diff mbox series

[v2] iomap: iomap that extends beyond EOF should be marked dirty

Message ID 20191016060604.GH16973@dread.disaster.area (mailing list archive)
State New, archived
Headers show
Series [v2] iomap: iomap that extends beyond EOF should be marked dirty | expand

Commit Message

Dave Chinner Oct. 16, 2019, 6:06 a.m. UTC
From: Dave Chinner <dchinner@redhat.com>

When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.

However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion
when O_DSYNC writes are being used and the hardware supports FUA.

Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync()
to flush the inode size update to stable storage correctly.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
V2: put the XFS code in the right function, tested on non-FUA
capable hardware, too.

 fs/ext4/inode.c       | 9 ++++++++-
 fs/xfs/xfs_iomap.c    | 7 +++++++
 include/linux/iomap.h | 2 ++
 3 files changed, 17 insertions(+), 1 deletion(-)

Comments

Christoph Hellwig Oct. 16, 2019, 6:43 a.m. UTC | #1
I wonder if the i_size check should be done in core, similar to the
iomap_block_needs_zeroing helper.  But independent of what is nicer
this version does look correct to me:

Reviewed-by: Christoph Hellwig <hch@lst.de>
Theodore Ts'o Oct. 17, 2019, 12:29 p.m. UTC | #2
On Wed, Oct 16, 2019 at 05:06:04PM +1100, Dave Chinner wrote:
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 516faa280ced..e9dc52537e5b 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3523,9 +3523,16 @@ static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
>  			return ret;
>  	}
>  
> +	/*
> +	 * Writes that span EOF might trigger an IO size update on completion,
> +	 * so consider them to be dirty for the purposes of O_DSYNC even if
> +	 * there is no other metadata changes being made or are pending here.
> +	 */
>  	iomap->flags = 0;
> -	if (ext4_inode_datasync_dirty(inode))
> +	if (ext4_inode_datasync_dirty(inode) ||
> +	    offset + length > i_size_read(inode))
>  		iomap->flags |= IOMAP_F_DIRTY;
> +
>  	iomap->bdev = inode->i_sb->s_bdev;
>  	iomap->dax_dev = sbi->s_daxdev;
>  	iomap->offset = (u64)first_block << blkbits;

Ext4 is not currently using iomap for any kind of writing right now,
so perhaps this should land via Matthew's patchset?

					- Ted
Christoph Hellwig Oct. 17, 2019, 2:17 p.m. UTC | #3
On Thu, Oct 17, 2019 at 08:29:11AM -0400, Theodore Y. Ts'o wrote:
> > +	/*
> > +	 * Writes that span EOF might trigger an IO size update on completion,
> > +	 * so consider them to be dirty for the purposes of O_DSYNC even if
> > +	 * there is no other metadata changes being made or are pending here.
> > +	 */
> >  	iomap->flags = 0;
> > -	if (ext4_inode_datasync_dirty(inode))
> > +	if (ext4_inode_datasync_dirty(inode) ||
> > +	    offset + length > i_size_read(inode))
> >  		iomap->flags |= IOMAP_F_DIRTY;
> > +
> >  	iomap->bdev = inode->i_sb->s_bdev;
> >  	iomap->dax_dev = sbi->s_daxdev;
> >  	iomap->offset = (u64)first_block << blkbits;
> 
> Ext4 is not currently using iomap for any kind of writing right now,
> so perhaps this should land via Matthew's patchset?

It does for DAX, which is one of the consumers of IOMAP_F_DIRTY.
Theodore Ts'o Oct. 17, 2019, 2:48 p.m. UTC | #4
On Thu, Oct 17, 2019 at 07:17:05AM -0700, Christoph Hellwig wrote:
> > 
> > Ext4 is not currently using iomap for any kind of writing right now,
> > so perhaps this should land via Matthew's patchset?
> 
> It does for DAX, which is one of the consumers of IOMAP_F_DIRTY.

Ah, right, I had forgotten about DAX.

					- Ted
diff mbox series

Patch

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 516faa280ced..e9dc52537e5b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3523,9 +3523,16 @@  static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
 			return ret;
 	}
 
+	/*
+	 * Writes that span EOF might trigger an IO size update on completion,
+	 * so consider them to be dirty for the purposes of O_DSYNC even if
+	 * there is no other metadata changes being made or are pending here.
+	 */
 	iomap->flags = 0;
-	if (ext4_inode_datasync_dirty(inode))
+	if (ext4_inode_datasync_dirty(inode) ||
+	    offset + length > i_size_read(inode))
 		iomap->flags |= IOMAP_F_DIRTY;
+
 	iomap->bdev = inode->i_sb->s_bdev;
 	iomap->dax_dev = sbi->s_daxdev;
 	iomap->offset = (u64)first_block << blkbits;
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index f780e223b118..32993c2acbd9 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1049,6 +1049,13 @@  xfs_file_iomap_begin(
 	trace_xfs_iomap_alloc(ip, offset, length, XFS_DATA_FORK, &imap);
 
 out_finish:
+	/*
+	 * Writes that span EOF might trigger an IO size update on completion,
+	 * so consider them to be dirty for the purposes of O_DSYNC even if
+	 * there is no other metadata changes pending or have been made here.
+	 */
+	if ((flags & IOMAP_WRITE) && offset + length > i_size_read(inode))
+		iomap->flags |= IOMAP_F_DIRTY;
 	return xfs_bmbt_to_iomap(ip, iomap, &imap, shared);
 
 out_found:
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 7aa5d6117936..24bd227d59f9 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -32,6 +32,8 @@  struct vm_fault;
  *
  * IOMAP_F_DIRTY indicates the inode has uncommitted metadata needed to access
  * written data and requires fdatasync to commit them to persistent storage.
+ * This needs to take into account metadata changes that *may* be made at IO
+ * completion, such as file size updates from direct IO.
  */
 #define IOMAP_F_NEW		0x01	/* blocks have been newly allocated */
 #define IOMAP_F_DIRTY		0x02	/* uncommitted metadata */