| Message ID | 1568887695-3508-1-git-send-email-xuyang2018.jy@cn.fujitsu.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | xfs/148-149: Remove xfs_prepair64 and xfs_prepair tests | expand |
On Thu, Sep 19, 2019 at 06:08:15PM +0800, Yang Xu wrote: > The two commands have obsoleted long time ago, they don't run > on most systems. So I think we can remove them. > > Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> /me has never encountered either of these programs and thinks it's totally fine to remove 148 and 149. I /think/ they're dead? OTOH /me has never encountered either of these programs so someone who knows what they were (are?) should comment about the likelihood of "prepair" ever re-emerging zombie-like from the grave. :) Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> --D > --- > tests/xfs/148 | 93 -------------- > tests/xfs/148.out | 299 ---------------------------------------------- > tests/xfs/149 | 112 ----------------- > tests/xfs/149.out | 123 ------------------- > tests/xfs/group | 2 - > 5 files changed, 629 deletions(-) > delete mode 100755 tests/xfs/148 > delete mode 100644 tests/xfs/148.out > delete mode 100755 tests/xfs/149 > delete mode 100644 tests/xfs/149.out > > diff --git a/tests/xfs/148 b/tests/xfs/148 > deleted file mode 100755 > index d9d7d221..00000000 > --- a/tests/xfs/148 > +++ /dev/null > @@ -1,93 +0,0 @@ > -#! /bin/bash > -# SPDX-License-Identifier: GPL-2.0 > -# Copyright (c) 2006 Silicon Graphics, Inc. All Rights Reserved. > -# > -# FS QA Test No. 148 > -# > -# Exercise xfs parallel repair on broken filesystems > -# This is a clone of test 030 useing xfs_prepair64 instead of xfs_repair > -# > -seq=`basename $0` > -seqres=$RESULT_DIR/$seq > -echo "QA output created by $seq" > - > -here=`pwd` > -tmp=/tmp/$$ > -status=1 # failure is the default! > - > -_cleanup() > -{ > - cd / > - _scratch_unmount 2>/dev/null > - rm -f $tmp.* > -} > - > -trap "_cleanup; exit \$status" 0 1 2 3 15 > - > -# get standard environment, filters and checks > -. ./common/rc > -. ./common/filter > -. ./common/repair > - > -[ -z "$XFS_PARALLEL_REPAIR64_PROG" ] && _notrun "parallel repair binary xfs_prepair64 is not installed" > - > -# force use of parallel repair > -export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR64_PROG > - > -# nuke the superblock, AGI, AGF, AGFL; then try repair the damage > -# > -_check_ag() > -{ > - for structure in 'sb 0' 'agf 0' 'agi 0' 'agfl 0' > - do > - echo "Corrupting $structure - setting bits to $1" > - _check_repair $1 "$structure" > - done > -} > - > -# real QA test starts here > -_supported_fs xfs > -_supported_os Linux > - > -_require_scratch > -_require_no_large_scratch_dev > - > -DSIZE="-dsize=100m" > - > -# first we need to ensure there are no bogus secondary > -# superblocks between the primary and first secondary > -# superblock (hanging around from earlier tests)... > -# > - > -_scratch_mkfs_xfs $DSIZE >/dev/null 2>&1 > -if [ $? -ne 0 ] # probably don't have a big enough scratch > -then > - _notrun "SCRATCH_DEV too small, results would be non-deterministic" > -else > - _scratch_mount > - src/feature -U $SCRATCH_DEV && \ > - _notrun "UQuota are enabled, test needs controlled sb recovery" > - src/feature -G $SCRATCH_DEV && \ > - _notrun "GQuota are enabled, test needs controlled sb recovery" > - src/feature -P $SCRATCH_DEV && \ > - _notrun "PQuota are enabled, test needs controlled sb recovery" > - _scratch_unmount > -fi > -clear="" > -eval `xfs_db -r -c "sb 1" -c stack $SCRATCH_DEV | $PERL_PROG -ne ' > - if (/byte offset (\d+), length (\d+)/) { > - print "clear=", $1 / 512, "\n"; exit > - }'` > -[ -z "$clear" ] && echo "Cannot calculate length to clear" > -src/devzero -v -1 -n "$clear" $SCRATCH_DEV >/dev/null > - > -# now kick off the real prepair test... > -# > -_scratch_mkfs_xfs $DSIZE | _filter_mkfs 2>$tmp.mkfs > -. $tmp.mkfs > -_check_ag 0 > -_check_ag -1 > - > -# success, all done > -status=0 > -exit > diff --git a/tests/xfs/148.out b/tests/xfs/148.out > deleted file mode 100644 > index c8fb5511..00000000 > --- a/tests/xfs/148.out > +++ /dev/null > @@ -1,299 +0,0 @@ > -QA output created by 148 > -meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks > -data = bsize=XXX blocks=XXX, imaxpct=PCT > - = sunit=XXX swidth=XXX, unwritten=X > -naming =VERN bsize=XXX > -log =LDEV bsize=XXX blocks=XXX > -realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX > -Corrupting sb 0 - setting bits to 0 > -Wrote X.XXKb (value 0x0) > -Phase 1 - find and verify superblock... > -bad primary superblock - bad magic number !!! > - > -attempting to find secondary superblock... > -found candidate secondary superblock... > -verified secondary superblock... > -writing modified primary superblock > -sb root inode value INO inconsistent with calculated value INO > -resetting superblock root inode pointer to INO > -sb realtime bitmap inode INO inconsistent with calculated value INO > -resetting superblock realtime bitmap ino pointer to INO > -sb realtime summary inode INO inconsistent with calculated value INO > -resetting superblock realtime summary ino pointer to INO > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > - - found root inode chunk > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -Note - stripe unit (SU) and width (SW) fields have been reset. > -Please set with mount -o sunit=<value>,swidth=<value> > -done > -Corrupting agf 0 - setting bits to 0 > -Wrote X.XXKb (value 0x0) > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > -bad magic # 0x0 for agf 0 > -bad version # 0 for agf 0 > -bad length 0 for agf 0, should be LENGTH > -reset bad agf for ag 0 > -bad agbno AGBNO for btbno root, agno 0 > -bad agbno AGBNO for btbcnt root, agno 0 > - - found root inode chunk > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -done > -Corrupting agi 0 - setting bits to 0 > -Wrote X.XXKb (value 0x0) > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > -bad magic # 0x0 for agi 0 > -bad version # 0 for agi 0 > -bad length # 0 for agi 0, should be LENGTH > -reset bad agi for ag 0 > -bad agbno AGBNO for inobt root, agno 0 > -root inode chunk not found > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > -error following ag 0 unlinked list > - - process known inodes and perform inode discovery... > -imap claims in-use inode INO is free, correcting imap > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -done > -Corrupting agfl 0 - setting bits to 0 > -Wrote X.XXKb (value 0x0) > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > - - found root inode chunk > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -done > -Corrupting sb 0 - setting bits to -1 > -Wrote X.XXKb (value 0xffffffff) > -Phase 1 - find and verify superblock... > -bad primary superblock - bad magic number !!! > - > -attempting to find secondary superblock... > -found candidate secondary superblock... > -verified secondary superblock... > -writing modified primary superblock > -sb root inode value INO inconsistent with calculated value INO > -resetting superblock root inode pointer to INO > -sb realtime bitmap inode INO inconsistent with calculated value INO > -resetting superblock realtime bitmap ino pointer to INO > -sb realtime summary inode INO inconsistent with calculated value INO > -resetting superblock realtime summary ino pointer to INO > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > - - found root inode chunk > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -Note - stripe unit (SU) and width (SW) fields have been reset. > -Please set with mount -o sunit=<value>,swidth=<value> > -done > -Corrupting agf 0 - setting bits to -1 > -Wrote X.XXKb (value 0xffffffff) > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > -bad magic # 0xffffffff for agf 0 > -bad version # -1 for agf 0 > -bad sequence # -1 for agf 0 > -bad length -1 for agf 0, should be LENGTH > -flfirst -1 in agf 0 too large (max = MAX) > -fllast -1 in agf 0 too large (max = MAX) > -reset bad agf for ag 0 > -freeblk count 1 != flcount -1 in ag 0 > -bad agbno AGBNO for btbno root, agno 0 > -bad agbno AGBNO for btbcnt root, agno 0 > - - found root inode chunk > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -done > -Corrupting agi 0 - setting bits to -1 > -Wrote X.XXKb (value 0xffffffff) > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > -bad magic # 0xffffffff for agi 0 > -bad version # -1 for agi 0 > -bad sequence # -1 for agi 0 > -bad length # -1 for agi 0, should be LENGTH > -reset bad agi for ag 0 > -bad agbno AGBNO for inobt root, agno 0 > -root inode chunk not found > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > -imap claims in-use inode INO is free, correcting imap > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -done > -Corrupting agfl 0 - setting bits to -1 > -Wrote X.XXKb (value 0xffffffff) > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > - - zero log... > - - scan filesystem freespace and inode maps... > -bad agbno AGBNO in agfl, agno 0 > -bad agbno AGBNO in agfl, agno 0 > -bad agbno AGBNO in agfl, agno 0 > -bad agbno AGBNO in agfl, agno 0 > - - found root inode chunk > -Phase 3 - for each AG... > - - scan and clear agi unlinked lists... > - - process known inodes and perform inode discovery... > - - process newly discovered inodes... > -Phase 4 - check for duplicate blocks... > - - setting up duplicate extent list... > - - clear lost+found (if it exists) ... > - - clearing existing "lost+found" inode > - - deleting existing "lost+found" entry > - - check for inodes claiming duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > - - reset superblock... > -Phase 6 - check inode connectivity... > - - resetting contents of realtime bitmap and summary inodes > - - ensuring existence of lost+found directory > - - traversing filesystem starting at / ... > - - traversal finished ... > - - traversing all unattached subtrees ... > - - traversals finished ... > - - moving disconnected inodes to lost+found ... > -Phase 7 - verify and correct link counts... > -done > diff --git a/tests/xfs/149 b/tests/xfs/149 > deleted file mode 100755 > index fbf66872..00000000 > --- a/tests/xfs/149 > +++ /dev/null > @@ -1,112 +0,0 @@ > -#! /bin/bash > -# SPDX-License-Identifier: GPL-2.0 > -# Copyright (c) 2000-2002 Silicon Graphics, Inc. All Rights Reserved. > -# > -# FS QA Test No. 149 > -# > -# Exercise xfs_prepair - ensure repeated use doesn't corrupt > -# This is a clone of test 031 using xfs_prepair instead of xfs_repair > -# > -seq=`basename $0` > -seqres=$RESULT_DIR/$seq > -echo "QA output created by $seq" > - > -here=`pwd` > -tmp=/tmp/$$ > -status=1 # failure is the default! > -trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 > -rm -f $seqres.full > - > -# get standard environment, filters and checks > -. ./common/rc > -. ./common/repair > -. ./common/filter > - > -[ -z "$XFS_PARALLEL_REPAIR_PROG" ] && _notrun "parallel repair binary xfs_prepair is not installed" > - > -# force use of parallel repair > -export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR_PROG > - > -_check_repair() > -{ > - echo "Repairing, round 0" >> $seqres.full > - _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seqres.full >$tmp.0 > - for i in 1 2 3 4 > - do > - echo "Repairing, iteration $i" | tee -a $seqres.full > - _scratch_xfs_repair 2>&1 | _filter_repair >$tmp.$i > - diff $tmp.0 $tmp.$i >> $seqres.full > - if [ $? -ne 0 ]; then > - echo "ERROR: repair round $i differs to round 0 (see $seqres.full)" | tee -a $seqres.full > - break > - fi > - # echo all interesting stuff... > - perl -ne ' > - s/(rebuilding directory inode) (\d+)/\1 INO/g; > - s/internal log/<TYPEOF> log/g; > - s/external log on \S+/<TYPEOF> log/g; > - /^\S+/ && print; > - ' $tmp.$i > - done > - echo > -} > - > -# prototype file to create various directory forms > -_create_proto() > -{ > - total=$1 > - count=0 > - > - # take inode size into account for non-shortform directories... > - [ $total -gt 0 ] && total=`expr $total \* $isize / 512` > - > - cat >$tmp.proto <<EOF > -DUMMY1 > -0 0 > -: root directory > -d--777 3 1 > -lost+found d--755 3 1 > -$ > -EOF > - > - while [ $count -lt $total ] > - do > - let count=$count+1 > - cat >>$tmp.proto <<EOF > -${count}_of_${total}_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ---755 3 1 /bin/true > -EOF > - done > - echo '$' >>$tmp.proto > -} > - > -# real QA test starts here > -_supported_fs xfs > -_supported_os Linux > - > -_require_scratch > -_require_no_large_scratch_dev > - > -# sanity test - default + one root directory entry > -# Note: must do this proto/mkfs now for later inode size calcs > -_create_proto 0 > -echo "=== one entry (shortform)" > -_scratch_mkfs_xfs -p $tmp.proto >$tmp.mkfs0 2>&1 > -_filter_mkfs <$tmp.mkfs0 >/dev/null 2>$tmp.mkfs > -. $tmp.mkfs > -_check_repair > - > -# block-form root directory & repeat > -_create_proto 20 > -echo "=== twenty entries (block form)" > -_scratch_mkfs_xfs -p $tmp.proto | _filter_mkfs >/dev/null 2>&1 > -_check_repair > - > -# leaf-form root directory & repeat > -_create_proto 1000 > -echo "=== thousand entries (leaf form)" > -_scratch_mkfs_xfs -p $tmp.proto | _filter_mkfs >/dev/null 2>&1 > -_check_repair > - > -# success, all done > -status=0 > -exit > diff --git a/tests/xfs/149.out b/tests/xfs/149.out > deleted file mode 100644 > index 0c65cd98..00000000 > --- a/tests/xfs/149.out > +++ /dev/null > @@ -1,123 +0,0 @@ > -QA output created by 149 > -=== one entry (shortform) > -Repairing, iteration 1 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 2 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 3 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 4 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -Phase 7 - verify and correct link counts... > -done > - > -=== twenty entries (block form) > -Repairing, iteration 1 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 2 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 3 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 4 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > - > -=== thousand entries (leaf form) > -Repairing, iteration 1 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 2 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 3 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > -Repairing, iteration 4 > -Phase 1 - find and verify superblock... > -Phase 2 - using <TYPEOF> log > -Phase 3 - for each AG... > -Phase 4 - check for duplicate blocks... > -Phase 5 - rebuild AG headers and trees... > -Phase 6 - check inode connectivity... > -rebuilding directory inode INO > -Phase 7 - verify and correct link counts... > -done > - > diff --git a/tests/xfs/group b/tests/xfs/group > index a7ad300e..f4ebcd8c 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -145,8 +145,6 @@ > 145 dmapi > 146 dmapi > 147 dmapi > -148 repair auto > -149 repair auto > 150 dmapi > 151 dmapi > 152 dmapi > -- > 2.18.1 > > >
diff --git a/tests/xfs/148 b/tests/xfs/148 deleted file mode 100755 index d9d7d221..00000000 --- a/tests/xfs/148 +++ /dev/null @@ -1,93 +0,0 @@ -#! /bin/bash -# SPDX-License-Identifier: GPL-2.0 -# Copyright (c) 2006 Silicon Graphics, Inc. All Rights Reserved. -# -# FS QA Test No. 148 -# -# Exercise xfs parallel repair on broken filesystems -# This is a clone of test 030 useing xfs_prepair64 instead of xfs_repair -# -seq=`basename $0` -seqres=$RESULT_DIR/$seq -echo "QA output created by $seq" - -here=`pwd` -tmp=/tmp/$$ -status=1 # failure is the default! - -_cleanup() -{ - cd / - _scratch_unmount 2>/dev/null - rm -f $tmp.* -} - -trap "_cleanup; exit \$status" 0 1 2 3 15 - -# get standard environment, filters and checks -. ./common/rc -. ./common/filter -. ./common/repair - -[ -z "$XFS_PARALLEL_REPAIR64_PROG" ] && _notrun "parallel repair binary xfs_prepair64 is not installed" - -# force use of parallel repair -export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR64_PROG - -# nuke the superblock, AGI, AGF, AGFL; then try repair the damage -# -_check_ag() -{ - for structure in 'sb 0' 'agf 0' 'agi 0' 'agfl 0' - do - echo "Corrupting $structure - setting bits to $1" - _check_repair $1 "$structure" - done -} - -# real QA test starts here -_supported_fs xfs -_supported_os Linux - -_require_scratch -_require_no_large_scratch_dev - -DSIZE="-dsize=100m" - -# first we need to ensure there are no bogus secondary -# superblocks between the primary and first secondary -# superblock (hanging around from earlier tests)... -# - -_scratch_mkfs_xfs $DSIZE >/dev/null 2>&1 -if [ $? -ne 0 ] # probably don't have a big enough scratch -then - _notrun "SCRATCH_DEV too small, results would be non-deterministic" -else - _scratch_mount - src/feature -U $SCRATCH_DEV && \ - _notrun "UQuota are enabled, test needs controlled sb recovery" - src/feature -G $SCRATCH_DEV && \ - _notrun "GQuota are enabled, test needs controlled sb recovery" - src/feature -P $SCRATCH_DEV && \ - _notrun "PQuota are enabled, test needs controlled sb recovery" - _scratch_unmount -fi -clear="" -eval `xfs_db -r -c "sb 1" -c stack $SCRATCH_DEV | $PERL_PROG -ne ' - if (/byte offset (\d+), length (\d+)/) { - print "clear=", $1 / 512, "\n"; exit - }'` -[ -z "$clear" ] && echo "Cannot calculate length to clear" -src/devzero -v -1 -n "$clear" $SCRATCH_DEV >/dev/null - -# now kick off the real prepair test... -# -_scratch_mkfs_xfs $DSIZE | _filter_mkfs 2>$tmp.mkfs -. $tmp.mkfs -_check_ag 0 -_check_ag -1 - -# success, all done -status=0 -exit diff --git a/tests/xfs/148.out b/tests/xfs/148.out deleted file mode 100644 index c8fb5511..00000000 --- a/tests/xfs/148.out +++ /dev/null @@ -1,299 +0,0 @@ -QA output created by 148 -meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks -data = bsize=XXX blocks=XXX, imaxpct=PCT - = sunit=XXX swidth=XXX, unwritten=X -naming =VERN bsize=XXX -log =LDEV bsize=XXX blocks=XXX -realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX -Corrupting sb 0 - setting bits to 0 -Wrote X.XXKb (value 0x0) -Phase 1 - find and verify superblock... -bad primary superblock - bad magic number !!! - -attempting to find secondary superblock... -found candidate secondary superblock... -verified secondary superblock... -writing modified primary superblock -sb root inode value INO inconsistent with calculated value INO -resetting superblock root inode pointer to INO -sb realtime bitmap inode INO inconsistent with calculated value INO -resetting superblock realtime bitmap ino pointer to INO -sb realtime summary inode INO inconsistent with calculated value INO -resetting superblock realtime summary ino pointer to INO -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -Note - stripe unit (SU) and width (SW) fields have been reset. -Please set with mount -o sunit=<value>,swidth=<value> -done -Corrupting agf 0 - setting bits to 0 -Wrote X.XXKb (value 0x0) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... -bad magic # 0x0 for agf 0 -bad version # 0 for agf 0 -bad length 0 for agf 0, should be LENGTH -reset bad agf for ag 0 -bad agbno AGBNO for btbno root, agno 0 -bad agbno AGBNO for btbcnt root, agno 0 - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting agi 0 - setting bits to 0 -Wrote X.XXKb (value 0x0) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... -bad magic # 0x0 for agi 0 -bad version # 0 for agi 0 -bad length # 0 for agi 0, should be LENGTH -reset bad agi for ag 0 -bad agbno AGBNO for inobt root, agno 0 -root inode chunk not found -Phase 3 - for each AG... - - scan and clear agi unlinked lists... -error following ag 0 unlinked list - - process known inodes and perform inode discovery... -imap claims in-use inode INO is free, correcting imap - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting agfl 0 - setting bits to 0 -Wrote X.XXKb (value 0x0) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting sb 0 - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -bad primary superblock - bad magic number !!! - -attempting to find secondary superblock... -found candidate secondary superblock... -verified secondary superblock... -writing modified primary superblock -sb root inode value INO inconsistent with calculated value INO -resetting superblock root inode pointer to INO -sb realtime bitmap inode INO inconsistent with calculated value INO -resetting superblock realtime bitmap ino pointer to INO -sb realtime summary inode INO inconsistent with calculated value INO -resetting superblock realtime summary ino pointer to INO -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -Note - stripe unit (SU) and width (SW) fields have been reset. -Please set with mount -o sunit=<value>,swidth=<value> -done -Corrupting agf 0 - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... -bad magic # 0xffffffff for agf 0 -bad version # -1 for agf 0 -bad sequence # -1 for agf 0 -bad length -1 for agf 0, should be LENGTH -flfirst -1 in agf 0 too large (max = MAX) -fllast -1 in agf 0 too large (max = MAX) -reset bad agf for ag 0 -freeblk count 1 != flcount -1 in ag 0 -bad agbno AGBNO for btbno root, agno 0 -bad agbno AGBNO for btbcnt root, agno 0 - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting agi 0 - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... -bad magic # 0xffffffff for agi 0 -bad version # -1 for agi 0 -bad sequence # -1 for agi 0 -bad length # -1 for agi 0, should be LENGTH -reset bad agi for ag 0 -bad agbno AGBNO for inobt root, agno 0 -root inode chunk not found -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... -imap claims in-use inode INO is free, correcting imap - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting agfl 0 - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... -bad agbno AGBNO in agfl, agno 0 -bad agbno AGBNO in agfl, agno 0 -bad agbno AGBNO in agfl, agno 0 -bad agbno AGBNO in agfl, agno 0 - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - clear lost+found (if it exists) ... - - clearing existing "lost+found" inode - - deleting existing "lost+found" entry - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... - - resetting contents of realtime bitmap and summary inodes - - ensuring existence of lost+found directory - - traversing filesystem starting at / ... - - traversal finished ... - - traversing all unattached subtrees ... - - traversals finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done diff --git a/tests/xfs/149 b/tests/xfs/149 deleted file mode 100755 index fbf66872..00000000 --- a/tests/xfs/149 +++ /dev/null @@ -1,112 +0,0 @@ -#! /bin/bash -# SPDX-License-Identifier: GPL-2.0 -# Copyright (c) 2000-2002 Silicon Graphics, Inc. All Rights Reserved. -# -# FS QA Test No. 149 -# -# Exercise xfs_prepair - ensure repeated use doesn't corrupt -# This is a clone of test 031 using xfs_prepair instead of xfs_repair -# -seq=`basename $0` -seqres=$RESULT_DIR/$seq -echo "QA output created by $seq" - -here=`pwd` -tmp=/tmp/$$ -status=1 # failure is the default! -trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 -rm -f $seqres.full - -# get standard environment, filters and checks -. ./common/rc -. ./common/repair -. ./common/filter - -[ -z "$XFS_PARALLEL_REPAIR_PROG" ] && _notrun "parallel repair binary xfs_prepair is not installed" - -# force use of parallel repair -export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR_PROG - -_check_repair() -{ - echo "Repairing, round 0" >> $seqres.full - _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seqres.full >$tmp.0 - for i in 1 2 3 4 - do - echo "Repairing, iteration $i" | tee -a $seqres.full - _scratch_xfs_repair 2>&1 | _filter_repair >$tmp.$i - diff $tmp.0 $tmp.$i >> $seqres.full - if [ $? -ne 0 ]; then - echo "ERROR: repair round $i differs to round 0 (see $seqres.full)" | tee -a $seqres.full - break - fi - # echo all interesting stuff... - perl -ne ' - s/(rebuilding directory inode) (\d+)/\1 INO/g; - s/internal log/<TYPEOF> log/g; - s/external log on \S+/<TYPEOF> log/g; - /^\S+/ && print; - ' $tmp.$i - done - echo -} - -# prototype file to create various directory forms -_create_proto() -{ - total=$1 - count=0 - - # take inode size into account for non-shortform directories... - [ $total -gt 0 ] && total=`expr $total \* $isize / 512` - - cat >$tmp.proto <<EOF -DUMMY1 -0 0 -: root directory -d--777 3 1 -lost+found d--755 3 1 -$ -EOF - - while [ $count -lt $total ] - do - let count=$count+1 - cat >>$tmp.proto <<EOF -${count}_of_${total}_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ---755 3 1 /bin/true -EOF - done - echo '$' >>$tmp.proto -} - -# real QA test starts here -_supported_fs xfs -_supported_os Linux - -_require_scratch -_require_no_large_scratch_dev - -# sanity test - default + one root directory entry -# Note: must do this proto/mkfs now for later inode size calcs -_create_proto 0 -echo "=== one entry (shortform)" -_scratch_mkfs_xfs -p $tmp.proto >$tmp.mkfs0 2>&1 -_filter_mkfs <$tmp.mkfs0 >/dev/null 2>$tmp.mkfs -. $tmp.mkfs -_check_repair - -# block-form root directory & repeat -_create_proto 20 -echo "=== twenty entries (block form)" -_scratch_mkfs_xfs -p $tmp.proto | _filter_mkfs >/dev/null 2>&1 -_check_repair - -# leaf-form root directory & repeat -_create_proto 1000 -echo "=== thousand entries (leaf form)" -_scratch_mkfs_xfs -p $tmp.proto | _filter_mkfs >/dev/null 2>&1 -_check_repair - -# success, all done -status=0 -exit diff --git a/tests/xfs/149.out b/tests/xfs/149.out deleted file mode 100644 index 0c65cd98..00000000 --- a/tests/xfs/149.out +++ /dev/null @@ -1,123 +0,0 @@ -QA output created by 149 -=== one entry (shortform) -Repairing, iteration 1 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -Phase 7 - verify and correct link counts... -done -Repairing, iteration 2 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -Phase 7 - verify and correct link counts... -done -Repairing, iteration 3 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -Phase 7 - verify and correct link counts... -done -Repairing, iteration 4 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -Phase 7 - verify and correct link counts... -done - -=== twenty entries (block form) -Repairing, iteration 1 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done -Repairing, iteration 2 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done -Repairing, iteration 3 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done -Repairing, iteration 4 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done - -=== thousand entries (leaf form) -Repairing, iteration 1 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done -Repairing, iteration 2 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done -Repairing, iteration 3 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done -Repairing, iteration 4 -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log -Phase 3 - for each AG... -Phase 4 - check for duplicate blocks... -Phase 5 - rebuild AG headers and trees... -Phase 6 - check inode connectivity... -rebuilding directory inode INO -Phase 7 - verify and correct link counts... -done - diff --git a/tests/xfs/group b/tests/xfs/group index a7ad300e..f4ebcd8c 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -145,8 +145,6 @@ 145 dmapi 146 dmapi 147 dmapi -148 repair auto -149 repair auto 150 dmapi 151 dmapi 152 dmapi
The two commands have obsoleted long time ago, they don't run on most systems. So I think we can remove them. Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> --- tests/xfs/148 | 93 -------------- tests/xfs/148.out | 299 ---------------------------------------------- tests/xfs/149 | 112 ----------------- tests/xfs/149.out | 123 ------------------- tests/xfs/group | 2 - 5 files changed, 629 deletions(-) delete mode 100755 tests/xfs/148 delete mode 100644 tests/xfs/148.out delete mode 100755 tests/xfs/149 delete mode 100644 tests/xfs/149.out