@@ -126,9 +126,9 @@ endif
# in the default INSTALL_HDR_PATH usr/include.
khdr:
ifeq (1,$(DEFAULT_INSTALL_HDR_PATH))
- make --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install
+ $(MAKE) --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install
else
- make --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \
+ $(MAKE) --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \
ARCH=$(ARCH) -C $(top_srcdir) headers_install
endif
@@ -136,35 +136,35 @@ all: khdr
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
mkdir $$BUILD_TARGET -p; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_tests: all
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
done;
hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_hotplug: hotplug
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
done;
clean_hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
run_pstore_crash:
- make -C pstore run_crash
+ $(MAKE) -C pstore run_crash
# Use $BUILD as the default install root. $BUILD points to the
# right output location for the following cases:
@@ -184,7 +184,7 @@ ifdef INSTALL_PATH
install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
done;
@# Ask all targets to emit their test scripts
@@ -203,7 +203,7 @@ ifdef INSTALL_PATH
echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
echo "cd $$TARGET" >> $(ALL_SCRIPT); \
echo -n "run_many" >> $(ALL_SCRIPT); \
- make -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
+ $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
echo "" >> $(ALL_SCRIPT); \
echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
done;
@@ -216,7 +216,7 @@ endif
clean:
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean
@@ -28,7 +28,7 @@ if [ -z "$FEATURE" ]; then
exit_unsupported
fi
-echo "Test snapshot tigger"
+echo "Test snapshot trigger"
echo 0 > snapshot
echo 1 > events/sched/sched_process_fork/enable
( echo "forked")
@@ -1 +1,3 @@
+CONFIG_LIVEPATCH=y
+CONFIG_DYNAMIC_DEBUG=y
CONFIG_TEST_LIVEPATCH=m
@@ -199,6 +199,11 @@ struct seccomp_notif_sizes {
};
#endif
+#ifndef PTRACE_EVENTMSG_SYSCALL_ENTRY
+#define PTRACE_EVENTMSG_SYSCALL_ENTRY 1
+#define PTRACE_EVENTMSG_SYSCALL_EXIT 2
+#endif
+
#ifndef seccomp
int seccomp(unsigned int op, unsigned int flags, void *args)
{
@@ -2,3 +2,4 @@
include ../lib.mk
TEST_PROGS := test_smoke.sh test_space.sh
+TEST_PROGS_EXTENDED := tpm2.py tpm2_tests.py
@@ -19,7 +19,7 @@
int fd;
const char v = 'V';
-static const char sopts[] = "bdehp:t:Tn:NL";
+static const char sopts[] = "bdehp:t:Tn:NLf:";
static const struct option lopts[] = {
{"bootstatus", no_argument, NULL, 'b'},
{"disable", no_argument, NULL, 'd'},
@@ -31,6 +31,7 @@ static const struct option lopts[] = {
{"pretimeout", required_argument, NULL, 'n'},
{"getpretimeout", no_argument, NULL, 'N'},
{"gettimeleft", no_argument, NULL, 'L'},
+ {"file", required_argument, NULL, 'f'},
{NULL, no_argument, NULL, 0x0}
};
@@ -69,16 +70,19 @@ static void term(int sig)
static void usage(char *progname)
{
printf("Usage: %s [options]\n", progname);
- printf(" -b, --bootstatus Get last boot status (Watchdog/POR)\n");
- printf(" -d, --disable Turn off the watchdog timer\n");
- printf(" -e, --enable Turn on the watchdog timer\n");
- printf(" -h, --help Print the help message\n");
- printf(" -p, --pingrate=P Set ping rate to P seconds (default %d)\n", DEFAULT_PING_RATE);
- printf(" -t, --timeout=T Set timeout to T seconds\n");
- printf(" -T, --gettimeout Get the timeout\n");
- printf(" -n, --pretimeout=T Set the pretimeout to T seconds\n");
- printf(" -N, --getpretimeout Get the pretimeout\n");
- printf(" -L, --gettimeleft Get the time left until timer expires\n");
+ printf(" -f, --file\t\tOpen watchdog device file\n");
+ printf("\t\t\tDefault is /dev/watchdog\n");
+ printf(" -b, --bootstatus\tGet last boot status (Watchdog/POR)\n");
+ printf(" -d, --disable\t\tTurn off the watchdog timer\n");
+ printf(" -e, --enable\t\tTurn on the watchdog timer\n");
+ printf(" -h, --help\t\tPrint the help message\n");
+ printf(" -p, --pingrate=P\tSet ping rate to P seconds (default %d)\n",
+ DEFAULT_PING_RATE);
+ printf(" -t, --timeout=T\tSet timeout to T seconds\n");
+ printf(" -T, --gettimeout\tGet the timeout\n");
+ printf(" -n, --pretimeout=T\tSet the pretimeout to T seconds\n");
+ printf(" -N, --getpretimeout\tGet the pretimeout\n");
+ printf(" -L, --gettimeleft\tGet the time left until timer expires\n");
printf("\n");
printf("Parameters are parsed left-to-right in real-time.\n");
printf("Example: %s -d -t 10 -p 5 -e\n", progname);
@@ -92,14 +96,20 @@ int main(int argc, char *argv[])
int ret;
int c;
int oneshot = 0;
+ char *file = "/dev/watchdog";
setbuf(stdout, NULL);
- fd = open("/dev/watchdog", O_WRONLY);
+ while ((c = getopt_long(argc, argv, sopts, lopts, NULL)) != -1) {
+ if (c == 'f')
+ file = optarg;
+ }
+
+ fd = open(file, O_WRONLY);
if (fd == -1) {
if (errno == ENOENT)
- printf("Watchdog device not enabled.\n");
+ printf("Watchdog device (%s) not found.\n", file);
else if (errno == EACCES)
printf("Run watchdog as root.\n");
else
@@ -108,6 +118,8 @@ int main(int argc, char *argv[])
exit(-1);
}
+ optind = 0;
+
while ((c = getopt_long(argc, argv, sopts, lopts, NULL)) != -1) {
switch (c) {
case 'b':
@@ -190,6 +202,9 @@ int main(int argc, char *argv[])
else
printf("WDIOC_GETTIMELEFT error '%s'\n", strerror(errno));
break;
+ case 'f':
+ /* Handled above */
+ break;
default:
usage(argv[0]);
Hi Linus, Please pull the following Kselftest update for Linux 5.4-rc1 (minus kunit). This Kselftest update for Linux 5.4-rc1 consists of several fixes to existing tests. diff is attached. This pull has just the ksleftest patches I sent in my previous pull request. I dropped the KUnit patches and rebased. I will send another pull request for the KUnit work later on this week. Please note that there is conflict between tools/testing/selftests/tpm2/Makefile between commit: 3fb2179b0f3553a ("selftests/tpm2: Add the missing TEST_FILES assignment") from the tpmdd tree and commit: d04e26067d13f01 ("selftests: tpm2: install python files") Please take the fix from kselftest tree which is the correct version for this change. d04e26067d13f01 ("selftests: tpm2: install python files") Please let me know if you have any questions and/or concerns. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit d1abaeb3be7b5fa6d7a1fbbd2e14e3310005c4c1: Linux 5.3-rc5 (2019-08-18 14:31:08 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-5.4-rc1.1 for you to fetch changes up to 721cb3c8bc8890e824b7be53bf951960ff7811f9: selftests: tpm2: install python files (2019-09-23 08:33:16 -0600) ---------------------------------------------------------------- linux-kselftest-5.4-rc1.1 This Kselftest update for Linux 5.4-rc1 consists of fixes to existing tests. ---------------------------------------------------------------- Anders Roxell (2): selftests: livepatch: add missing fragments to config selftests: tpm2: install python files George G. Davis (2): selftests: watchdog: Add optional file argument selftests: watchdog: cleanup whitespace in usage options Ilya Leoshkevich (1): selftests: use "$(MAKE)" instead of "make" Masanari Iida (1): selftest/ftrace: Fix typo in trigger-snapshot.tc Tycho Andersen (1): selftests/seccomp: fix build on older kernels tools/testing/selftests/Makefile | 22 ++++++------ .../ftrace/test.d/trigger/trigger-snapshot.tc | 2 +- tools/testing/selftests/livepatch/config | 2 ++ tools/testing/selftests/seccomp/seccomp_bpf.c | 5 +++ tools/testing/selftests/tpm2/Makefile | 1 + tools/testing/selftests/watchdog/watchdog-test.c | 41 +++++++++++++++------- 6 files changed, 48 insertions(+), 25 deletions(-) ----------------------------------------------------------------