Message ID | 1570029619-43238-2-git-send-email-biju.das@bp.renesas.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | fbdcdb9c86218a917174892aa7e9aac7cc498ca1 |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | Add Display support | expand |
On Wed, Oct 2, 2019 at 5:20 PM Biju Das <biju.das@bp.renesas.com> wrote: > RZ/G2N board is pin compatible with RZ/G2M board. However on the SoC > side RZ/G2N uses DU3 where as RZ/G2M uses DU2 for the DPAD. In order to > reuse the common dtsi for both the boards, it is required to move du clock > properties from common dtsi to board specific dts. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> i.e. will queue in renesas-devel for v5.5. Gr{oetje,eeting}s, Geert
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 3e376d2..355d0a2 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -142,14 +142,6 @@ }; &du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts index 93ca973..96f2fb0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -24,3 +24,14 @@ reg = <0x6 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +};