diff mbox series

[v1,9/9] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)

Message ID 20190918104634.15216-10-s.nawrocki@samsung.com (mailing list archive)
State Superseded
Headers show
Series [v1,1/9] ASoC: wm8994: Do not register inapplicable controls for WM1811 | expand

Commit Message

Add sound node and the clock configurations for the I2S controller
for audio support on the Exynos5250 SoC Arndale boards with
WM1811 based audio daugther board.

We need to increase drive strength of the I2S bus, otherwise
the audio CODEC doesn't work. Likely the CODEC's master clock
is the main issue here.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Sept. 19, 2019, 8:26 a.m. UTC | #1
On Wed, Sep 18, 2019 at 12:46:34PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daugther board.
> 
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index dc6fa6fe83f1..62aa6720aa88 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/sound/samsung-i2s.h>
>  #include "exynos5250.dtsi"
>  
>  / {
> @@ -135,6 +136,12 @@
>  		};
>  	};
>  
> +	sound {
> +		compatible = "samsung,arndale-wm1811";
> +		samsung,audio-cpu = <&i2s0>;
> +		samsung,audio-codec = <&wm1811>;
> +	};
> +
>  	fixed-rate-clocks {
>  		xxti {
>  			compatible = "samsung,clock-xxti";
> @@ -499,12 +506,24 @@
>  	};
>  };
>  
> +&clock {
> +	assigned-clocks = <&clock CLK_FOUT_EPLL>;
> +	assigned-clock-rates = <49152000>;
> +};
> +
> +&clock_audss {
> +	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
> +	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
> +};

Put them before "cpu" so alphabetical order is preserved.

Best regards,
Krzysztof

> +
>  &i2c_3 {
>  	status = "okay";
>  
> -	wm1811a@1a {
> +	wm1811: codec@1a {
>  		compatible = "wlf,wm1811";
>  		reg = <0x1a>;
> +		clocks = <&i2s0 CLK_I2S_CDCLK>;
> +		clock-names = "MCLK1";
>  
>  		AVDD2-supply = <&main_dc_reg>;
>  		CPVDD-supply = <&main_dc_reg>;
> @@ -540,9 +559,15 @@
>  };
>  
>  &i2s0 {
> +	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
> +	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
>  	status = "okay";
>  };
>  
> +&i2s0_bus {
> +	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
> +};
> +
>  &mixer {
>  	status = "okay";
>  };
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index dc6fa6fe83f1..62aa6720aa88 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5250.dtsi"
 
 / {
@@ -135,6 +136,12 @@ 
 		};
 	};
 
+	sound {
+		compatible = "samsung,arndale-wm1811";
+		samsung,audio-cpu = <&i2s0>;
+		samsung,audio-codec = <&wm1811>;
+	};
+
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -499,12 +506,24 @@ 
 	};
 };
 
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
 &i2c_3 {
 	status = "okay";
 
-	wm1811a@1a {
+	wm1811: codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "MCLK1";
 
 		AVDD2-supply = <&main_dc_reg>;
 		CPVDD-supply = <&main_dc_reg>;
@@ -540,9 +559,15 @@ 
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 	status = "okay";
 };
 
+&i2s0_bus {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
 &mixer {
 	status = "okay";
 };