| Message ID | 1570412509-7893-3-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V6,1/5] dt-bindings: fsl: scu: add scu key binding | expand |
Hi, Shawn Dmitry has picked up the #1 and #2 patch, would you please pick up #3 ~ #5, thanks. Anson > Subject: [PATCH V6 3/5] arm64: dts: imx8qxp: Add scu key node > > Add scu key node for i.MX8QXP, disabled by default as it depends on board > design. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > --- > Changes since V5: > - use "linux,keycodes" instead of "linux,keycode". > --- > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > index 1133b41..2d69f1a 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > @@ -8,6 +8,7 @@ > #include <dt-bindings/clock/imx8-clock.h> #include <dt- > bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/pinctrl/pads-imx8qxp.h> > > @@ -174,6 +175,12 @@ > #power-domain-cells = <1>; > }; > > + scu_key: scu-key { > + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; > + linux,keycodes = <KEY_POWER>; > + status = "disabled"; > + }; > + > rtc: rtc { > compatible = "fsl,imx8qxp-sc-rtc"; > }; > -- > 2.7.4
On Fri, Oct 18, 2019 at 01:40:10AM +0000, Anson Huang wrote: > Hi, Shawn > Dmitry has picked up the #1 and #2 patch, would you please pick up #3 ~ #5, thanks. > Applied #3 ~ #5, thanks. Shawn
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1133b41..2d69f1a 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> @@ -174,6 +175,12 @@ #power-domain-cells = <1>; }; + scu_key: scu-key { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + status = "disabled"; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; };
Add scu key node for i.MX8QXP, disabled by default as it depends on board design. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- Changes since V5: - use "linux,keycodes" instead of "linux,keycode". --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)