[v2,2/3] iio: adc: hx711: optimize performance in read cycle
diff mbox series

Message ID 20190909123746.lvd2q3dwgaksktuy@arbad
State New
Headers show
Series
  • iio: adc: hx711: fix and optimize sampling of data
Related show

Commit Message

Andreas Klinger Sept. 9, 2019, 12:37 p.m. UTC
Set gain in hx711_reset() to its default value after a reset cycle. This
omits one precautionary read cycle, because the read is performed in
hx711_set_gain_for_channel() anyway if gain has changed.

Check for DOUT low and if its high wait some time if it goes down
instead of doing a blind reset cycle when DOUT is not down.

This is a performance optimization which allows to query the sensor with
a higher frequency.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
---
 drivers/iio/adc/hx711.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

Comments

Jonathan Cameron Sept. 15, 2019, 12:59 p.m. UTC | #1
On Mon, 9 Sep 2019 14:37:48 +0200
Andreas Klinger <ak@it-klinger.de> wrote:

> Set gain in hx711_reset() to its default value after a reset cycle. This
> omits one precautionary read cycle, because the read is performed in
> hx711_set_gain_for_channel() anyway if gain has changed.
> 
> Check for DOUT low and if its high wait some time if it goes down
> instead of doing a blind reset cycle when DOUT is not down.
> 
> This is a performance optimization which allows to query the sensor with
> a higher frequency.
> 
> Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Hi Andreas,

This one seems to have a slightly non trivial interaction with patch 1
so will have to wait until the fixes-togreg branch works it's way back
around to the upstream for the togreg branch.   Give me a poke if I seem
to have lost it!

Thanks,

Jonathan

> ---
>  drivers/iio/adc/hx711.c | 23 +++++------------------
>  1 file changed, 5 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
> index 0678964dbd21..c8686558429b 100644
> --- a/drivers/iio/adc/hx711.c
> +++ b/drivers/iio/adc/hx711.c
> @@ -23,6 +23,7 @@
>  
>  /* gain to pulse and scale conversion */
>  #define HX711_GAIN_MAX		3
> +#define HX711_RESET_GAIN	128
>  
>  struct hx711_gain_to_scale {
>  	int			gain;
> @@ -100,7 +101,6 @@ struct hx711_data {
>  
>  static int hx711_cycle(struct hx711_data *hx711_data)
>  {
> -	int val;
>  	unsigned long flags;
>  
>  	/*
> @@ -186,8 +186,7 @@ static int hx711_wait_for_ready(struct hx711_data *hx711_data)
>  
>  static int hx711_reset(struct hx711_data *hx711_data)
>  {
> -	int ret;
> -	int val = gpiod_get_value(hx711_data->gpiod_dout);
> +	int val = hx711_wait_for_ready(hx711_data);
>  
>  	if (val) {
>  		/*
> @@ -203,22 +202,10 @@ static int hx711_reset(struct hx711_data *hx711_data)
>  		msleep(10);
>  		gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
>  
> -		ret = hx711_wait_for_ready(hx711_data);
> -		if (ret)
> -			return ret;
> -		/*
> -		 * after a reset the gain is 128 so we do a dummy read
> -		 * to set the gain for the next read
> -		 */
> -		ret = hx711_read(hx711_data);
> -		if (ret < 0)
> -			return ret;
> -
> -		/*
> -		 * after a dummy read we need to wait vor readiness
> -		 * for not mixing gain pulses with the clock
> -		 */
>  		val = hx711_wait_for_ready(hx711_data);
> +
> +		/* after a reset the gain is 128 */
> +		hx711_data->gain_set = HX711_RESET_GAIN;
>  	}
>  
>  	return val;

Patch
diff mbox series

diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 0678964dbd21..c8686558429b 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -23,6 +23,7 @@ 
 
 /* gain to pulse and scale conversion */
 #define HX711_GAIN_MAX		3
+#define HX711_RESET_GAIN	128
 
 struct hx711_gain_to_scale {
 	int			gain;
@@ -100,7 +101,6 @@  struct hx711_data {
 
 static int hx711_cycle(struct hx711_data *hx711_data)
 {
-	int val;
 	unsigned long flags;
 
 	/*
@@ -186,8 +186,7 @@  static int hx711_wait_for_ready(struct hx711_data *hx711_data)
 
 static int hx711_reset(struct hx711_data *hx711_data)
 {
-	int ret;
-	int val = gpiod_get_value(hx711_data->gpiod_dout);
+	int val = hx711_wait_for_ready(hx711_data);
 
 	if (val) {
 		/*
@@ -203,22 +202,10 @@  static int hx711_reset(struct hx711_data *hx711_data)
 		msleep(10);
 		gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
 
-		ret = hx711_wait_for_ready(hx711_data);
-		if (ret)
-			return ret;
-		/*
-		 * after a reset the gain is 128 so we do a dummy read
-		 * to set the gain for the next read
-		 */
-		ret = hx711_read(hx711_data);
-		if (ret < 0)
-			return ret;
-
-		/*
-		 * after a dummy read we need to wait vor readiness
-		 * for not mixing gain pulses with the clock
-		 */
 		val = hx711_wait_for_ready(hx711_data);
+
+		/* after a reset the gain is 128 */
+		hx711_data->gain_set = HX711_RESET_GAIN;
 	}
 
 	return val;