| Message ID | 20191010012523.14426-2-rjones@gateworks.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: imu: add support for FXOS8700 | expand |
On Wed, Oct 9, 2019 at 8:25 PM Robert Jones <rjones@gateworks.com> wrote: > > This adds documentation for the Freescale FXOS8700 Inertial Measurement Unit > device-tree bindings. > > Signed-off-by: Robert Jones <rjones@gateworks.com> > --- > .../devicetree/bindings/iio/imu/fxos8700.yaml | 54 ++++++++++++++++++++++ Follow the compatible string name, so fsl,fxos8700.yaml. > 1 file changed, 54 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/imu/fxos8700.yaml > > diff --git a/Documentation/devicetree/bindings/iio/imu/fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/fxos8700.yaml > new file mode 100644 > index 0000000..f0dbf4b > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/imu/fxos8700.yaml > @@ -0,0 +1,54 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/imu/fxos8700.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale FXOS8700 Inertial Measurement Unit > + > +maintainers: > + - Robert Jones <rjones@gateworks.com> > + > +description: | > + Accelerometer and magnetometer combo device with an i2c interface. Also has a SPI interface. > + https://www.nxp.com/products/sensors/motion-sensors/6-axis/digital-motion-sensor-3d-accelerometer-2g-4g-8g-plus-3d-magnetometer:FXOS8700CQ > + > +properties: > + compatible: > + enum: > + - fsl,fxos8700 For a new binding, shouldn't this be nxp instead of fsl? > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + interrupt-names: > + maxItems: 1 'const: INT1' instead. However, having '-names' doesn't really buy much when there is only 1 entry, so I'd just drop it. But then I read the datasheet and there are 2 interrupts, so you need to describe 2 interrupts. > + > + drive-open-drain: > + maxItems: 1 Should be boolean. > + > + spi-max-frequency: > + maxItems: 1 spi-max-frequency is not an array. You should define the maximum for it. > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + fxos8700@1e { > + compatible = "fsl,fxos8700"; > + reg = <0x1e>; > + > + interrupt-parent = <&gpio2>; > + interrupts = <7 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "INT1"; > + }; > + }; > -- > 2.9.2 >
diff --git a/Documentation/devicetree/bindings/iio/imu/fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/fxos8700.yaml new file mode 100644 index 0000000..f0dbf4b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/fxos8700.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/fxos8700.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FXOS8700 Inertial Measurement Unit + +maintainers: + - Robert Jones <rjones@gateworks.com> + +description: | + Accelerometer and magnetometer combo device with an i2c interface. + https://www.nxp.com/products/sensors/motion-sensors/6-axis/digital-motion-sensor-3d-accelerometer-2g-4g-8g-plus-3d-magnetometer:FXOS8700CQ + +properties: + compatible: + enum: + - fsl,fxos8700 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + drive-open-drain: + maxItems: 1 + + spi-max-frequency: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fxos8700@1e { + compatible = "fsl,fxos8700"; + reg = <0x1e>; + + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + };
This adds documentation for the Freescale FXOS8700 Inertial Measurement Unit device-tree bindings. Signed-off-by: Robert Jones <rjones@gateworks.com> --- .../devicetree/bindings/iio/imu/fxos8700.yaml | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/imu/fxos8700.yaml