diff mbox series

[v3,1/5] media: dt-bindings: Add jpeg enc device tree node document

Message ID 20190924074303.22713-2-xia.jiang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add support for mt2701 JPEG ENC support | expand

Commit Message

Xia Jiang Sept. 24, 2019, 7:43 a.m. UTC 
Add jpeg enc device tree node document.

Signed-off-by: Xia Jiang <xia.jiang@mediatek.com>
---
v3: change compatible to SoC specific compatible

v2: no changes
---
 .../bindings/media/mediatek-jpeg-encoder.txt  | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt

Comments

Rob Herring Sept. 27, 2019, 6:31 p.m. UTC | #1 
On Tue, 24 Sep 2019 15:43:00 +0800, Xia Jiang wrote:
> Add jpeg enc device tree node document.
> 
> Signed-off-by: Xia Jiang <xia.jiang@mediatek.com>
> ---
> v3: change compatible to SoC specific compatible
> 
> v2: no changes
> ---
>  .../bindings/media/mediatek-jpeg-encoder.txt  | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
new file mode 100644
index 000000000000..fa8da699493b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
@@ -0,0 +1,37 @@ 
+* MediaTek JPEG Encoder
+
+MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+Required properties:
+- compatible : should be one of:
+               "mediatek,mt2701-jpgenc"
+               ...
+               followed by "mediatek,mtk-jpgenc"
+- reg : physical base address of the JPEG encoder registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current SoCs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+
+Example:
+	jpegenc: jpegenc@1500a000 {
+		compatible = "mediatek,mt2701-jpgenc",
+			     "mediatek,mtk-jpgenc";
+		reg = <0 0x1500a000 0 0x1000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_VENC>;
+		clock-names = "jpgenc";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+	};