diff mbox series

[v4] dmaengine: tegra210-adma: fix transfer failure

Message ID 1568626513-16541-1-git-send-email-spujar@nvidia.com (mailing list archive)
State Accepted
Headers show
Series [v4] dmaengine: tegra210-adma: fix transfer failure | expand

Commit Message

Sameer Pujar Sept. 16, 2019, 9:35 a.m. UTC
From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
configuration register(bits 7:4) which defines the maximum number of reads
from the source and writes to the destination that may be outstanding at
any given point of time. This field must be programmed with a value
between 1 and 8. A value of 0 will prevent any transfers from happening.

Thus added 'has_outstanding_reqs' bool member in chip data structure and is
set to false for Tegra210, since the field is not applicable. For Tegra186
it is set to true and channel configuration is updated with maximum
outstanding requests.

Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
Cc: stable@vger.kernel.org

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
---
 drivers/dma/tegra210-adma.c | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Jon Hunter Sept. 16, 2019, 10:35 a.m. UTC | #1
On 16/09/2019 10:35, Sameer Pujar wrote:
> From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
> configuration register(bits 7:4) which defines the maximum number of reads
> from the source and writes to the destination that may be outstanding at
> any given point of time. This field must be programmed with a value
> between 1 and 8. A value of 0 will prevent any transfers from happening.
> 
> Thus added 'has_outstanding_reqs' bool member in chip data structure and is
> set to false for Tegra210, since the field is not applicable. For Tegra186
> it is set to true and channel configuration is updated with maximum
> outstanding requests.
> 
> Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
> Cc: stable@vger.kernel.org
> 
> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
> ---
>  drivers/dma/tegra210-adma.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
> index 5f8adf5..6e12685 100644
> --- a/drivers/dma/tegra210-adma.c
> +++ b/drivers/dma/tegra210-adma.c
> @@ -40,6 +40,7 @@
>  #define ADMA_CH_CONFIG_MAX_BURST_SIZE                   16
>  #define ADMA_CH_CONFIG_WEIGHT_FOR_WRR(val)		((val) & 0xf)
>  #define ADMA_CH_CONFIG_MAX_BUFS				8
> +#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs)	(reqs << 4)
>  
>  #define ADMA_CH_FIFO_CTRL				0x2c
>  #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
> @@ -77,6 +78,7 @@ struct tegra_adma;
>   * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
>   * @ch_req_rx_shift: Register offset for AHUB receive channel select.
>   * @ch_base_offset: Register offset of DMA channel registers.
> + * @has_outstanding_reqs: If DMA channel can have outstanding requests.
>   * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
>   * @ch_req_mask: Mask for Tx or Rx channel select.
>   * @ch_req_max: Maximum number of Tx or Rx channels available.
> @@ -95,6 +97,7 @@ struct tegra_adma_chip_data {
>  	unsigned int ch_req_max;
>  	unsigned int ch_reg_size;
>  	unsigned int nr_channels;
> +	bool has_outstanding_reqs;
>  };
>  
>  /*
> @@ -594,6 +597,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
>  			 ADMA_CH_CTRL_FLOWCTRL_EN;
>  	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
>  	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
> +	if (cdata->has_outstanding_reqs)
> +		ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8);
>  	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
>  	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
>  
> @@ -778,6 +783,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = {
>  	.ch_req_tx_shift	= 28,
>  	.ch_req_rx_shift	= 24,
>  	.ch_base_offset		= 0,
> +	.has_outstanding_reqs	= false,
>  	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
>  	.ch_req_mask		= 0xf,
>  	.ch_req_max		= 10,
> @@ -792,6 +798,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = {
>  	.ch_req_tx_shift	= 27,
>  	.ch_req_rx_shift	= 22,
>  	.ch_base_offset		= 0x10000,
> +	.has_outstanding_reqs	= true,
>  	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
>  	.ch_req_mask		= 0x1f,
>  	.ch_req_max		= 20,
> 

Acked-by: Jon Hunter <jonathanh@nvidia.com>

Cheers
Jon
Vinod Koul Oct. 14, 2019, 7:11 a.m. UTC | #2
On 16-09-19, 15:05, Sameer Pujar wrote:
> >From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
> configuration register(bits 7:4) which defines the maximum number of reads
> from the source and writes to the destination that may be outstanding at
> any given point of time. This field must be programmed with a value
> between 1 and 8. A value of 0 will prevent any transfers from happening.
> 
> Thus added 'has_outstanding_reqs' bool member in chip data structure and is
> set to false for Tegra210, since the field is not applicable. For Tegra186
> it is set to true and channel configuration is updated with maximum
> outstanding requests.

Applied, thanks
diff mbox series

Patch

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 5f8adf5..6e12685 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -40,6 +40,7 @@ 
 #define ADMA_CH_CONFIG_MAX_BURST_SIZE                   16
 #define ADMA_CH_CONFIG_WEIGHT_FOR_WRR(val)		((val) & 0xf)
 #define ADMA_CH_CONFIG_MAX_BUFS				8
+#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs)	(reqs << 4)
 
 #define ADMA_CH_FIFO_CTRL				0x2c
 #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
@@ -77,6 +78,7 @@  struct tegra_adma;
  * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
  * @ch_req_rx_shift: Register offset for AHUB receive channel select.
  * @ch_base_offset: Register offset of DMA channel registers.
+ * @has_outstanding_reqs: If DMA channel can have outstanding requests.
  * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
  * @ch_req_mask: Mask for Tx or Rx channel select.
  * @ch_req_max: Maximum number of Tx or Rx channels available.
@@ -95,6 +97,7 @@  struct tegra_adma_chip_data {
 	unsigned int ch_req_max;
 	unsigned int ch_reg_size;
 	unsigned int nr_channels;
+	bool has_outstanding_reqs;
 };
 
 /*
@@ -594,6 +597,8 @@  static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
 			 ADMA_CH_CTRL_FLOWCTRL_EN;
 	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
 	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
+	if (cdata->has_outstanding_reqs)
+		ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8);
 	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
 	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
 
@@ -778,6 +783,7 @@  static const struct tegra_adma_chip_data tegra210_chip_data = {
 	.ch_req_tx_shift	= 28,
 	.ch_req_rx_shift	= 24,
 	.ch_base_offset		= 0,
+	.has_outstanding_reqs	= false,
 	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0xf,
 	.ch_req_max		= 10,
@@ -792,6 +798,7 @@  static const struct tegra_adma_chip_data tegra186_chip_data = {
 	.ch_req_tx_shift	= 27,
 	.ch_req_rx_shift	= 22,
 	.ch_base_offset		= 0x10000,
+	.has_outstanding_reqs	= true,
 	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0x1f,
 	.ch_req_max		= 20,