diff mbox series

[2/3] soc: amlogic: Add support for Secure power domains controller

Message ID 1568895064-4116-3-git-send-email-jianxin.pan@amlogic.com (mailing list archive)
State New, archived
Headers show
Series arm64: meson: add support for A1 Power Domains | expand

Commit Message

Jianxin Pan Sept. 19, 2019, 12:11 p.m. UTC
Add support for the Amlogic Secure Power controller. In A1/C1 series, power
control registers are in secure domain, and should be accessed by smc.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Zhiqiang Liang <zhiqiang.liang@amlogic.com>
---
 drivers/soc/amlogic/Kconfig             |  13 +++
 drivers/soc/amlogic/Makefile            |   1 +
 drivers/soc/amlogic/meson-secure-pwrc.c | 182 ++++++++++++++++++++++++++++++++
 3 files changed, 196 insertions(+)
 create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c

Comments

Martin Blumenstingl Sept. 19, 2019, 8:03 p.m. UTC | #1
Hi Jianxin,

I added three comments below from a quick glance at this driver (I
didn't have time for a complete review)

On Thu, Sep 19, 2019 at 2:11 PM Jianxin Pan <jianxin.pan@amlogic.com> wrote:
[...]
> +               pm_genpd_init(&dom->base, NULL,
> +                             (match->domains[i].get_power ?
> +                             match->domains[i].get_power(dom) : true));
.get_power is never NULL in this driver so the ": true" part is
effectively a no-op

[...]
> +static const struct of_device_id meson_secure_pwrc_match_table[] = {
> +       {
> +               .compatible = "amlogic,meson-a1-pwrc",
> +               .data = &meson_secure_a1_pwrc_data,
> +       },
> +       { }
many drivers use a /* sentinel */ comment inside { }

[...]
> +arch_initcall_sync(meson_secure_pwrc_init);
why arch_initcall_sync instead of builtin_platform_driver?
$ grep -R arch_initcall_sync drivers/soc/
$


Martin
Jianxin Pan Sept. 20, 2019, 7:58 a.m. UTC | #2
Hi Martin,

On 2019/9/20 4:03, Martin Blumenstingl wrote:
> Hi Jianxin,
> 
> I added three comments below from a quick glance at this driver (I
> didn't have time for a complete review)
> 
> On Thu, Sep 19, 2019 at 2:11 PM Jianxin Pan <jianxin.pan@amlogic.com> wrote:
> [...]
>> +               pm_genpd_init(&dom->base, NULL,
>> +                             (match->domains[i].get_power ?
>> +                             match->domains[i].get_power(dom) : true));
> .get_power is never NULL in this driver so the ": true" part is
> effectively a no-op
> 
OK, I will remove it. Thanks for your time.
> [...]
>> +static const struct of_device_id meson_secure_pwrc_match_table[] = {
>> +       {
>> +               .compatible = "amlogic,meson-a1-pwrc",
>> +               .data = &meson_secure_a1_pwrc_data,
>> +       },
>> +       { }
> many drivers use a /* sentinel */ comment inside { }
> 
OK, I will add this comment line.
> [...]
>> +arch_initcall_sync(meson_secure_pwrc_init);
> why arch_initcall_sync instead of builtin_platform_driver?
> $ grep -R arch_initcall_sync drivers/soc/
> $
> 
> 
> Martin
> 
The power-domain is depended by many other drivers, arch_initcall_sync is used to make power-domain probe earlier.
Maybe I need to switch back to builtin_platform_driver when use APIs from meson_sm.c. 
> .
>
Kevin Hilman Sept. 25, 2019, 10:41 p.m. UTC | #3
Hi Jianxin,

Jianxin Pan <jianxin.pan@amlogic.com> writes:

> Add support for the Amlogic Secure Power controller. In A1/C1 series, power
> control registers are in secure domain, and should be accessed by smc.
>
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> Signed-off-by: Zhiqiang Liang <zhiqiang.liang@amlogic.com>

Thanks for the new power domain driver.

> ---
>  drivers/soc/amlogic/Kconfig             |  13 +++
>  drivers/soc/amlogic/Makefile            |   1 +
>  drivers/soc/amlogic/meson-secure-pwrc.c | 182 ++++++++++++++++++++++++++++++++
>  3 files changed, 196 insertions(+)
>  create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c
>
> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
> index bc2c912..6cb06e7 100644
> --- a/drivers/soc/amlogic/Kconfig
> +++ b/drivers/soc/amlogic/Kconfig
> @@ -48,6 +48,19 @@ config MESON_EE_PM_DOMAINS
>  	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
>  	  Generic Power Domains.
>  
> +config MESON_SECURE_PM_DOMAINS
> +	bool "Amlogic Meson Secure Power Domains driver"
> +	depends on ARCH_MESON || COMPILE_TEST
> +	depends on PM && OF
> +	depends on HAVE_ARM_SMCCC
> +	default ARCH_MESON
> +	select PM_GENERIC_DOMAINS
> +	select PM_GENERIC_DOMAINS_OF
> +	help
> +	  Support for the power controller on Amlogic A1/C1 series.
> +	  Say yes to expose Amlogic Meson Secure Power Domains as Generic
> +	  Power Domains.
> +
>  config MESON_MX_SOCINFO
>  	bool "Amlogic Meson MX SoC Information driver"
>  	depends on ARCH_MESON || COMPILE_TEST
> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
> index de79d044..7b8c5d3 100644
> --- a/drivers/soc/amlogic/Makefile
> +++ b/drivers/soc/amlogic/Makefile
> @@ -5,3 +5,4 @@ obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
>  obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
>  obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
>  obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
> +obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> new file mode 100644
> index 00000000..00c7232
> --- /dev/null
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -0,0 +1,182 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc.
> + * Author: Jianxin Pan <jianxin.pan@amlogic.com>
> + */
> +#include <linux/io.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <dt-bindings/power/meson-a1-power.h>
> +#include <linux/arm-smccc.h>
> +
> +#define PWRC_ON		1
> +#define PWRC_OFF	0
> +#define SMC_PWRC_SET	0x82000093
> +#define SMC_PWRC_GET	0x82000095
> +
> +struct meson_secure_pwrc_domain {
> +	struct generic_pm_domain base;
> +	unsigned int index;
> +};
> +
> +struct meson_secure_pwrc {
> +	struct meson_secure_pwrc_domain *domains;
> +	struct genpd_onecell_data xlate;
> +};
> +
> +struct meson_secure_pwrc_domain_desc {
> +	unsigned int index;
> +	unsigned int flags;
> +	char *name;
> +	bool (*get_power)(struct meson_secure_pwrc_domain *pwrc_domain);
> +};
> +
> +struct meson_secure_pwrc_domain_data {
> +	unsigned int count;
> +	struct meson_secure_pwrc_domain_desc *domains;
> +};
> +
> +static bool pwrc_secure_get_power(struct meson_secure_pwrc_domain *pwrc_domain)
> +{
> +	struct arm_smccc_res res;
> +
> +	arm_smccc_smc(SMC_PWRC_GET, pwrc_domain->index, 0,
> +		      0, 0, 0, 0, 0, &res);
> +
> +	return res.a0 & 0x1;

Please use a #define with a readable name for this mask.

> +}

What does the return value for this function mean?  Does true mean
"powered off" or "powered on"?

See the rename I just did on the ee-pwrc driver:
https://lore.kernel.org/linux-amlogic/20190925213528.21515-2-khilman@kernel.org/

> +static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
> +{
> +	struct arm_smccc_res res;
> +	struct meson_secure_pwrc_domain *pwrc_domain =
> +		container_of(domain, struct meson_secure_pwrc_domain, base);
> +
> +	arm_smccc_smc(SMC_PWRC_SET, pwrc_domain->index, PWRC_OFF,
> +		      0, 0, 0, 0, 0, &res);
> +
> +	return 0;
> +}
> +
> +static int meson_secure_pwrc_on(struct generic_pm_domain *domain)
> +{
> +	struct arm_smccc_res res;
> +	struct meson_secure_pwrc_domain *pwrc_domain =
> +		container_of(domain, struct meson_secure_pwrc_domain, base);
> +
> +	arm_smccc_smc(SMC_PWRC_SET, pwrc_domain->index, PWRC_ON,
> +		      0, 0, 0, 0, 0, &res);
> +
> +	return 0;
> +}
> +
> +#define SEC_PD(__name, __flag)			\
> +{						\
> +	.name = #__name,			\
> +	.index = PWRC_##__name##_ID,		\
> +	.get_power = pwrc_secure_get_power,	\
> +	.flags = __flag,			\
> +}
> +
> +static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
> +	SEC_PD(DSPA,	0),
> +	SEC_PD(DSPB,	0),
> +	SEC_PD(UART,	GENPD_FLAG_ALWAYS_ON),

This flag should only be used for domains where there are no linux
drivers.

Rather than using this flag, you need to add a 'power-domain' property
to the uart driver in DT, and then update the meson_uart driver to use
the runtime PM API so that the domain is enabled whenever the UART is in
use.

> +	SEC_PD(DMC,	GENPD_FLAG_ALWAYS_ON),

Please explain the need for ALWAYS_ON.

> +	SEC_PD(I2C,	0),
> +	SEC_PD(PSRAM,	0),
> +	SEC_PD(ACODEC,	0),
> +	SEC_PD(AUDIO,	0),
> +	SEC_PD(OTP,	0),
> +	SEC_PD(DMA,	0),
> +	SEC_PD(SD_EMMC,	0),
> +	SEC_PD(RAMA,	0),
> +	SEC_PD(RAMB,	GENPD_FLAG_ALWAYS_ON),

Please explain the need for ALWAYS_ON.

> +	SEC_PD(IR,	0),
> +	SEC_PD(SPICC,	0),
> +	SEC_PD(SPIFC,	0),
> +	SEC_PD(USB,	0),
> +	SEC_PD(NIC,	GENPD_FLAG_ALWAYS_ON),

Please explain the need for ALWAYS_ON.

> +	SEC_PD(PDMIN,	0),
> +	SEC_PD(RSA,	0),
> +};
> +
> +static int meson_secure_pwrc_probe(struct platform_device *pdev)
> +{
> +	const struct meson_secure_pwrc_domain_data *match;
> +	struct meson_secure_pwrc *pwrc;
> +	int i;
> +
> +	match = of_device_get_match_data(&pdev->dev);
> +	if (!match) {
> +		dev_err(&pdev->dev, "failed to get match data\n");
> +		return -ENODEV;
> +	}
> +
> +	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> +	if (!pwrc)
> +		return -ENOMEM;
> +
> +	pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
> +					   sizeof(*pwrc->xlate.domains),
> +					   GFP_KERNEL);
> +	if (!pwrc->xlate.domains)
> +		return -ENOMEM;
> +
> +	pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
> +				     sizeof(*pwrc->domains), GFP_KERNEL);
> +	if (!pwrc->domains)
> +		return -ENOMEM;
> +
> +	pwrc->xlate.num_domains = match->count;
> +	platform_set_drvdata(pdev, pwrc);
> +
> +	for (i = 0 ; i < match->count ; ++i) {
> +		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
> +
> +		if (!match->domains[i].index)
> +			continue;
> +
> +		dom->index = match->domains[i].index;
> +		dom->base.name = match->domains[i].name;
> +		dom->base.flags = match->domains[i].flags;
> +		dom->base.power_on = meson_secure_pwrc_on;
> +		dom->base.power_off = meson_secure_pwrc_off;
> +
> +		pm_genpd_init(&dom->base, NULL,
> +			      (match->domains[i].get_power ?
> +			      match->domains[i].get_power(dom) : true));
> +
> +		pwrc->xlate.domains[i] = &dom->base;
> +	}
> +
> +	return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
> +}
> +
> +static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
> +	.domains = a1_pwrc_domains,
> +	.count = ARRAY_SIZE(a1_pwrc_domains),
> +};
> +
> +static const struct of_device_id meson_secure_pwrc_match_table[] = {
> +	{
> +		.compatible = "amlogic,meson-a1-pwrc",
> +		.data = &meson_secure_a1_pwrc_data,
> +	},
> +	{ }

as mentioned by Martin, please add the sentinel string here.  Helps for
readability.

> +};
> +
> +static struct platform_driver meson_secure_pwrc_driver = {
> +	.probe = meson_secure_pwrc_probe,
> +	.driver = {
> +		.name		= "meson_secure_pwrc",
> +		.of_match_table	= meson_secure_pwrc_match_table,
> +	},
> +};
> +
> +static int meson_secure_pwrc_init(void)
> +{
> +	return platform_driver_register(&meson_secure_pwrc_driver);
> +}
> +arch_initcall_sync(meson_secure_pwrc_init);

Please use builtin_platform_driver() or explain in detail why the
initcall is needed.

Thanks,

Kevin
Jianxin Pan Sept. 26, 2019, 9:17 a.m. UTC | #4
Hi Kevin,

Thanks for your review. Please see my comments below.


On 2019/9/26 6:41, Kevin Hilman wrote:
> Hi Jianxin,
> 
> Jianxin Pan <jianxin.pan@amlogic.com> writes:
> 
>> Add support for the Amlogic Secure Power controller. In A1/C1 series, power
>> control registers are in secure domain, and should be accessed by smc.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>> Signed-off-by: Zhiqiang Liang <zhiqiang.liang@amlogic.com>
> 
> Thanks for the new power domain driver.
> 
>> ---
>>  drivers/soc/amlogic/Kconfig             |  13 +++
>>  drivers/soc/amlogic/Makefile            |   1 +
>>  drivers/soc/amlogic/meson-secure-pwrc.c | 182 ++++++++++++++++++++++++++++++++
>>  3 files changed, 196 insertions(+)
>>  create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c
>>
>> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
>> index bc2c912..6cb06e7 100644
>> --- a/drivers/soc/amlogic/Kconfig
>> +++ b/drivers/soc/amlogic/Kconfig
>> @@ -48,6 +48,19 @@ config MESON_EE_PM_DOMAINS
>>  	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
>>  	  Generic Power Domains.
>>  
>> +config MESON_SECURE_PM_DOMAINS
>> +	bool "Amlogic Meson Secure Power Domains driver"
>> +	depends on ARCH_MESON || COMPILE_TEST
>> +	depends on PM && OF
>> +	depends on HAVE_ARM_SMCCC
>> +	default ARCH_MESON
>> +	select PM_GENERIC_DOMAINS
>> +	select PM_GENERIC_DOMAINS_OF
>> +	help
>> +	  Support for the power controller on Amlogic A1/C1 series.
>> +	  Say yes to expose Amlogic Meson Secure Power Domains as Generic
>> +	  Power Domains.
>> +
>>  config MESON_MX_SOCINFO
>>  	bool "Amlogic Meson MX SoC Information driver"
>>  	depends on ARCH_MESON || COMPILE_TEST
>> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
>> index de79d044..7b8c5d3 100644
>> --- a/drivers/soc/amlogic/Makefile
>> +++ b/drivers/soc/amlogic/Makefile
>> @@ -5,3 +5,4 @@ obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
>>  obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
>>  obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
>>  obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
>> +obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
>> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
>> new file mode 100644
>> index 00000000..00c7232
>> --- /dev/null
>> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
>> @@ -0,0 +1,182 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
[...]
>> +
>> +static bool pwrc_secure_get_power(struct meson_secure_pwrc_domain *pwrc_domain)
>> +{
>> +	struct arm_smccc_res res;
>> +
>> +	arm_smccc_smc(SMC_PWRC_GET, pwrc_domain->index, 0,
>> +		      0, 0, 0, 0, 0, &res);
>> +
>> +	return res.a0 & 0x1;
> 
> Please use a #define with a readable name for this mask.
> The return type of this smc is bool. I will remove 0x1 mask in next version. 

Another question about smc:
In this driver, no share memory is needed, and I use arm_smccc_smc() directly.
Should I add secure-monitor = <&sm> in dtb and use meson_sm_call() from sm driver instead? 
>> +}
> 
> What does the return value for this function mean?  Does true mean
> "powered off" or "powered on">
The return vaule for SMC_PWRC_GET :
0 -> power on
1 -> power off> See the rename I just did on the ee-pwrc driver:
> https://lore.kernel.org/linux-amlogic/20190925213528.21515-2-khilman@kernel.org/
> I will follow and rename to _is_off() in the next verson.
>> +static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
>> +{
>> +	struct arm_smccc_res res;
>> +	struct meson_secure_pwrc_domain *pwrc_domain =
[...]
>> +
>> +#define SEC_PD(__name, __flag)			\
>> +{						\
>> +	.name = #__name,			\
>> +	.index = PWRC_##__name##_ID,		\
>> +	.get_power = pwrc_secure_get_power,	\
>> +	.flags = __flag,			\
>> +}
>> +
>> +static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>> +	SEC_PD(DSPA,	0),
>> +	SEC_PD(DSPB,	0),
>> +	SEC_PD(UART,	GENPD_FLAG_ALWAYS_ON),
> 
> This flag should only be used for domains where there are no linux
> drivers.
> 
> Rather than using this flag, you need to add a 'power-domain' property
> to the uart driver in DT, and then update the meson_uart driver to use
> the runtime PM API so that the domain is enabled whenever the UART is in
> use.
PM_UART Power domain is shared by uart, msr, jtag and cec.
Uart should keep working in BL31, after kernel suspend and before kernel resume.
> 
>> +	SEC_PD(DMC,	GENPD_FLAG_ALWAYS_ON),
> 
> Please explain the need for ALWAYS_ON.
> 
PM_DMC is used for DDR PHY ana/dig and DMC. 
There is no linux drver for them, and it should be always on. 

I will add comments for all these always on domains.
>> +	SEC_PD(I2C,	0),
>> +	SEC_PD(PSRAM,	0),
>> +	SEC_PD(ACODEC,	0),
>> +	SEC_PD(AUDIO,	0),
>> +	SEC_PD(OTP,	0),
>> +	SEC_PD(DMA,	0),
>> +	SEC_PD(SD_EMMC,	0),
>> +	SEC_PD(RAMA,	0),
>> +	SEC_PD(RAMB,	GENPD_FLAG_ALWAYS_ON),
> 
> Please explain the need for ALWAYS_ON.
> 
In A1, SRAMB is used for bl31 ATF. 
>> +	SEC_PD(IR,	0),
>> +	SEC_PD(SPICC,	0),
>> +	SEC_PD(SPIFC,	0),
>> +	SEC_PD(USB,	0),
>> +	SEC_PD(NIC,	GENPD_FLAG_ALWAYS_ON),
> 
> Please explain the need for ALWAYS_ON.
> 
PD_NIC is used for NIC400, and should keep on.
>> +	SEC_PD(PDMIN,	0),
>> +	SEC_PD(RSA,	0),
>> +};
>> +
>> +static int meson_secure_pwrc_probe(struct platform_device *pdev)
>> +{
>> +	const struct meson_secure_pwrc_domain_data *match;
>> +	struct meson_secure_pwrc *pwrc;
>> +	int i;
[...]
>> +
>> +	return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
>> +}
>> +
>> +static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
>> +	.domains = a1_pwrc_domains,
>> +	.count = ARRAY_SIZE(a1_pwrc_domains),
>> +};
>> +
>> +static const struct of_device_id meson_secure_pwrc_match_table[] = {
>> +	{
>> +		.compatible = "amlogic,meson-a1-pwrc",
>> +		.data = &meson_secure_a1_pwrc_data,
>> +	},
>> +	{ }
> 
> as mentioned by Martin, please add the sentinel string here.  Helps for
> readability.
> 
OK, I will fix it. Thank you.
>> +};
>> +
>> +static struct platform_driver meson_secure_pwrc_driver = {
>> +	.probe = meson_secure_pwrc_probe,
>> +	.driver = {
>> +		.name		= "meson_secure_pwrc",
>> +		.of_match_table	= meson_secure_pwrc_match_table,
>> +	},
>> +};
>> +
>> +static int meson_secure_pwrc_init(void)
>> +{
>> +	return platform_driver_register(&meson_secure_pwrc_driver);
>> +}
>> +arch_initcall_sync(meson_secure_pwrc_init);
> 
> Please use builtin_platform_driver() or explain in detail why the
> initcall is needed.
> 
OK, I will use builtin_platform_driver instead.
> Thanks,
> 
> Kevin
> 
> .
>
Kevin Hilman Sept. 26, 2019, 4:23 p.m. UTC | #5
Jianxin Pan <jianxin.pan@amlogic.com> writes:

> Hi Kevin,
>
> Thanks for your review. Please see my comments below.
>
>
> On 2019/9/26 6:41, Kevin Hilman wrote:
>> Hi Jianxin,
>> 
>> Jianxin Pan <jianxin.pan@amlogic.com> writes:
>> 
>>> Add support for the Amlogic Secure Power controller. In A1/C1 series, power
>>> control registers are in secure domain, and should be accessed by smc.
>>>
>>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>>> Signed-off-by: Zhiqiang Liang <zhiqiang.liang@amlogic.com>
>> 
>> Thanks for the new power domain driver.
>> 
>>> ---
>>>  drivers/soc/amlogic/Kconfig             |  13 +++
>>>  drivers/soc/amlogic/Makefile            |   1 +
>>>  drivers/soc/amlogic/meson-secure-pwrc.c | 182 ++++++++++++++++++++++++++++++++
>>>  3 files changed, 196 insertions(+)
>>>  create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c
>>>
>>> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
>>> index bc2c912..6cb06e7 100644
>>> --- a/drivers/soc/amlogic/Kconfig
>>> +++ b/drivers/soc/amlogic/Kconfig
>>> @@ -48,6 +48,19 @@ config MESON_EE_PM_DOMAINS
>>>  	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
>>>  	  Generic Power Domains.
>>>  
>>> +config MESON_SECURE_PM_DOMAINS
>>> +	bool "Amlogic Meson Secure Power Domains driver"
>>> +	depends on ARCH_MESON || COMPILE_TEST
>>> +	depends on PM && OF
>>> +	depends on HAVE_ARM_SMCCC
>>> +	default ARCH_MESON
>>> +	select PM_GENERIC_DOMAINS
>>> +	select PM_GENERIC_DOMAINS_OF
>>> +	help
>>> +	  Support for the power controller on Amlogic A1/C1 series.
>>> +	  Say yes to expose Amlogic Meson Secure Power Domains as Generic
>>> +	  Power Domains.
>>> +
>>>  config MESON_MX_SOCINFO
>>>  	bool "Amlogic Meson MX SoC Information driver"
>>>  	depends on ARCH_MESON || COMPILE_TEST
>>> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
>>> index de79d044..7b8c5d3 100644
>>> --- a/drivers/soc/amlogic/Makefile
>>> +++ b/drivers/soc/amlogic/Makefile
>>> @@ -5,3 +5,4 @@ obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
>>>  obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
>>>  obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
>>>  obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
>>> +obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
>>> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
>>> new file mode 100644
>>> index 00000000..00c7232
>>> --- /dev/null
>>> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
>>> @@ -0,0 +1,182 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> [...]
>>> +
>>> +static bool pwrc_secure_get_power(struct meson_secure_pwrc_domain *pwrc_domain)
>>> +{
>>> +	struct arm_smccc_res res;
>>> +
>>> +	arm_smccc_smc(SMC_PWRC_GET, pwrc_domain->index, 0,
>>> +		      0, 0, 0, 0, 0, &res);
>>> +
>>> +	return res.a0 & 0x1;
>> 
>> Please use a #define with a readable name for this mask.
>> The return type of this smc is bool. I will remove 0x1 mask in next version. 
>
> Another question about smc:
> In this driver, no share memory is needed, and I use arm_smccc_smc() directly.
> Should I add secure-monitor = <&sm> in dtb and use meson_sm_call() from sm driver instead? 

Yes, that would be preferred.

>>> +}
>> 
>> What does the return value for this function mean?  Does true mean
>> "powered off" or "powered on">
> The return vaule for SMC_PWRC_GET :
> 0 -> power on
> 1 -> power off> See the rename I just did on the ee-pwrc driver:
>> https://lore.kernel.org/linux-amlogic/20190925213528.21515-2-khilman@kernel.org/
>> I will follow and rename to _is_off() in the next verson.
>>> +static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
>>> +{
>>> +	struct arm_smccc_res res;
>>> +	struct meson_secure_pwrc_domain *pwrc_domain =
> [...]
>>> +
>>> +#define SEC_PD(__name, __flag)			\
>>> +{						\
>>> +	.name = #__name,			\
>>> +	.index = PWRC_##__name##_ID,		\
>>> +	.get_power = pwrc_secure_get_power,	\
>>> +	.flags = __flag,			\
>>> +}
>>> +
>>> +static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>>> +	SEC_PD(DSPA,	0),
>>> +	SEC_PD(DSPB,	0),
>>> +	SEC_PD(UART,	GENPD_FLAG_ALWAYS_ON),
>> 
>> This flag should only be used for domains where there are no linux
>> drivers.
>> 
>> Rather than using this flag, you need to add a 'power-domain' property
>> to the uart driver in DT, and then update the meson_uart driver to use
>> the runtime PM API so that the domain is enabled whenever the UART is in
>> use.
>
> PM_UART Power domain is shared by uart, msr, jtag and cec.
> Uart should keep working in BL31, after kernel suspend and before kernel resume.

OK.

>> 
>>> +	SEC_PD(DMC,	GENPD_FLAG_ALWAYS_ON),
>> 
>> Please explain the need for ALWAYS_ON.
>> 
> PM_DMC is used for DDR PHY ana/dig and DMC. 
> There is no linux drver for them, and it should be always on. 
>
> I will add comments for all these always on domains.

OK, thank you.


Kevin
diff mbox series

Patch

diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
index bc2c912..6cb06e7 100644
--- a/drivers/soc/amlogic/Kconfig
+++ b/drivers/soc/amlogic/Kconfig
@@ -48,6 +48,19 @@  config MESON_EE_PM_DOMAINS
 	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
 	  Generic Power Domains.
 
+config MESON_SECURE_PM_DOMAINS
+	bool "Amlogic Meson Secure Power Domains driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on PM && OF
+	depends on HAVE_ARM_SMCCC
+	default ARCH_MESON
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  Support for the power controller on Amlogic A1/C1 series.
+	  Say yes to expose Amlogic Meson Secure Power Domains as Generic
+	  Power Domains.
+
 config MESON_MX_SOCINFO
 	bool "Amlogic Meson MX SoC Information driver"
 	depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
index de79d044..7b8c5d3 100644
--- a/drivers/soc/amlogic/Makefile
+++ b/drivers/soc/amlogic/Makefile
@@ -5,3 +5,4 @@  obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
 obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
 obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
 obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
+obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
new file mode 100644
index 00000000..00c7232
--- /dev/null
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -0,0 +1,182 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc.
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/power/meson-a1-power.h>
+#include <linux/arm-smccc.h>
+
+#define PWRC_ON		1
+#define PWRC_OFF	0
+#define SMC_PWRC_SET	0x82000093
+#define SMC_PWRC_GET	0x82000095
+
+struct meson_secure_pwrc_domain {
+	struct generic_pm_domain base;
+	unsigned int index;
+};
+
+struct meson_secure_pwrc {
+	struct meson_secure_pwrc_domain *domains;
+	struct genpd_onecell_data xlate;
+};
+
+struct meson_secure_pwrc_domain_desc {
+	unsigned int index;
+	unsigned int flags;
+	char *name;
+	bool (*get_power)(struct meson_secure_pwrc_domain *pwrc_domain);
+};
+
+struct meson_secure_pwrc_domain_data {
+	unsigned int count;
+	struct meson_secure_pwrc_domain_desc *domains;
+};
+
+static bool pwrc_secure_get_power(struct meson_secure_pwrc_domain *pwrc_domain)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(SMC_PWRC_GET, pwrc_domain->index, 0,
+		      0, 0, 0, 0, 0, &res);
+
+	return res.a0 & 0x1;
+}
+
+static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
+{
+	struct arm_smccc_res res;
+	struct meson_secure_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_secure_pwrc_domain, base);
+
+	arm_smccc_smc(SMC_PWRC_SET, pwrc_domain->index, PWRC_OFF,
+		      0, 0, 0, 0, 0, &res);
+
+	return 0;
+}
+
+static int meson_secure_pwrc_on(struct generic_pm_domain *domain)
+{
+	struct arm_smccc_res res;
+	struct meson_secure_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_secure_pwrc_domain, base);
+
+	arm_smccc_smc(SMC_PWRC_SET, pwrc_domain->index, PWRC_ON,
+		      0, 0, 0, 0, 0, &res);
+
+	return 0;
+}
+
+#define SEC_PD(__name, __flag)			\
+{						\
+	.name = #__name,			\
+	.index = PWRC_##__name##_ID,		\
+	.get_power = pwrc_secure_get_power,	\
+	.flags = __flag,			\
+}
+
+static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
+	SEC_PD(DSPA,	0),
+	SEC_PD(DSPB,	0),
+	SEC_PD(UART,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(DMC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(I2C,	0),
+	SEC_PD(PSRAM,	0),
+	SEC_PD(ACODEC,	0),
+	SEC_PD(AUDIO,	0),
+	SEC_PD(OTP,	0),
+	SEC_PD(DMA,	0),
+	SEC_PD(SD_EMMC,	0),
+	SEC_PD(RAMA,	0),
+	SEC_PD(RAMB,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(IR,	0),
+	SEC_PD(SPICC,	0),
+	SEC_PD(SPIFC,	0),
+	SEC_PD(USB,	0),
+	SEC_PD(NIC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(PDMIN,	0),
+	SEC_PD(RSA,	0),
+};
+
+static int meson_secure_pwrc_probe(struct platform_device *pdev)
+{
+	const struct meson_secure_pwrc_domain_data *match;
+	struct meson_secure_pwrc *pwrc;
+	int i;
+
+	match = of_device_get_match_data(&pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
+					   sizeof(*pwrc->xlate.domains),
+					   GFP_KERNEL);
+	if (!pwrc->xlate.domains)
+		return -ENOMEM;
+
+	pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
+				     sizeof(*pwrc->domains), GFP_KERNEL);
+	if (!pwrc->domains)
+		return -ENOMEM;
+
+	pwrc->xlate.num_domains = match->count;
+	platform_set_drvdata(pdev, pwrc);
+
+	for (i = 0 ; i < match->count ; ++i) {
+		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
+
+		if (!match->domains[i].index)
+			continue;
+
+		dom->index = match->domains[i].index;
+		dom->base.name = match->domains[i].name;
+		dom->base.flags = match->domains[i].flags;
+		dom->base.power_on = meson_secure_pwrc_on;
+		dom->base.power_off = meson_secure_pwrc_off;
+
+		pm_genpd_init(&dom->base, NULL,
+			      (match->domains[i].get_power ?
+			      match->domains[i].get_power(dom) : true));
+
+		pwrc->xlate.domains[i] = &dom->base;
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
+}
+
+static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
+	.domains = a1_pwrc_domains,
+	.count = ARRAY_SIZE(a1_pwrc_domains),
+};
+
+static const struct of_device_id meson_secure_pwrc_match_table[] = {
+	{
+		.compatible = "amlogic,meson-a1-pwrc",
+		.data = &meson_secure_a1_pwrc_data,
+	},
+	{ }
+};
+
+static struct platform_driver meson_secure_pwrc_driver = {
+	.probe = meson_secure_pwrc_probe,
+	.driver = {
+		.name		= "meson_secure_pwrc",
+		.of_match_table	= meson_secure_pwrc_match_table,
+	},
+};
+
+static int meson_secure_pwrc_init(void)
+{
+	return platform_driver_register(&meson_secure_pwrc_driver);
+}
+arch_initcall_sync(meson_secure_pwrc_init);