[v2,3/8] rtw88: 8822c: Enable interrupt migration
diff mbox series

Message ID 1568013371-21805-4-git-send-email-yhchuang@realtek.com
State Accepted
Commit bc61ae96437fb178ca27714967fd8acf1cd91336
Delegated to: Kalle Valo
Headers show
Series
  • rtw88: enhance and stabilize T-Put performance
Related show

Commit Message

Tony Chuang Sept. 9, 2019, 7:16 a.m. UTC
From: Tsang-Shian Lin <thlin@realtek.com>

Enable 8822C Tx/Rx interrupt migration.
In some platforms, performance test may cause heavy cpu loading and get
bad results. Interrupt migration can decrease the amount of interrupts,
and lower cpu loading.

Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---

v1 -> v2
   * no change

 drivers/net/wireless/realtek/rtw88/reg.h      | 2 ++
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 4 ++++
 2 files changed, 6 insertions(+)

Patch
diff mbox series

diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index 0bd0717..78ad053 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -193,6 +193,8 @@ 
 #define REG_H2C_READ_ADDR	0x024C
 #define REG_H2C_INFO		0x0254
 
+#define REG_INT_MIG		0x0304
+
 #define REG_FWHW_TXQ_CTRL	0x0420
 #define BIT_EN_BCNQ_DL		BIT(22)
 #define BIT_EN_WR_FREE_TAIL	BIT(20)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index b072d43..e11bbc3 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1114,6 +1114,7 @@  static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
 #define WLAN_MAC_OPT_NORM_FUNC1		0x98
 #define WLAN_MAC_OPT_LB_FUNC1		0x80
 #define WLAN_MAC_OPT_FUNC2		0x30810041
+#define WLAN_MAC_INT_MIG_CFG		0x33330000
 
 #define WLAN_SIFS_CFG	(WLAN_SIFS_CCK_CONT_TX | \
 			(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
@@ -1251,6 +1252,9 @@  static int rtw8822c_mac_init(struct rtw_dev *rtwdev)
 	value16 = BIT_SET_RXPSF_ERRTHR(value16, 0x07);
 	rtw_write16(rtwdev, REG_RXPSF_CTRL, value16);
 
+	/* Interrupt migration configuration */
+	rtw_write32(rtwdev, REG_INT_MIG, WLAN_MAC_INT_MIG_CFG);
+
 	return 0;
 }