[1/2] rename nfit_test_bus with a more generic name
diff mbox series

Message ID 20190923033015.26732-1-santosh@fossix.org
State New
Headers show
Series
  • [1/2] rename nfit_test_bus with a more generic name
Related show

Commit Message

Santosh Sivaraj Sept. 23, 2019, 3:30 a.m. UTC
This cleanup would avoid confusion when ndctl is used for testing
on non-nfit platforms.

Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
---
 test/blk-exhaust.sh             | 14 +++++++-------
 test/btt-check.sh               |  8 ++++----
 test/btt-errors.sh              | 22 +++++++++++-----------
 test/btt-pad-compat.sh          | 12 ++++++------
 test/clear.sh                   | 12 ++++++------
 test/common                     | 10 +++++-----
 test/create.sh                  | 10 +++++-----
 test/daxdev-errors.sh           | 14 +++++++-------
 test/firmware-update.sh         |  8 ++++----
 test/inject-error.sh            |  8 ++++----
 test/inject-smart.sh            |  2 +-
 test/label-compat.sh            | 10 +++++-----
 test/max_available_extent_ns.sh |  8 ++++----
 test/monitor.sh                 | 10 +++++-----
 test/multi-dax.sh               | 12 ++++++------
 test/pfn-meta-errors.sh         |  8 ++++----
 test/pmem-errors.sh             |  8 ++++----
 test/rescan-partitions.sh       |  8 ++++----
 test/sector-mode.sh             | 14 +++++++-------
 test/security.sh                | 14 +++++++-------
 20 files changed, 106 insertions(+), 106 deletions(-)

Patch
diff mbox series

diff --git a/test/blk-exhaust.sh b/test/blk-exhaust.sh
index 326ce73..067ed27 100755
--- a/test/blk-exhaust.sh
+++ b/test/blk-exhaust.sh
@@ -23,17 +23,17 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 # if the kernel accounting is correct we should be able to create two
 # pmem and two blk namespaces on nfit_test.0
 rc=1
-$NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem
-$NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem
-$NDCTL create-namespace -b $NFIT_TEST_BUS0 -t blk -m raw
-$NDCTL create-namespace -b $NFIT_TEST_BUS0 -t blk -m raw
+$NDCTL create-namespace -b $TEST_BUS0 -t pmem
+$NDCTL create-namespace -b $TEST_BUS0 -t pmem
+$NDCTL create-namespace -b $TEST_BUS0 -t blk -m raw
+$NDCTL create-namespace -b $TEST_BUS0 -t blk -m raw
 
 # clearnup and exit
 _cleanup
diff --git a/test/btt-check.sh b/test/btt-check.sh
index ceabee5..c91a5ad 100755
--- a/test/btt-check.sh
+++ b/test/btt-check.sh
@@ -37,7 +37,7 @@  check_min_kver "4.14" || do_skip "may not support badblocks clearing on pmem via
 
 create()
 {
-	json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m sector)
+	json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m sector)
 	rc=2
 	eval "$(echo "$json" | json2var)"
 	[ -n "$dev" ] || err "$LINENO"
@@ -50,9 +50,9 @@  create()
 
 reset()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 }
 
 # re-enable the BTT namespace, and do IO to it in an attempt to
diff --git a/test/btt-errors.sh b/test/btt-errors.sh
index cb35865..65224b3 100755
--- a/test/btt-errors.sh
+++ b/test/btt-errors.sh
@@ -54,15 +54,15 @@  trap 'err $LINENO cleanup' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 rc=1
 
 # create a btt namespace and clear errors (if any)
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m sector)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m sector)
 eval "$(echo "$json" | json2var)"
 [ $dev = "x" ] && echo "fail: $LINENO" && exit 1
 
@@ -135,11 +135,11 @@  dd if=$MNT/$FILE of=/dev/null iflag=direct bs=4096 count=1
 
 # reset everything to get a clean log
 if grep -q "$MNT" /proc/mounts; then umount $MNT; fi
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m sector)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m sector)
 eval "$(echo "$json" | json2var)"
 [ $dev = "x" ] && echo "fail: $LINENO" && exit 1
 
@@ -157,8 +157,8 @@  force_raw 0
 dd if=/dev/$blockdev of=/dev/null iflag=direct bs=4096 count=1 && err $LINENO || true
 
 # done, exit
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 _cleanup
 exit 0
diff --git a/test/btt-pad-compat.sh b/test/btt-pad-compat.sh
index 2c1f271..a5fc796 100755
--- a/test/btt-pad-compat.sh
+++ b/test/btt-pad-compat.sh
@@ -31,7 +31,7 @@  trap 'err $LINENO' ERR
 
 create()
 {
-	json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m sector)
+	json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m sector)
 	rc=2
 	eval "$(echo "$json" | json2var)"
 	[ -n "$dev" ] || err "$LINENO"
@@ -47,9 +47,9 @@  create()
 
 reset()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 }
 
 verify_idx()
@@ -120,7 +120,7 @@  create_oldfmt_ns()
 	# that supports a raw namespace with a 4K sector size, prior to
 	# v4.13 raw namespaces are limited to 512-byte sector size.
 	rc=77
-	json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -s 64M -t pmem -m raw -l 4096 -u 00000000-0000-0000-0000-000000000000)
+	json=$($NDCTL create-namespace -b $TEST_BUS0 -s 64M -t pmem -m raw -l 4096 -u 00000000-0000-0000-0000-000000000000)
 	rc=2
 	eval "$(echo "$json" | json2var)"
 	[ -n "$dev" ] || err "$LINENO"
@@ -128,7 +128,7 @@  create_oldfmt_ns()
 	[ $size -gt 0 ] || err "$LINENO"
 
 	# reconfig it to sector mode
-	json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -e $dev -m sector --force)
+	json=$($NDCTL create-namespace -b $TEST_BUS0 -e $dev -m sector --force)
 	eval "$(echo "$json" | json2var)"
 	[ -n "$dev" ] || err "$LINENO"
 	[ -n "$size" ] || err "$LINENO"
diff --git a/test/clear.sh b/test/clear.sh
index 17d5bed..f0b4a9b 100755
--- a/test/clear.sh
+++ b/test/clear.sh
@@ -23,15 +23,15 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 rc=1
 
 # create pmem
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m raw)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m raw)
 eval $(echo $json | json2var)
 [ $dev = "x" ] && echo "fail: $LINENO" && exit 1
 [ $mode != "raw" ] && echo "fail: $LINENO" && exit 1
@@ -73,8 +73,8 @@  fi
 
 if check_min_kver "4.9"; then
 	# check for re-appearance of stale badblocks from poison_list
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 
 	# since we have cleared the errors, a disable/reenable shouldn't bring them back
 	if read sector len < /sys/block/$blockdev/badblocks; then
diff --git a/test/common b/test/common
index 1814a0c..54085ae 100644
--- a/test/common
+++ b/test/common
@@ -27,10 +27,10 @@  else
 fi
 
 
-# NFIT_TEST_BUS[01]
+# TEST_BUS[01]
 #
-NFIT_TEST_BUS0="nfit_test.0"
-NFIT_TEST_BUS1="nfit_test.1"
+TEST_BUS0="nfit_test.0"
+TEST_BUS1="nfit_test.1"
 ACPI_BUS="ACPI.NFIT"
 E820_BUS="e820"
 
@@ -82,8 +82,8 @@  check_prereq()
 #
 _cleanup()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL disable-region -b $NFIT_TEST_BUS1 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS1 all
 	modprobe -r nfit_test
 }
 
diff --git a/test/create.sh b/test/create.sh
index 8d78797..1398c79 100755
--- a/test/create.sh
+++ b/test/create.sh
@@ -24,15 +24,15 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 rc=1
 
 # create pmem
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m raw)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m raw)
 eval $(echo $json | json2var )
 [ $dev = "x" ] && echo "fail: $LINENO" && exit 1
 [ $mode != "raw" ] && echo "fail: $LINENO" &&  exit 1
@@ -53,7 +53,7 @@  $NDCTL destroy-namespace -f $dev
 
 # create blk
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t blk -m raw -v)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t blk -m raw -v)
 eval $(echo $json | json2var)
 [ $dev = "x" ] && echo "fail: $LINENO" && exit 1
 [ $mode != "raw" ] && echo "fail: $LINENO" &&  exit 1
diff --git a/test/daxdev-errors.sh b/test/daxdev-errors.sh
index c5adb72..c877874 100755
--- a/test/daxdev-errors.sh
+++ b/test/daxdev-errors.sh
@@ -23,16 +23,16 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 rc=1
 
 query=". | sort_by(.available_size) | reverse | .[0].dev"
-region=$($NDCTL list -b $NFIT_TEST_BUS0 -t pmem -Ri | jq -r "$query")
+region=$($NDCTL list -b $TEST_BUS0 -t pmem -Ri | jq -r "$query")
 
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -r $region -t pmem -m devdax -a 4096)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -r $region -t pmem -m devdax -a 4096)
 chardev=$(echo $json | jq ". | select(.mode == \"devdax\") | .daxregion.devices[0].chardev")
 
 #{
@@ -53,11 +53,11 @@  chardev=$(echo $json | jq ". | select(.mode == \"devdax\") | .daxregion.devices[
 #  }
 #}
 
-json1=$($NDCTL list -b $NFIT_TEST_BUS0 --mode=devdax --namespaces)
+json1=$($NDCTL list -b $TEST_BUS0 --mode=devdax --namespaces)
 eval $(echo $json1 | json2var)
 nsdev=$dev
 
-json1=$($NDCTL list -b $NFIT_TEST_BUS0)
+json1=$($NDCTL list -b $TEST_BUS0)
 eval $(echo $json1 | json2var)
 busdev=$dev
 
diff --git a/test/firmware-update.sh b/test/firmware-update.sh
index 7852e58..dbd5c7f 100755
--- a/test/firmware-update.sh
+++ b/test/firmware-update.sh
@@ -12,9 +12,9 @@  trap 'err $LINENO' ERR
 
 reset()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 	if [ -f $image ]; then
 		rm -f $image
 	fi
@@ -22,7 +22,7 @@  reset()
 
 detect()
 {
-	dev=$($NDCTL list -b $NFIT_TEST_BUS0 -D | jq .[0].dev | tr -d '"')
+	dev=$($NDCTL list -b $TEST_BUS0 -D | jq .[0].dev | tr -d '"')
 	[ -n "$dev" ] || err "$LINENO"
 }
 
diff --git a/test/inject-error.sh b/test/inject-error.sh
index 49e68b3..3e33a1b 100755
--- a/test/inject-error.sh
+++ b/test/inject-error.sh
@@ -35,7 +35,7 @@  check_min_kver "4.15" || do_skip "kernel $KVER may not support error injection"
 
 create()
 {
-	json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem --align=4k)
+	json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem --align=4k)
 	rc=2
 	eval "$(echo "$json" | json2var)"
 	[ -n "$dev" ] || err "$LINENO"
@@ -46,9 +46,9 @@  create()
 
 reset()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 }
 
 check_status()
diff --git a/test/inject-smart.sh b/test/inject-smart.sh
index 18655ba..fa18a58 100755
--- a/test/inject-smart.sh
+++ b/test/inject-smart.sh
@@ -4,7 +4,7 @@ 
 
 rc=77
 . ./common
-bus="$NFIT_TEST_BUS0"
+bus="$TEST_BUS0"
 inj_val="42"
 
 trap 'err $LINENO' ERR
diff --git a/test/label-compat.sh b/test/label-compat.sh
index dc6226d..a31bf4a 100755
--- a/test/label-compat.sh
+++ b/test/label-compat.sh
@@ -23,12 +23,12 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
 
-# grab the largest pmem region on -b $NFIT_TEST_BUS0
+# grab the largest pmem region on -b $TEST_BUS0
 query=". | sort_by(.available_size) | reverse | .[0].dev"
-region=$($NDCTL list -b $NFIT_TEST_BUS0 -t pmem -Ri | jq -r "$query")
+region=$($NDCTL list -b $TEST_BUS0 -t pmem -Ri | jq -r "$query")
 
 # we assume that $region is comprised of 4 dimms
 query=". | .regions[0].mappings | sort_by(.dimm) | .[].dimm"
@@ -40,7 +40,7 @@  do
 	i=$((i+1))
 done
 
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 len=$($NDCTL list -r $region -N | jq -r "length")
 
diff --git a/test/max_available_extent_ns.sh b/test/max_available_extent_ns.sh
index 1c7e7bf..5701195 100755
--- a/test/max_available_extent_ns.sh
+++ b/test/max_available_extent_ns.sh
@@ -13,14 +13,14 @@  check_min_kver "4.19" || do_skip "kernel $KVER may not support max_available_siz
 
 init()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 }
 
 do_test()
 {
-	region=$($NDCTL list -b $NFIT_TEST_BUS0 -R -t pmem | jq -r 'sort_by(-.size) | .[].dev' | head -1)
+	region=$($NDCTL list -b $TEST_BUS0 -R -t pmem | jq -r 'sort_by(-.size) | .[].dev' | head -1)
 
 	available_sz=$($NDCTL list -r $region | jq -r .[].available_size)
 	size=$(( available_sz/4 ))
diff --git a/test/monitor.sh b/test/monitor.sh
index 29d4ea1..c9f7224 100755
--- a/test/monitor.sh
+++ b/test/monitor.sh
@@ -20,9 +20,9 @@  check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service"
 
 init()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 }
 
 start_monitor()
@@ -36,10 +36,10 @@  start_monitor()
 
 set_smart_supported_bus()
 {
-	smart_supported_bus=$NFIT_TEST_BUS0
+	smart_supported_bus=$TEST_BUS0
 	monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq -r .[0].dev)
 	if [ -z $monitor_dimms ]; then
-		smart_supported_bus=$NFIT_TEST_BUS1
+		smart_supported_bus=$TEST_BUS1
 	fi
 }
 
diff --git a/test/multi-dax.sh b/test/multi-dax.sh
index 0829bf2..1dca352 100755
--- a/test/multi-dax.sh
+++ b/test/multi-dax.sh
@@ -23,17 +23,17 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 rc=1
 
 query=". | sort_by(.available_size) | reverse | .[0].dev"
-region=$($NDCTL list -b $NFIT_TEST_BUS0 -t pmem -Ri | jq -r "$query")
+region=$($NDCTL list -b $TEST_BUS0 -t pmem -Ri | jq -r "$query")
 
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -r $region -t pmem -m devdax -a 4096 -s 16M)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -r $region -t pmem -m devdax -a 4096 -s 16M)
 chardev1=$(echo $json | jq ". | select(.mode == \"devdax\") | .daxregion.devices[0].chardev")
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -r $region -t pmem -m devdax -a 4096 -s 16M)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -r $region -t pmem -m devdax -a 4096 -s 16M)
 chardev2=$(echo $json | jq ". | select(.mode == \"devdax\") | .daxregion.devices[0].chardev")
 
 _cleanup
diff --git a/test/pfn-meta-errors.sh b/test/pfn-meta-errors.sh
index 2b57f19..f930325 100755
--- a/test/pfn-meta-errors.sh
+++ b/test/pfn-meta-errors.sh
@@ -30,15 +30,15 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 rc=1
 
 # create a fsdax namespace and clear errors (if any)
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m fsdax)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m fsdax)
 eval "$(echo "$json" | json2var)"
 [ $dev = "x" ] && echo "fail: $LINENO" && exit 1
 
diff --git a/test/pmem-errors.sh b/test/pmem-errors.sh
index 9553a3f..8ce57c8 100755
--- a/test/pmem-errors.sh
+++ b/test/pmem-errors.sh
@@ -28,15 +28,15 @@  trap 'err $LINENO cleanup' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
 rc=1
 
 # create pmem
 dev="x"
-json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m raw)
+json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m raw)
 eval $(echo $json | json2var)
 [ $dev = "x" ] && echo "fail: $LINENO" && false
 [ $mode != "raw" ] && echo "fail: $LINENO" && false
diff --git a/test/rescan-partitions.sh b/test/rescan-partitions.sh
index 9c7b7a0..5e01665 100755
--- a/test/rescan-partitions.sh
+++ b/test/rescan-partitions.sh
@@ -27,9 +27,9 @@  check_prereq "blockdev"
 
 reset()
 {
-	$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+	$NDCTL disable-region -b $TEST_BUS0 all
+	$NDCTL zero-labels -b $TEST_BUS0 all
+	$NDCTL enable-region -b $TEST_BUS0 all
 }
 
 test_mode()
@@ -37,7 +37,7 @@  test_mode()
 	local mode="$1"
 
 	# create namespace
-	json=$($NDCTL create-namespace -b $NFIT_TEST_BUS0 -t pmem -m "$mode")
+	json=$($NDCTL create-namespace -b $TEST_BUS0 -t pmem -m "$mode")
 	rc=2
 	eval "$(echo "$json" | json2var)"
 	[ -n "$dev" ] || err "$LINENO"
diff --git a/test/sector-mode.sh b/test/sector-mode.sh
index 4b964c5..7f60452 100755
--- a/test/sector-mode.sh
+++ b/test/sector-mode.sh
@@ -20,17 +20,17 @@  trap 'err $LINENO' ERR
 
 # setup (reset nfit_test dimms)
 modprobe nfit_test
-$NDCTL disable-region -b $NFIT_TEST_BUS0 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
-$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+$NDCTL disable-region -b $TEST_BUS0 all
+$NDCTL zero-labels -b $TEST_BUS0 all
+$NDCTL enable-region -b $TEST_BUS0 all
 
-$NDCTL disable-region -b $NFIT_TEST_BUS1 all
-$NDCTL zero-labels -b $NFIT_TEST_BUS1 all
-$NDCTL enable-region -b $NFIT_TEST_BUS1 all
+$NDCTL disable-region -b $TEST_BUS1 all
+$NDCTL zero-labels -b $TEST_BUS1 all
+$NDCTL enable-region -b $TEST_BUS1 all
 
 rc=1
 query=". | sort_by(.size) | reverse | .[0].dev"
-NAMESPACE=$($NDCTL list -b $NFIT_TEST_BUS1 -N | jq -r "$query")
+NAMESPACE=$($NDCTL list -b $TEST_BUS1 -N | jq -r "$query")
 REGION=$($NDCTL list -R --namespace=$NAMESPACE | jq -r "(.[]) | .dev")
 echo 0 > /sys/bus/nd/devices/$REGION/read_only
 $NDCTL create-namespace --no-autolabel -e $NAMESPACE -m sector -f -l 4K
diff --git a/test/security.sh b/test/security.sh
index c86d2c6..80d64df 100755
--- a/test/security.sh
+++ b/test/security.sh
@@ -17,14 +17,14 @@  trap 'err $LINENO' ERR
 
 setup()
 {
-	$NDCTL disable-region -b "$NFIT_TEST_BUS0" all
+	$NDCTL disable-region -b "$TEST_BUS0" all
 }
 
 detect()
 {
-	dev="$($NDCTL list -b "$NFIT_TEST_BUS0" -D | jq -r .[0].dev)"
+	dev="$($NDCTL list -b "$TEST_BUS0" -D | jq -r .[0].dev)"
 	[ -n "$dev" ] || err "$LINENO"
-	id="$($NDCTL list -b "$NFIT_TEST_BUS0" -D | jq -r .[0].id)"
+	id="$($NDCTL list -b "$TEST_BUS0" -D | jq -r .[0].id)"
 	[ -n "$id" ] || err "$LINENO"
 }
 
@@ -83,9 +83,9 @@  lock_dimm()
 	# inline. Once a subsequent user arrives we can refactor this to a
 	# helper in test/common:
 	#   get_test_dimm_path "nfit_test.0" "nmem3"
-	handle="$($NDCTL list -b "$NFIT_TEST_BUS0"  -d "$dev" -i | jq -r .[].dimms[0].handle)"
+	handle="$($NDCTL list -b "$TEST_BUS0"  -d "$dev" -i | jq -r .[].dimms[0].handle)"
 	test_dimm_path=""
-	for test_dimm in /sys/devices/platform/"$NFIT_TEST_BUS0"/nfit_test_dimm/test_dimm*; do
+	for test_dimm in /sys/devices/platform/"$TEST_BUS0"/nfit_test_dimm/test_dimm*; do
 		td_handle_file="$test_dimm/handle"
 		test -e "$td_handle_file" || continue
 		td_handle="$(cat "$td_handle_file")"
@@ -107,7 +107,7 @@  lock_dimm()
 
 get_security_state()
 {
-	$NDCTL list -i -b "$NFIT_TEST_BUS0" -d "$dev" | jq -r .[].dimms[0].security
+	$NDCTL list -i -b "$TEST_BUS0" -d "$dev" | jq -r .[].dimms[0].security
 }
 
 setup_passphrase()
@@ -184,7 +184,7 @@  test_4_security_unlock()
 		echo "Incorrect security state: $sstate expected: unlocked"
 		err "$LINENO"
 	fi
-	$NDCTL disable-region -b "$NFIT_TEST_BUS0" all
+	$NDCTL disable-region -b "$TEST_BUS0" all
 	remove_passphrase
 }