Message ID | 20191014135424.7000-2-festevam@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2,1/3] media: imx.rst: Specify the sabreauto variant | expand |
On 10/14/19 6:54 AM, Fabio Estevam wrote: > In the i.MX6Q sabreauto pipeline example, it is better to provide > a real example for the output format, so do it just like in the > previous lines for consistency. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> Acke-by: Steve Longerbeam <slongerbeam@gmail.com> > --- > Changes since v1: > - Make this change as part of a single patch > > Documentation/media/v4l-drivers/imx.rst | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst > index 3d72e411b93d..36e8d1226ac6 100644 > --- a/Documentation/media/v4l-drivers/imx.rst > +++ b/Documentation/media/v4l-drivers/imx.rst > @@ -547,8 +547,6 @@ This example configures a pipeline to capture from the ADV7180 > video decoder, assuming PAL 720x576 input signals, with Motion > Compensated de-interlacing. The adv7180 must output sequential or > alternating fields (field type 'seq-tb' for PAL, or 'alternate'). > -$outputfmt can be any format supported by the ipu1_ic_prpvf entity > -at its output pad: > > .. code-block:: none > > @@ -565,7 +563,7 @@ at its output pad: > media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]" > media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]" > media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]" > - media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]" > + media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]" > > Streaming can then begin on the capture device node at > "ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst index 3d72e411b93d..36e8d1226ac6 100644 --- a/Documentation/media/v4l-drivers/imx.rst +++ b/Documentation/media/v4l-drivers/imx.rst @@ -547,8 +547,6 @@ This example configures a pipeline to capture from the ADV7180 video decoder, assuming PAL 720x576 input signals, with Motion Compensated de-interlacing. The adv7180 must output sequential or alternating fields (field type 'seq-tb' for PAL, or 'alternate'). -$outputfmt can be any format supported by the ipu1_ic_prpvf entity -at its output pad: .. code-block:: none @@ -565,7 +563,7 @@ at its output pad: media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]" media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]" media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]" - media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]" + media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]" Streaming can then begin on the capture device node at "ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any
In the i.MX6Q sabreauto pipeline example, it is better to provide a real example for the output format, so do it just like in the previous lines for consistency. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Changes since v1: - Make this change as part of a single patch Documentation/media/v4l-drivers/imx.rst | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)