diff --git a/MAINTAINERS b/MAINTAINERS index 41734fb..4b714a2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11821,6 +11821,7 @@ M: Dongchun Zhu <dongchun.zhu@mediatek.com> L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Maintained +F: drivers/media/i2c/ov02a10.c F: Documentation/devicetree/bindings/media/i2c/ov02a10.txt OMNIVISION OV2680 SENSOR DRIVER diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 79ce9ec..22e0db4 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -617,6 +617,17 @@ config VIDEO_IMX355 To compile this driver as a module, choose M here: the module will be called imx355. +config VIDEO_OV02A10 + tristate "OmniVision OV02A10 sensor support" + depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT + help + This is a Video4Linux2 sensor driver for the OmniVision + OV02A10 camera. + + To compile this driver as a module, choose M here: the + module will be called ov02a10. + config VIDEO_OV2640 tristate "OmniVision OV2640 sensor support" depends on VIDEO_V4L2 && I2C diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index fd4ea86..d27f4e2 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o obj-$(CONFIG_VIDEO_OV2640) += ov2640.o obj-$(CONFIG_VIDEO_OV2680) += ov2680.o obj-$(CONFIG_VIDEO_OV2685) += ov2685.o diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c new file mode 100644 index 0000000..fb677d5 --- /dev/null +++ b/drivers/media/i2c/ov02a10.c @@ -0,0 +1,1062 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 MediaTek Inc. + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <media/media-entity.h> +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-fwnode.h> + +#define CHIP_ID 0x2509 +#define OV02A10_REG_CHIP_ID_H 0x02 +#define OV02A10_REG_CHIP_ID_L 0x03 +#define OV02A10_ID(_msb, _lsb) ((_msb) << 8 | (_lsb)) + +/* Bit[1] vertical upside down */ +/* Bit[0] horizontal mirror */ +#define REG_MIRROR_FLIP_CONTROL 0x3f + +/* Orientation */ +#define REG_MIRROR_FLIP_ENABLE 0x03 + +#define REG_PAGE_SWITCH 0xfd +#define REG_GLOBAL_EFFECTIVE 0x01 +#define REG_ENABLE BIT(0) +#define OV02A10_MASK_8_BITS 0xff + +#define REG_SC_CTRL_MODE 0xac +#define SC_CTRL_MODE_STANDBY 0x00 +#define SC_CTRL_MODE_STREAMING 0x01 + +#define OV02A10_EXP_SHIFT 8 +#define OV02A10_REG_EXPOSURE_H 0x03 +#define OV02A10_REG_EXPOSURE_L 0x04 +#define OV02A10_EXPOSURE_MIN 4 +#define OV02A10_EXPOSURE_MAX_MARGIN 4 +#define OV02A10_EXPOSURE_STEP 1 + +#define OV02A10_VTS_SHIFT 8 +#define OV02A10_REG_VTS_H 0x05 +#define OV02A10_REG_VTS_L 0x06 +#define OV02A10_VTS_MAX 0x209f +#define OV02A10_VTS_MIN 0x04cf +#define OV02A10_BASIC_LINE 1224 + +#define OV02A10_REG_GAIN 0x24 +#define OV02A10_GAIN_MIN 0x10 +#define OV02A10_GAIN_MAX 0xf8 +#define OV02A10_GAIN_STEP 0x01 +#define OV02A10_GAIN_DEFAULT 0x40 + +/* Test pattern control */ +#define OV02A10_REG_TEST_PATTERN 0xb6 +#define OV02A10_TEST_PATTERN_ENABLE BIT(0) + +#define OV02A10_LINK_FREQ_390MHZ 390000000ULL +#define OV02A10_ECLK_FREQ 24000000 +#define OV02A10_DATA_LANES 1 +#define OV02A10_BITS_PER_SAMPLE 10 + +static const char * const ov02a10_supply_names[] = { + "dovdd", /* Digital I/O power */ + "avdd", /* Analog power */ + "dvdd", /* Digital core power */ +}; + +#define OV02A10_NUM_SUPPLIES ARRAY_SIZE(ov02a10_supply_names) + +struct ov02a10_reg { + u8 addr; + u8 val; +}; + +struct ov02a10_reg_list { + u32 num_of_regs; + const struct ov02a10_reg *regs; +}; + +struct ov02a10_mode { + u32 width; + u32 height; + u32 exp_def; + u32 hts_def; + u32 vts_def; + const struct ov02a10_reg_list reg_list; +}; + +struct ov02a10 { + struct clk *eclk; + u32 eclk_freq; + + struct gpio_desc *pd_gpio; + struct gpio_desc *n_rst_gpio; + struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES]; + + bool streaming; + bool upside_down; + + /* + * Serialize control access, get/set format, get selection + * and start streaming. + */ + struct mutex mutex; + struct v4l2_subdev subdev; + struct media_pad pad; + struct v4l2_ctrl *anal_gain; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vblank; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *test_pattern; + struct v4l2_mbus_framefmt fmt; + struct v4l2_ctrl_handler ctrl_handler; + + const struct ov02a10_mode *cur_mode; +}; + +static inline struct ov02a10 *to_ov02a10(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov02a10, subdev); +} + +/* + * eclk 24Mhz + * pclk 39Mhz + * linelength 934(0x3a6) + * framelength 1390(0x56E) + * grabwindow_width 1600 + * grabwindow_height 1200 + * max_framerate 30fps + * mipi_datarate per lane 780Mbps + */ +static const struct ov02a10_reg ov02a10_1600x1200_regs[] = { + {0xfd, 0x01}, + {0xac, 0x00}, + {0xfd, 0x00}, + {0x2f, 0x29}, + {0x34, 0x00}, + {0x35, 0x21}, + {0x30, 0x15}, + {0x33, 0x01}, + {0xfd, 0x01}, + {0x44, 0x00}, + {0x2a, 0x4c}, + {0x2b, 0x1e}, + {0x2c, 0x60}, + {0x25, 0x11}, + {0x03, 0x01}, + {0x04, 0xae}, + {0x09, 0x00}, + {0x0a, 0x02}, + {0x06, 0xa6}, + {0x31, 0x00}, + {0x24, 0x40}, + {0x01, 0x01}, + {0xfb, 0x73}, + {0xfd, 0x01}, + {0x16, 0x04}, + {0x1c, 0x09}, + {0x21, 0x42}, + {0x12, 0x04}, + {0x13, 0x10}, + {0x11, 0x40}, + {0x33, 0x81}, + {0xd0, 0x00}, + {0xd1, 0x01}, + {0xd2, 0x00}, + {0x50, 0x10}, + {0x51, 0x23}, + {0x52, 0x20}, + {0x53, 0x10}, + {0x54, 0x02}, + {0x55, 0x20}, + {0x56, 0x02}, + {0x58, 0x48}, + {0x5d, 0x15}, + {0x5e, 0x05}, + {0x66, 0x66}, + {0x68, 0x68}, + {0x6b, 0x00}, + {0x6c, 0x00}, + {0x6f, 0x40}, + {0x70, 0x40}, + {0x71, 0x0a}, + {0x72, 0xf0}, + {0x73, 0x10}, + {0x75, 0x80}, + {0x76, 0x10}, + {0x84, 0x00}, + {0x85, 0x10}, + {0x86, 0x10}, + {0x87, 0x00}, + {0x8a, 0x22}, + {0x8b, 0x22}, + {0x19, 0xf1}, + {0x29, 0x01}, + {0xfd, 0x01}, + {0x9d, 0xd6}, + {0xa0, 0x29}, + {0xa1, 0x03}, + {0xad, 0x62}, + {0xae, 0x00}, + {0xaf, 0x85}, + {0xb1, 0x01}, + {0x8e, 0x06}, + {0x8f, 0x40}, + {0x90, 0x04}, + {0x91, 0xb0}, + {0x45, 0x01}, + {0x46, 0x00}, + {0x47, 0x6c}, + {0x48, 0x03}, + {0x49, 0x8b}, + {0x4a, 0x00}, + {0x4b, 0x07}, + {0x4c, 0x04}, + {0x4d, 0xb7}, + {0xf0, 0x40}, + {0xf1, 0x40}, + {0xf2, 0x40}, + {0xf3, 0x40}, + {0x3f, 0x00}, + {0xfd, 0x01}, + {0x05, 0x00}, + {0x06, 0xa6}, + {0xfd, 0x01}, +}; + +static const char * const ov02a10_test_pattern_menu[] = { + "Disabled", + "Color Bar", +}; + +static const s64 link_freq_menu_items[] = { + OV02A10_LINK_FREQ_390MHZ +}; + +static u64 to_pixel_rate(u32 f_index) +{ + u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV02A10_DATA_LANES; + + do_div(pixel_rate, OV02A10_BITS_PER_SAMPLE); + + return pixel_rate; +} + +static const struct ov02a10_mode supported_modes[] = { + { + .width = 1600, + .height = 1200, + .exp_def = 0x01ae, + .hts_def = 0x03a6, + .vts_def = 0x056e, + .reg_list = { + .num_of_regs = ARRAY_SIZE(ov02a10_1600x1200_regs), + .regs = ov02a10_1600x1200_regs, + }, + }, +}; + +static int ov02a10_write_array(struct ov02a10 *ov02a10, + const struct ov02a10_reg_list *r_list) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + unsigned int i; + int ret; + + for (i = 0; i < r_list->num_of_regs; i++) { + ret = i2c_smbus_write_byte_data(client, + r_list->regs[i].addr, + r_list->regs[i].val); + if (ret < 0) + return ret; + } + + return 0; +} + +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg, + unsigned char *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret >= 0) { + *val = (unsigned char)ret; + ret = 0; + } + + return ret; +} + +static void ov02a10_fill_fmt(const struct ov02a10_mode *mode, + struct v4l2_mbus_framefmt *fmt) +{ + fmt->width = mode->width; + fmt->height = mode->height; + fmt->field = V4L2_FIELD_NONE; +} + +static int ov02a10_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct ov02a10 *ov02a10 = to_ov02a10(sd); + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; + + mutex_lock(&ov02a10->mutex); + + if (ov02a10->streaming) { + mutex_unlock(&ov02a10->mutex); + return -EBUSY; + } + + /* Only one sensor mode supported */ + mbus_fmt->code = ov02a10->fmt.code; + ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); + ov02a10->fmt = fmt->format; + + mutex_unlock(&ov02a10->mutex); + + return 0; +} + +static int ov02a10_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct ov02a10 *ov02a10 = to_ov02a10(sd); + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; + + mutex_lock(&ov02a10->mutex); + + fmt->format = ov02a10->fmt; + mbus_fmt->code = ov02a10->fmt.code; + ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); + + mutex_unlock(&ov02a10->mutex); + + return 0; +} + +static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct ov02a10 *ov02a10 = to_ov02a10(sd); + + if (code->index >= ARRAY_SIZE(supported_modes)) + return -EINVAL; + + code->code = ov02a10->fmt.code; + + return 0; +} + +static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index >= ARRAY_SIZE(supported_modes)) + return -EINVAL; + + fse->min_width = supported_modes[fse->index].width; + fse->max_width = supported_modes[fse->index].width; + fse->max_height = supported_modes[fse->index].height; + fse->min_height = supported_modes[fse->index].height; + + return 0; +} + +static int __ov02a10_power_on(struct ov02a10 *ov02a10) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + struct device *dev = &client->dev; + int ret; + + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, GPIOD_OUT_LOW); + gpiod_set_value_cansleep(ov02a10->pd_gpio, GPIOD_OUT_HIGH); + + ret = clk_prepare_enable(ov02a10->eclk); + if (ret < 0) { + dev_err(dev, "failed to enable eclk\n"); + return ret; + } + + ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); + if (ret < 0) { + dev_err(dev, "failed to enable regulators\n"); + goto disable_clk; + } + usleep_range(5000, 6000); + + gpiod_set_value_cansleep(ov02a10->pd_gpio, GPIOD_OUT_LOW); + usleep_range(5000, 6000); + + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, GPIOD_OUT_HIGH); + usleep_range(5000, 6000); + + return 0; + +disable_clk: + clk_disable_unprepare(ov02a10->eclk); + + return ret; +} + +static void __ov02a10_power_off(struct ov02a10 *ov02a10) +{ + gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1); + clk_disable_unprepare(ov02a10->eclk); + gpiod_set_value_cansleep(ov02a10->pd_gpio, 1); + regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); +} + +static int __ov02a10_start_stream(struct ov02a10 *ov02a10) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + const struct ov02a10_reg_list *reg_list; + int ret; + + /* Apply default values of current mode */ + reg_list = &ov02a10->cur_mode->reg_list; + ret = ov02a10_write_array(ov02a10, reg_list); + if (ret) + return ret; + + /* Apply customized values from user */ + ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler); + if (ret) + return ret; + + /* Set orientation to 180 degree */ + if (ov02a10->upside_down) { + ret = i2c_smbus_write_byte_data(client, REG_MIRROR_FLIP_CONTROL, + REG_MIRROR_FLIP_ENABLE); + if (ret) { + dev_err(&client->dev, "failed to set orientation\n"); + return ret; + } + ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, + REG_ENABLE); + if (ret < 0) + return ret; + } + + /* Set stream on register */ + return i2c_smbus_write_byte_data(client, + REG_SC_CTRL_MODE, SC_CTRL_MODE_STREAMING); +} + +static int __ov02a10_stop_stream(struct ov02a10 *ov02a10) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + + return i2c_smbus_write_byte_data(client, + REG_SC_CTRL_MODE, SC_CTRL_MODE_STANDBY); +} + +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg) +{ + struct ov02a10 *ov02a10 = to_ov02a10(sd); + struct v4l2_subdev_format fmt = { 0 }; + + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + fmt.format.width = ov02a10->cur_mode->width; + fmt.format.height = ov02a10->cur_mode->width; + + ov02a10_set_fmt(sd, cfg, &fmt); + + return 0; +} + +static int ov02a10_s_stream(struct v4l2_subdev *sd, int on) +{ + struct ov02a10 *ov02a10 = to_ov02a10(sd); + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + int ret = 0; + + dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on); + mutex_lock(&ov02a10->mutex); + + if (ov02a10->streaming == on) + goto unlock_and_return; + + if (on) { + ret = pm_runtime_get_sync(&client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&client->dev); + goto unlock_and_return; + } + + ret = __ov02a10_start_stream(ov02a10); + if (ret) { + __ov02a10_stop_stream(ov02a10); + ov02a10->streaming = !on; + goto err_rpm_put; + } + } else { + __ov02a10_stop_stream(ov02a10); + pm_runtime_put(&client->dev); + } + + ov02a10->streaming = on; + mutex_unlock(&ov02a10->mutex); + + return ret; + +err_rpm_put: + pm_runtime_put(&client->dev); +unlock_and_return: + mutex_unlock(&ov02a10->mutex); + + return ret; +} + +static int __maybe_unused ov02a10_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov02a10 *ov02a10 = to_ov02a10(sd); + + return __ov02a10_power_on(ov02a10); +} + +static int __maybe_unused ov02a10_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov02a10 *ov02a10 = to_ov02a10(sd); + + __ov02a10_power_off(ov02a10); + + return 0; +} + +static const struct dev_pm_ops ov02a10_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(ov02a10_runtime_suspend, + ov02a10_runtime_resume, NULL) +}; + +/* + * ov02a10_set_exposure - Function called when setting exposure time + * @priv: Pointer to device structure + * @val: Variable for exposure time, in the unit of micro-second + * + * Set exposure time based on input value. + * + * Return: 0 on success + */ +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + int ret; + + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H, + ((val >> OV02A10_EXP_SHIFT) & + OV02A10_MASK_8_BITS)); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, + (val & OV02A10_MASK_8_BITS)); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, + REG_ENABLE); +} + +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + int ret; + + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, + (val & OV02A10_MASK_8_BITS)); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, + REG_ENABLE); +} + +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + int ret; + + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H, + (((val + ov02a10->cur_mode->height - + OV02A10_BASIC_LINE) >> + OV02A10_VTS_SHIFT) & + OV02A10_MASK_8_BITS)); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, + ((val + ov02a10->cur_mode->height - + OV02A10_BASIC_LINE) & + OV02A10_MASK_8_BITS)); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, + REG_ENABLE); +} + +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + int ret; + + if (pattern) + pattern = OV02A10_TEST_PATTERN_ENABLE; + + ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, OV02A10_REG_TEST_PATTERN, + pattern); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE, + REG_ENABLE); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE, + SC_CTRL_MODE_STREAMING); +} + +static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov02a10 *ov02a10 = container_of(ctrl->handler, + struct ov02a10, ctrl_handler); + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + s64 max_expo; + int ret; + + /* Propagate change of current control to all related controls */ + if (ctrl->id == V4L2_CID_VBLANK) { + /* Update max exposure while meeting expected vblanking */ + max_expo = ov02a10->cur_mode->height + ctrl->val - + OV02A10_EXPOSURE_MAX_MARGIN; + __v4l2_ctrl_modify_range(ov02a10->exposure, + ov02a10->exposure->minimum, max_expo, + ov02a10->exposure->step, + ov02a10->exposure->default_value); + } + + /* V4L2 controls values will be applied only when power is already up */ + if (!pm_runtime_get_if_in_use(&client->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + ret = ov02a10_set_exposure(ov02a10, ctrl->val); + break; + case V4L2_CID_ANALOGUE_GAIN: + ret = ov02a10_set_gain(ov02a10, ctrl->val); + break; + case V4L2_CID_VBLANK: + ret = ov02a10_set_vblank(ov02a10, ctrl->val); + break; + case V4L2_CID_TEST_PATTERN: + ret = ov02a10_set_test_pattern(ov02a10, ctrl->val); + break; + }; + + pm_runtime_put(&client->dev); + + return ret; +} + +static const struct v4l2_subdev_video_ops ov02a10_video_ops = { + .s_stream = ov02a10_s_stream, +}; + +static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = { + .init_cfg = ov02a10_entity_init_cfg, + .enum_mbus_code = ov02a10_enum_mbus_code, + .enum_frame_size = ov02a10_enum_frame_sizes, + .get_fmt = ov02a10_get_fmt, + .set_fmt = ov02a10_set_fmt, +}; + +static const struct v4l2_subdev_ops ov02a10_subdev_ops = { + .video = &ov02a10_video_ops, + .pad = &ov02a10_pad_ops, +}; + +static const struct media_entity_operations ov02a10_subdev_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = { + .s_ctrl = ov02a10_set_ctrl, +}; + +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + const struct ov02a10_mode *mode; + struct v4l2_ctrl_handler *handler; + struct v4l2_ctrl *ctrl; + u64 exposure_max; + u32 pixel_rate, h_blank; + int ret; + + handler = &ov02a10->ctrl_handler; + mode = ov02a10->cur_mode; + ret = v4l2_ctrl_handler_init(handler, 7); + if (ret) + return ret; + + handler->lock = &ov02a10->mutex; + + ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, + 0, 0, link_freq_menu_items); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + pixel_rate = to_pixel_rate(0); + v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, + 0, pixel_rate, 1, pixel_rate); + + h_blank = mode->hts_def - mode->width; + ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK, + h_blank, h_blank, 1, h_blank); + if (ov02a10->hblank) + ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, + V4L2_CID_VBLANK, mode->vts_def - + mode->height, + OV02A10_VTS_MAX - mode->height, 1, + mode->vts_def - mode->height); + + exposure_max = mode->vts_def - 4; + ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, + V4L2_CID_EXPOSURE, + OV02A10_EXPOSURE_MIN, + exposure_max, + OV02A10_EXPOSURE_STEP, + mode->exp_def); + + ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, + V4L2_CID_ANALOGUE_GAIN, + OV02A10_GAIN_MIN, + OV02A10_GAIN_MAX, + OV02A10_GAIN_STEP, + OV02A10_GAIN_DEFAULT); + + ov02a10->test_pattern = + v4l2_ctrl_new_std_menu_items(handler, + &ov02a10_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(ov02a10_test_pattern_menu) - + 1, 0, 0, + ov02a10_test_pattern_menu); + + if (handler->error) { + ret = handler->error; + dev_err(&client->dev, "failed to init controls(%d)\n", ret); + goto err_free_handler; + } + + ov02a10->subdev.ctrl_handler = handler; + + return 0; + +err_free_handler: + v4l2_ctrl_handler_free(handler); + + return ret; +} + +static int ov02a10_check_hwcfg(struct device *dev) +{ + struct fwnode_handle *ep; + struct fwnode_handle *fwnode = dev_fwnode(dev); + struct v4l2_fwnode_endpoint bus_cfg = { + .bus_type = V4L2_MBUS_CSI2_DPHY + }; + unsigned int i, j; + int ret; + + if (!fwnode) + return -ENXIO; + + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); + if (!ep) + return -ENXIO; + + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); + fwnode_handle_put(ep); + if (ret) + return ret; + + if (!bus_cfg.nr_of_link_frequencies) { + dev_err(dev, "no link frequencies defined"); + ret = -EINVAL; + goto check_hwcfg_error; + } + + for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) { + for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) { + if (link_freq_menu_items[i] == + bus_cfg.link_frequencies[j]) + break; + } + + if (j == bus_cfg.nr_of_link_frequencies) { + dev_err(dev, "no link frequency %lld supported", + link_freq_menu_items[i]); + ret = -EINVAL; + goto check_hwcfg_error; + } + } + +check_hwcfg_error: + v4l2_fwnode_endpoint_free(&bus_cfg); + + return ret; +} + +static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); + u16 id; + u8 pid = 0; + u8 ver = 0; + int ret; + + /* Check sensor revision */ + ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_H, &pid); + if (ret) + return ret; + + ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_L, &ver); + if (ret) + return ret; + + id = OV02A10_ID(pid, ver); + if (id != CHIP_ID) { + dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id); + return ret; + } + + dev_info(&client->dev, "Detected OV%04X sensor\n", id); + + return 0; +} + +static int ov02a10_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ov02a10 *ov02a10; + unsigned int rotation; + unsigned int i; + int ret; + + dev_info(dev, "ov02a10 probe aaaa++\n"); + + ret = ov02a10_check_hwcfg(dev); + if (ret) { + dev_err(dev, "failed to check HW configuration: %d", + ret); + return ret; + } + + ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL); + if (!ov02a10) + return -ENOMEM; + + v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops); + ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; + + /* Optional indication of physical rotation of sensor */ + ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", + &rotation); + if (!ret) { + switch (rotation) { + case 180: + ov02a10->upside_down = true; + ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10; + break; + case 0: + break; + default: + dev_warn(dev, "%u degrees rotation is not supported, ignoring...\n", + rotation); + } + } + + /* Get system clock (eclk) */ + ov02a10->eclk = devm_clk_get(dev, "eclk"); + if (IS_ERR(ov02a10->eclk)) { + dev_err(dev, "failed to get eclk\n"); + return -EINVAL; + } + + ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", + &ov02a10->eclk_freq); + if (ret) { + dev_err(dev, "failed to get eclk frequency\n"); + return ret; + } + + ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq); + if (ret) { + dev_err(dev, "failed to set eclk frequency (24MHz)\n"); + return ret; + } + + if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) { + dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n", + ov02a10->eclk_freq, OV02A10_ECLK_FREQ); + return -EINVAL; + } + + ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH); + if (IS_ERR(ov02a10->pd_gpio)) { + dev_err(dev, "failed to get powerdown-gpios\n"); + return -EINVAL; + } + + ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ov02a10->n_rst_gpio)) { + dev_err(dev, "failed to get reset-gpios\n"); + return -EINVAL; + } + + for (i = 0; i < OV02A10_NUM_SUPPLIES; i++) + ov02a10->supplies[i].supply = ov02a10_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, + OV02A10_NUM_SUPPLIES, + ov02a10->supplies); + if (ret) { + dev_err(dev, "failed to get regulators\n"); + return ret; + } + + mutex_init(&ov02a10->mutex); + ov02a10->cur_mode = &supported_modes[0]; + ret = ov02a10_initialize_controls(ov02a10); + if (ret) { + dev_err(dev, "failed to initialize controls\n"); + goto err_destroy_mutex; + } + + ret = __ov02a10_power_on(ov02a10); + if (ret) + goto err_free_handler; + + ret = ov02a10_check_sensor_id(ov02a10); + if (ret) + goto err_power_off; + + ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops; + ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; + ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad); + if (ret < 0) { + dev_err(dev, "failed to init entity pads: %d", ret); + goto err_power_off; + } + + ret = v4l2_async_register_subdev(&ov02a10->subdev); + if (ret) { + dev_err(dev, "failed to register V4L2 subdev: %d", + ret); + goto err_clean_entity; + } + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_idle(dev); + + dev_info(dev, "ov02a10 probe --\n"); + return 0; + +err_clean_entity: + media_entity_cleanup(&ov02a10->subdev.entity); +err_power_off: + __ov02a10_power_off(ov02a10); +err_free_handler: + v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler); +err_destroy_mutex: + mutex_destroy(&ov02a10->mutex); + + return ret; +} + +static int ov02a10_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov02a10 *ov02a10 = to_ov02a10(sd); + + v4l2_async_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(sd->ctrl_handler); + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + __ov02a10_power_off(ov02a10); + pm_runtime_set_suspended(&client->dev); + mutex_destroy(&ov02a10->mutex); + + return 0; +} + +static const struct of_device_id ov02a10_of_match[] = { + { .compatible = "ovti,ov02a10" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ov02a10_of_match); + +static struct i2c_driver ov02a10_i2c_driver = { + .driver = { + .name = "ov02a10", + .pm = &ov02a10_pm_ops, + .of_match_table = ov02a10_of_match, + }, + .probe_new = &ov02a10_probe, + .remove = &ov02a10_remove, +}; + +module_i2c_driver(ov02a10_i2c_driver); + +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>"); +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver"); +MODULE_LICENSE("GPL v2"); +