| Message ID | 20191002041654.3620-1-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 915603b106164f966ebc027de96e54011885bdf4 |
| Headers | show |
| Series | arm64: dts: qcom: db845c: Enable LVS 1 and 2 | expand |
On 01-10-19, 21:16, Bjorn Andersson wrote: > vreg_lvs1a_1p8 and vreg_lvs2a_1p8 are both feeding pins in the low speed > connectors and should as such alway be on, so enable them. Acked-by: Vinod Koul <vkoul@kernel.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c314b5d55796..6e97ae7f7a08 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -312,6 +312,18 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; pmi8998-rpmh-regulators {
vreg_lvs1a_1p8 and vreg_lvs2a_1p8 are both feeding pins in the low speed connectors and should as such alway be on, so enable them. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)