diff mbox series

iio: adc: stm32-adc: fix kernel-doc warnings

Message ID 1568980206-5428-1-git-send-email-fabrice.gasnier@st.com (mailing list archive)
State New, archived
Headers show
Series iio: adc: stm32-adc: fix kernel-doc warnings | expand

Commit Message

Fabrice Gasnier Sept. 20, 2019, 11:50 a.m. UTC
Fix the following warnings when documentation is built:
drivers/iio/adc/stm32-adc-core.c:62: warning: cannot understand function
 prototype: 'struct stm32_adc_common_regs '
drivers/iio/adc/stm32-adc-core.c:78: warning: cannot understand function
 prototype: 'struct stm32_adc_priv_cfg '
drivers/iio/adc/stm32-adc-core.c:123: warning: Function parameter or
 member 'pdev' not described in 'stm32f4_adc_clk_sel'
drivers/iio/adc/stm32-adc.c:219: warning: cannot understand function
 prototype: 'struct stm32_adc_regs '
drivers/iio/adc/stm32-adc.c:237: warning: cannot understand function
 prototype: 'struct stm32_adc_regspec '
drivers/iio/adc/stm32-adc.c:264: warning: cannot understand function
 prototype: 'struct stm32_adc_cfg '
drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
 'difsel' not described in 'N'
drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
 'pcsel' not described in 'stm32_adc'
drivers/iio/adc/stm32-adc.c:371: warning: cannot understand function
 prototype: 'const struct stm32_adc_regs stm32f4_sq[STM32_ADC_MAX_SQ + 1]
drivers/iio/adc/stm32-adc.c:417: warning: cannot understand function
 prototype: 'const struct stm32_adc_regs stm32f4_smp_bits[] = '
drivers/iio/adc/stm32-adc.c:508: warning: cannot understand function
 prototype: 'const struct stm32_adc_regs stm32h7_smp_bits[] = '
drivers/iio/adc/stm32-adc.c:1112: warning: Function parameter or member
 'indio_dev' not described in 'stm32_adc_get_trig_extsel'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
 'indio_dev' not described in 'stm32_adc_debugfs_reg_access'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
 'reg' not described in 'stm32_adc_debugfs_reg_access'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
 'writeval' not described in 'stm32_adc_debugfs_reg_access'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
 'readval' not described in 'stm32_adc_debugfs_reg_access'

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
Note: this applies on top of "iio: adc: stm32-adc: fix a race when using
several adcs with dma and irq"
---
 drivers/iio/adc/stm32-adc-core.c | 11 ++++++-----
 drivers/iio/adc/stm32-adc.c      | 21 +++++++++++++--------
 2 files changed, 19 insertions(+), 13 deletions(-)

Comments

Jonathan Cameron Sept. 21, 2019, 6:03 p.m. UTC | #1
On Fri, 20 Sep 2019 13:50:06 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Fix the following warnings when documentation is built:
> drivers/iio/adc/stm32-adc-core.c:62: warning: cannot understand function
>  prototype: 'struct stm32_adc_common_regs '
> drivers/iio/adc/stm32-adc-core.c:78: warning: cannot understand function
>  prototype: 'struct stm32_adc_priv_cfg '
> drivers/iio/adc/stm32-adc-core.c:123: warning: Function parameter or
>  member 'pdev' not described in 'stm32f4_adc_clk_sel'
> drivers/iio/adc/stm32-adc.c:219: warning: cannot understand function
>  prototype: 'struct stm32_adc_regs '
> drivers/iio/adc/stm32-adc.c:237: warning: cannot understand function
>  prototype: 'struct stm32_adc_regspec '
> drivers/iio/adc/stm32-adc.c:264: warning: cannot understand function
>  prototype: 'struct stm32_adc_cfg '
> drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
>  'difsel' not described in 'N'
> drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
>  'pcsel' not described in 'stm32_adc'
> drivers/iio/adc/stm32-adc.c:371: warning: cannot understand function
>  prototype: 'const struct stm32_adc_regs stm32f4_sq[STM32_ADC_MAX_SQ + 1]
> drivers/iio/adc/stm32-adc.c:417: warning: cannot understand function
>  prototype: 'const struct stm32_adc_regs stm32f4_smp_bits[] = '
> drivers/iio/adc/stm32-adc.c:508: warning: cannot understand function
>  prototype: 'const struct stm32_adc_regs stm32h7_smp_bits[] = '
> drivers/iio/adc/stm32-adc.c:1112: warning: Function parameter or member
>  'indio_dev' not described in 'stm32_adc_get_trig_extsel'
> drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
>  'indio_dev' not described in 'stm32_adc_debugfs_reg_access'
> drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
>  'reg' not described in 'stm32_adc_debugfs_reg_access'
> drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
>  'writeval' not described in 'stm32_adc_debugfs_reg_access'
> drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
>  'readval' not described in 'stm32_adc_debugfs_reg_access'
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>

As I don't think we build these particular docs by default, I'm not going
to take this as a fix.  Hence it'll have to wait for the below to be
upstream of my togreg branch.

Give me a poke if that's true and I seem to have missed it.

Thanks,

Jonathan

> ---
> Note: this applies on top of "iio: adc: stm32-adc: fix a race when using
> several adcs with dma and irq"
> ---
>  drivers/iio/adc/stm32-adc-core.c | 11 ++++++-----
>  drivers/iio/adc/stm32-adc.c      | 21 +++++++++++++--------
>  2 files changed, 19 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> index 93a096a..20c626c 100644
> --- a/drivers/iio/adc/stm32-adc-core.c
> +++ b/drivers/iio/adc/stm32-adc-core.c
> @@ -38,12 +38,12 @@
>  #define HAS_ANASWVDD		BIT(1)
>  
>  /**
> - * stm32_adc_common_regs - stm32 common registers, compatible dependent data
> + * struct stm32_adc_common_regs - stm32 common registers
>   * @csr:	common status register offset
>   * @ccr:	common control register offset
> - * @eoc1:	adc1 end of conversion flag in @csr
> - * @eoc2:	adc2 end of conversion flag in @csr
> - * @eoc3:	adc3 end of conversion flag in @csr
> + * @eoc1_msk:	adc1 end of conversion flag in @csr
> + * @eoc2_msk:	adc2 end of conversion flag in @csr
> + * @eoc3_msk:	adc3 end of conversion flag in @csr
>   * @ier:	interrupt enable register offset for each adc
>   * @eocie_msk:	end of conversion interrupt enable mask in @ier
>   */
> @@ -60,7 +60,7 @@ struct stm32_adc_common_regs {
>  struct stm32_adc_priv;
>  
>  /**
> - * stm32_adc_priv_cfg - stm32 core compatible configuration data
> + * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
>   * @regs:	common registers for all instances
>   * @clk_sel:	clock selection routine
>   * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
> @@ -117,6 +117,7 @@ static int stm32f4_pclk_div[] = {2, 4, 6, 8};
>  
>  /**
>   * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
> + * @pdev: platform device
>   * @priv: stm32 ADC core private data
>   * Select clock prescaler used for analog conversions, before using ADC.
>   */
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 663f8a5..76a247b 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -102,7 +102,7 @@ struct stm32_adc_calib {
>  };
>  
>  /**
> - * stm32_adc_regs - stm32 ADC misc registers & bitfield desc
> + * struct stm32_adc_regs - stm32 ADC misc registers & bitfield desc
>   * @reg:		register offset
>   * @mask:		bitfield mask
>   * @shift:		left shift
> @@ -114,7 +114,7 @@ struct stm32_adc_regs {
>  };
>  
>  /**
> - * stm32_adc_regspec - stm32 registers definition, compatible dependent data
> + * struct stm32_adc_regspec - stm32 registers definition
>   * @dr:			data register offset
>   * @ier_eoc:		interrupt enable register & eocie bitfield
>   * @isr_eoc:		interrupt status register & eoc bitfield
> @@ -140,7 +140,7 @@ struct stm32_adc_regspec {
>  struct stm32_adc;
>  
>  /**
> - * stm32_adc_cfg - stm32 compatible configuration data
> + * struct stm32_adc_cfg - stm32 compatible configuration data
>   * @regs:		registers descriptions
>   * @adc_info:		per instance input channels definitions
>   * @trigs:		external trigger sources
> @@ -183,8 +183,8 @@ struct stm32_adc_cfg {
>   * @rx_buf:		dma rx buffer cpu address
>   * @rx_dma_buf:		dma rx buffer bus address
>   * @rx_buf_sz:		dma rx buffer size
> - * @difsel		bitmask to set single-ended/differential channel
> - * @pcsel		bitmask to preselect channels on some devices
> + * @difsel:		bitmask to set single-ended/differential channel
> + * @pcsel:		bitmask to preselect channels on some devices
>   * @smpr_val:		sampling time settings (e.g. smpr1 / smpr2)
>   * @cal:		optional calibration data on some devices
>   * @chan_name:		channel name array
> @@ -254,7 +254,7 @@ static const struct stm32_adc_info stm32h7_adc_info = {
>  	.num_res = ARRAY_SIZE(stm32h7_adc_resolutions),
>  };
>  
> -/**
> +/*
>   * stm32f4_sq - describe regular sequence registers
>   * - L: sequence len (register & bit field)
>   * - SQ1..SQ16: sequence entries (register & bit field)
> @@ -301,7 +301,7 @@ static struct stm32_adc_trig_info stm32f4_adc_trigs[] = {
>  	{}, /* sentinel */
>  };
>  
> -/**
> +/*
>   * stm32f4_smp_bits[] - describe sampling time register index & bit fields
>   * Sorted so it can be indexed by channel number.
>   */
> @@ -392,7 +392,7 @@ static struct stm32_adc_trig_info stm32h7_adc_trigs[] = {
>  	{},
>  };
>  
> -/**
> +/*
>   * stm32h7_smp_bits - describe sampling time register index & bit fields
>   * Sorted so it can be indexed by channel number.
>   */
> @@ -994,6 +994,7 @@ static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev,
>  
>  /**
>   * stm32_adc_get_trig_extsel() - Get external trigger selection
> + * @indio_dev: IIO device structure
>   * @trig: trigger
>   *
>   * Returns trigger extsel value, if trig matches, -EINVAL otherwise.
> @@ -1297,6 +1298,10 @@ static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
>  
>  /**
>   * stm32_adc_debugfs_reg_access - read or write register value
> + * @indio_dev: IIO device structure
> + * @reg: register offset
> + * @writeval: value to write
> + * @readval: value to read
>   *
>   * To read a value from an ADC register:
>   *   echo [ADC reg offset] > direct_reg_access
Jonathan Cameron Oct. 22, 2019, 11:56 a.m. UTC | #2
On Sat, 21 Sep 2019 19:03:57 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Fri, 20 Sep 2019 13:50:06 +0200
> Fabrice Gasnier <fabrice.gasnier@st.com> wrote:
> 
> > Fix the following warnings when documentation is built:
> > drivers/iio/adc/stm32-adc-core.c:62: warning: cannot understand function
> >  prototype: 'struct stm32_adc_common_regs '
> > drivers/iio/adc/stm32-adc-core.c:78: warning: cannot understand function
> >  prototype: 'struct stm32_adc_priv_cfg '
> > drivers/iio/adc/stm32-adc-core.c:123: warning: Function parameter or
> >  member 'pdev' not described in 'stm32f4_adc_clk_sel'
> > drivers/iio/adc/stm32-adc.c:219: warning: cannot understand function
> >  prototype: 'struct stm32_adc_regs '
> > drivers/iio/adc/stm32-adc.c:237: warning: cannot understand function
> >  prototype: 'struct stm32_adc_regspec '
> > drivers/iio/adc/stm32-adc.c:264: warning: cannot understand function
> >  prototype: 'struct stm32_adc_cfg '
> > drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
> >  'difsel' not described in 'N'
> > drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
> >  'pcsel' not described in 'stm32_adc'
> > drivers/iio/adc/stm32-adc.c:371: warning: cannot understand function
> >  prototype: 'const struct stm32_adc_regs stm32f4_sq[STM32_ADC_MAX_SQ + 1]
> > drivers/iio/adc/stm32-adc.c:417: warning: cannot understand function
> >  prototype: 'const struct stm32_adc_regs stm32f4_smp_bits[] = '
> > drivers/iio/adc/stm32-adc.c:508: warning: cannot understand function
> >  prototype: 'const struct stm32_adc_regs stm32h7_smp_bits[] = '
> > drivers/iio/adc/stm32-adc.c:1112: warning: Function parameter or member
> >  'indio_dev' not described in 'stm32_adc_get_trig_extsel'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> >  'indio_dev' not described in 'stm32_adc_debugfs_reg_access'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> >  'reg' not described in 'stm32_adc_debugfs_reg_access'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> >  'writeval' not described in 'stm32_adc_debugfs_reg_access'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> >  'readval' not described in 'stm32_adc_debugfs_reg_access'
> > 
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>  
> 
> As I don't think we build these particular docs by default, I'm not going
> to take this as a fix.  Hence it'll have to wait for the below to be
> upstream of my togreg branch.
> 
> Give me a poke if that's true and I seem to have missed it.
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> 
> Thanks,
> 
> Jonathan
> 
> > ---
> > Note: this applies on top of "iio: adc: stm32-adc: fix a race when using
> > several adcs with dma and irq"
> > ---
> >  drivers/iio/adc/stm32-adc-core.c | 11 ++++++-----
> >  drivers/iio/adc/stm32-adc.c      | 21 +++++++++++++--------
> >  2 files changed, 19 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> > index 93a096a..20c626c 100644
> > --- a/drivers/iio/adc/stm32-adc-core.c
> > +++ b/drivers/iio/adc/stm32-adc-core.c
> > @@ -38,12 +38,12 @@
> >  #define HAS_ANASWVDD		BIT(1)
> >  
> >  /**
> > - * stm32_adc_common_regs - stm32 common registers, compatible dependent data
> > + * struct stm32_adc_common_regs - stm32 common registers
> >   * @csr:	common status register offset
> >   * @ccr:	common control register offset
> > - * @eoc1:	adc1 end of conversion flag in @csr
> > - * @eoc2:	adc2 end of conversion flag in @csr
> > - * @eoc3:	adc3 end of conversion flag in @csr
> > + * @eoc1_msk:	adc1 end of conversion flag in @csr
> > + * @eoc2_msk:	adc2 end of conversion flag in @csr
> > + * @eoc3_msk:	adc3 end of conversion flag in @csr
> >   * @ier:	interrupt enable register offset for each adc
> >   * @eocie_msk:	end of conversion interrupt enable mask in @ier
> >   */
> > @@ -60,7 +60,7 @@ struct stm32_adc_common_regs {
> >  struct stm32_adc_priv;
> >  
> >  /**
> > - * stm32_adc_priv_cfg - stm32 core compatible configuration data
> > + * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
> >   * @regs:	common registers for all instances
> >   * @clk_sel:	clock selection routine
> >   * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
> > @@ -117,6 +117,7 @@ static int stm32f4_pclk_div[] = {2, 4, 6, 8};
> >  
> >  /**
> >   * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
> > + * @pdev: platform device
> >   * @priv: stm32 ADC core private data
> >   * Select clock prescaler used for analog conversions, before using ADC.
> >   */
> > diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> > index 663f8a5..76a247b 100644
> > --- a/drivers/iio/adc/stm32-adc.c
> > +++ b/drivers/iio/adc/stm32-adc.c
> > @@ -102,7 +102,7 @@ struct stm32_adc_calib {
> >  };
> >  
> >  /**
> > - * stm32_adc_regs - stm32 ADC misc registers & bitfield desc
> > + * struct stm32_adc_regs - stm32 ADC misc registers & bitfield desc
> >   * @reg:		register offset
> >   * @mask:		bitfield mask
> >   * @shift:		left shift
> > @@ -114,7 +114,7 @@ struct stm32_adc_regs {
> >  };
> >  
> >  /**
> > - * stm32_adc_regspec - stm32 registers definition, compatible dependent data
> > + * struct stm32_adc_regspec - stm32 registers definition
> >   * @dr:			data register offset
> >   * @ier_eoc:		interrupt enable register & eocie bitfield
> >   * @isr_eoc:		interrupt status register & eoc bitfield
> > @@ -140,7 +140,7 @@ struct stm32_adc_regspec {
> >  struct stm32_adc;
> >  
> >  /**
> > - * stm32_adc_cfg - stm32 compatible configuration data
> > + * struct stm32_adc_cfg - stm32 compatible configuration data
> >   * @regs:		registers descriptions
> >   * @adc_info:		per instance input channels definitions
> >   * @trigs:		external trigger sources
> > @@ -183,8 +183,8 @@ struct stm32_adc_cfg {
> >   * @rx_buf:		dma rx buffer cpu address
> >   * @rx_dma_buf:		dma rx buffer bus address
> >   * @rx_buf_sz:		dma rx buffer size
> > - * @difsel		bitmask to set single-ended/differential channel
> > - * @pcsel		bitmask to preselect channels on some devices
> > + * @difsel:		bitmask to set single-ended/differential channel
> > + * @pcsel:		bitmask to preselect channels on some devices
> >   * @smpr_val:		sampling time settings (e.g. smpr1 / smpr2)
> >   * @cal:		optional calibration data on some devices
> >   * @chan_name:		channel name array
> > @@ -254,7 +254,7 @@ static const struct stm32_adc_info stm32h7_adc_info = {
> >  	.num_res = ARRAY_SIZE(stm32h7_adc_resolutions),
> >  };
> >  
> > -/**
> > +/*
> >   * stm32f4_sq - describe regular sequence registers
> >   * - L: sequence len (register & bit field)
> >   * - SQ1..SQ16: sequence entries (register & bit field)
> > @@ -301,7 +301,7 @@ static struct stm32_adc_trig_info stm32f4_adc_trigs[] = {
> >  	{}, /* sentinel */
> >  };
> >  
> > -/**
> > +/*
> >   * stm32f4_smp_bits[] - describe sampling time register index & bit fields
> >   * Sorted so it can be indexed by channel number.
> >   */
> > @@ -392,7 +392,7 @@ static struct stm32_adc_trig_info stm32h7_adc_trigs[] = {
> >  	{},
> >  };
> >  
> > -/**
> > +/*
> >   * stm32h7_smp_bits - describe sampling time register index & bit fields
> >   * Sorted so it can be indexed by channel number.
> >   */
> > @@ -994,6 +994,7 @@ static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev,
> >  
> >  /**
> >   * stm32_adc_get_trig_extsel() - Get external trigger selection
> > + * @indio_dev: IIO device structure
> >   * @trig: trigger
> >   *
> >   * Returns trigger extsel value, if trig matches, -EINVAL otherwise.
> > @@ -1297,6 +1298,10 @@ static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
> >  
> >  /**
> >   * stm32_adc_debugfs_reg_access - read or write register value
> > + * @indio_dev: IIO device structure
> > + * @reg: register offset
> > + * @writeval: value to write
> > + * @readval: value to read
> >   *
> >   * To read a value from an ADC register:
> >   *   echo [ADC reg offset] > direct_reg_access  
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 93a096a..20c626c 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -38,12 +38,12 @@ 
 #define HAS_ANASWVDD		BIT(1)
 
 /**
- * stm32_adc_common_regs - stm32 common registers, compatible dependent data
+ * struct stm32_adc_common_regs - stm32 common registers
  * @csr:	common status register offset
  * @ccr:	common control register offset
- * @eoc1:	adc1 end of conversion flag in @csr
- * @eoc2:	adc2 end of conversion flag in @csr
- * @eoc3:	adc3 end of conversion flag in @csr
+ * @eoc1_msk:	adc1 end of conversion flag in @csr
+ * @eoc2_msk:	adc2 end of conversion flag in @csr
+ * @eoc3_msk:	adc3 end of conversion flag in @csr
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
@@ -60,7 +60,7 @@  struct stm32_adc_common_regs {
 struct stm32_adc_priv;
 
 /**
- * stm32_adc_priv_cfg - stm32 core compatible configuration data
+ * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
@@ -117,6 +117,7 @@  static int stm32f4_pclk_div[] = {2, 4, 6, 8};
 
 /**
  * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * @pdev: platform device
  * @priv: stm32 ADC core private data
  * Select clock prescaler used for analog conversions, before using ADC.
  */
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 663f8a5..76a247b 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -102,7 +102,7 @@  struct stm32_adc_calib {
 };
 
 /**
- * stm32_adc_regs - stm32 ADC misc registers & bitfield desc
+ * struct stm32_adc_regs - stm32 ADC misc registers & bitfield desc
  * @reg:		register offset
  * @mask:		bitfield mask
  * @shift:		left shift
@@ -114,7 +114,7 @@  struct stm32_adc_regs {
 };
 
 /**
- * stm32_adc_regspec - stm32 registers definition, compatible dependent data
+ * struct stm32_adc_regspec - stm32 registers definition
  * @dr:			data register offset
  * @ier_eoc:		interrupt enable register & eocie bitfield
  * @isr_eoc:		interrupt status register & eoc bitfield
@@ -140,7 +140,7 @@  struct stm32_adc_regspec {
 struct stm32_adc;
 
 /**
- * stm32_adc_cfg - stm32 compatible configuration data
+ * struct stm32_adc_cfg - stm32 compatible configuration data
  * @regs:		registers descriptions
  * @adc_info:		per instance input channels definitions
  * @trigs:		external trigger sources
@@ -183,8 +183,8 @@  struct stm32_adc_cfg {
  * @rx_buf:		dma rx buffer cpu address
  * @rx_dma_buf:		dma rx buffer bus address
  * @rx_buf_sz:		dma rx buffer size
- * @difsel		bitmask to set single-ended/differential channel
- * @pcsel		bitmask to preselect channels on some devices
+ * @difsel:		bitmask to set single-ended/differential channel
+ * @pcsel:		bitmask to preselect channels on some devices
  * @smpr_val:		sampling time settings (e.g. smpr1 / smpr2)
  * @cal:		optional calibration data on some devices
  * @chan_name:		channel name array
@@ -254,7 +254,7 @@  static const struct stm32_adc_info stm32h7_adc_info = {
 	.num_res = ARRAY_SIZE(stm32h7_adc_resolutions),
 };
 
-/**
+/*
  * stm32f4_sq - describe regular sequence registers
  * - L: sequence len (register & bit field)
  * - SQ1..SQ16: sequence entries (register & bit field)
@@ -301,7 +301,7 @@  static struct stm32_adc_trig_info stm32f4_adc_trigs[] = {
 	{}, /* sentinel */
 };
 
-/**
+/*
  * stm32f4_smp_bits[] - describe sampling time register index & bit fields
  * Sorted so it can be indexed by channel number.
  */
@@ -392,7 +392,7 @@  static struct stm32_adc_trig_info stm32h7_adc_trigs[] = {
 	{},
 };
 
-/**
+/*
  * stm32h7_smp_bits - describe sampling time register index & bit fields
  * Sorted so it can be indexed by channel number.
  */
@@ -994,6 +994,7 @@  static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev,
 
 /**
  * stm32_adc_get_trig_extsel() - Get external trigger selection
+ * @indio_dev: IIO device structure
  * @trig: trigger
  *
  * Returns trigger extsel value, if trig matches, -EINVAL otherwise.
@@ -1297,6 +1298,10 @@  static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
 
 /**
  * stm32_adc_debugfs_reg_access - read or write register value
+ * @indio_dev: IIO device structure
+ * @reg: register offset
+ * @writeval: value to write
+ * @readval: value to read
  *
  * To read a value from an ADC register:
  *   echo [ADC reg offset] > direct_reg_access