ath: rename regulatory rules
diff mbox series

Message ID 1570740795-12522-1-git-send-email-pozega.tomislav@gmail.com
State New
Headers show
Series
  • ath: rename regulatory rules
Related show

Commit Message

Tom Psyborg Oct. 10, 2019, 8:53 p.m. UTC
Regulatory rule defines in regd.c are used not only by ath9k but also
ath10k driver (haven't test other drivers) and thus should be
renamed from ATH9K* to ATH*.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
---
 drivers/net/wireless/ath/regd.c |   50 +++++++++++++++++++-------------------
 1 files changed, 25 insertions(+), 25 deletions(-)

Comments

Kalle Valo Oct. 14, 2019, 8:39 a.m. UTC | #1
Tomislav Požega wrote:

> Regulatory rule defines in regd.c are used not only by ath9k but also
> ath10k driver (haven't test other drivers) and thus should be
> renamed from ATH9K* to ATH*.
> 
> Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

f433abfc2f76 ath: rename regulatory rules

Patch
diff mbox series

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index e25bfdf..20f4f8e 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -33,33 +33,33 @@ 
  */
 
 /* Only these channels all allow active scan on all world regulatory domains */
-#define ATH9K_2GHZ_CH01_11	REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
+#define ATH_2GHZ_CH01_11	REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
 
 /* We enable active scan on these a case by case basis by regulatory domain */
-#define ATH9K_2GHZ_CH12_13	REG_RULE(2467-10, 2472+10, 40, 0, 20,\
+#define ATH_2GHZ_CH12_13	REG_RULE(2467-10, 2472+10, 40, 0, 20,\
 					 NL80211_RRF_NO_IR)
-#define ATH9K_2GHZ_CH14		REG_RULE(2484-10, 2484+10, 40, 0, 20,\
+#define ATH_2GHZ_CH14		REG_RULE(2484-10, 2484+10, 40, 0, 20,\
 					 NL80211_RRF_NO_IR | \
 					 NL80211_RRF_NO_OFDM)
 
 /* We allow IBSS on these on a case by case basis by regulatory domain */
-#define ATH9K_5GHZ_5150_5350	REG_RULE(5150-10, 5350+10, 80, 0, 30,\
+#define ATH_5GHZ_5150_5350	REG_RULE(5150-10, 5350+10, 80, 0, 30,\
 					 NL80211_RRF_NO_IR)
-#define ATH9K_5GHZ_5470_5850	REG_RULE(5470-10, 5850+10, 80, 0, 30,\
+#define ATH_5GHZ_5470_5850	REG_RULE(5470-10, 5850+10, 80, 0, 30,\
 					 NL80211_RRF_NO_IR)
-#define ATH9K_5GHZ_5725_5850	REG_RULE(5725-10, 5850+10, 80, 0, 30,\
+#define ATH_5GHZ_5725_5850	REG_RULE(5725-10, 5850+10, 80, 0, 30,\
 					 NL80211_RRF_NO_IR)
 
-#define ATH9K_2GHZ_ALL		ATH9K_2GHZ_CH01_11, \
-				ATH9K_2GHZ_CH12_13, \
-				ATH9K_2GHZ_CH14
+#define ATH_2GHZ_ALL		ATH_2GHZ_CH01_11, \
+				ATH_2GHZ_CH12_13, \
+				ATH_2GHZ_CH14
 
-#define ATH9K_5GHZ_ALL		ATH9K_5GHZ_5150_5350, \
-				ATH9K_5GHZ_5470_5850
+#define ATH_5GHZ_ALL		ATH_5GHZ_5150_5350, \
+				ATH_5GHZ_5470_5850
 
 /* This one skips what we call "mid band" */
-#define ATH9K_5GHZ_NO_MIDBAND	ATH9K_5GHZ_5150_5350, \
-				ATH9K_5GHZ_5725_5850
+#define ATH_5GHZ_NO_MIDBAND	ATH_5GHZ_5150_5350, \
+				ATH_5GHZ_5725_5850
 
 /* Can be used for:
  * 0x60, 0x61, 0x62 */
@@ -67,8 +67,8 @@ 
 	.n_reg_rules = 5,
 	.alpha2 =  "99",
 	.reg_rules = {
-		ATH9K_2GHZ_ALL,
-		ATH9K_5GHZ_ALL,
+		ATH_2GHZ_ALL,
+		ATH_5GHZ_ALL,
 	}
 };
 
@@ -77,9 +77,9 @@ 
 	.n_reg_rules = 4,
 	.alpha2 =  "99",
 	.reg_rules = {
-		ATH9K_2GHZ_CH01_11,
-		ATH9K_2GHZ_CH12_13,
-		ATH9K_5GHZ_NO_MIDBAND,
+		ATH_2GHZ_CH01_11,
+		ATH_2GHZ_CH12_13,
+		ATH_5GHZ_NO_MIDBAND,
 	}
 };
 
@@ -88,8 +88,8 @@ 
 	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
-		ATH9K_2GHZ_CH01_11,
-		ATH9K_5GHZ_NO_MIDBAND,
+		ATH_2GHZ_CH01_11,
+		ATH_5GHZ_NO_MIDBAND,
 	}
 };
 
@@ -98,8 +98,8 @@ 
 	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
-		ATH9K_2GHZ_CH01_11,
-		ATH9K_5GHZ_ALL,
+		ATH_2GHZ_CH01_11,
+		ATH_5GHZ_ALL,
 	}
 };
 
@@ -108,9 +108,9 @@ 
 	.n_reg_rules = 4,
 	.alpha2 =  "99",
 	.reg_rules = {
-		ATH9K_2GHZ_CH01_11,
-		ATH9K_2GHZ_CH12_13,
-		ATH9K_5GHZ_ALL,
+		ATH_2GHZ_CH01_11,
+		ATH_2GHZ_CH12_13,
+		ATH_5GHZ_ALL,
 	}
 };