| Message ID | 20191012145821.20846-2-nikitos.tr@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 3ba8bbc41f5d1169c6a27de44df0d88d3a44f239 |
| Headers | show |
| Series | [1/2] arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT | expand |
On Sat, Oct 12, 2019 at 07:58:21PM +0500, nikitos.tr@gmail.com wrote: > From: Nikita Travkin <nikitos.tr@gmail.com> > > Add nodes for Volume UP button connected to GPIO and Volume DOWN button, > which is handled by the pm8916 as is common with msm8916 devices. > > Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> > --- > .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts > index e4d467e7dedb..d1ccb9472c8b 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts > @@ -5,6 +5,7 @@ > #include "msm8916.dtsi" > #include "pm8916.dtsi" > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > > / { > model = "Longcheer L8150"; > @@ -113,9 +114,36 @@ > pinctrl-names = "default"; > pinctrl-0 = <&usb_vbus_default>; > }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_default>; > + > + label = "GPIO Buttons"; > + > + volume-up { > + label = "Volume Up"; > + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > }; > > &msmgpio { > + gpio_keys_default: gpio_keys_default { > + pinmux { > + function = "gpio"; > + pins = "gpio107"; > + }; > + pinconf { > + pins = "gpio107"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > usb_vbus_default: usb-vbus-default { > pinmux { > function = "gpio"; > @@ -128,6 +156,19 @@ > }; > }; > > +&spmi_bus { > + pm8916@0 { > + pon@800 { > + volume-down { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + bias-pull-up; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + }; > + }; > +}; > + > &smd_rpm_regulators { > vdd_l1_l2_l3-supply = <&pm8916_s3>; > vdd_l4_l5_l6-supply = <&pm8916_s4>; > -- > 2.19.1 >
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index e4d467e7dedb..d1ccb9472c8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -5,6 +5,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Longcheer L8150"; @@ -113,9 +114,36 @@ pinctrl-names = "default"; pinctrl-0 = <&usb_vbus_default>; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <2>; + bias-pull-up; + }; + }; + usb_vbus_default: usb-vbus-default { pinmux { function = "gpio"; @@ -128,6 +156,19 @@ }; }; +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>;