[1/2] power: supply: cpcap-battery: Check voltage before orderly_poweroff

Commit Message

Tony Lindgren Oct. 16, 2019, 10:30 p.m. UTC

We can get the low voltage interrupt trigger sometimes way too early,
maybe because of CPU load spikes. This causes orderly_poweroff() be
called too easily.

Let's check the voltage before orderly_poweroff in case it was not
yet a permanent condition. We will be getting more interrupts anyways
if the condition persists.

Let's also show the measured voltages for low battery and battery
empty warnings since we have them.

Cc: Merlijn Wajer <[e-mail]>
Cc: Pavel Machek <[e-mail]>
Signed-off-by: Tony Lindgren <[e-mail]>
---
 drivers/power/supply/cpcap-battery.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -562,12 +562,14 @@  static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 	switch (d->action) {
 	case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
 		if (latest->current_ua >= 0)
-			dev_warn(ddata->dev, "Battery low at 3.3V!\n");
+			dev_warn(ddata->dev, "Battery low at %imV!\n",
+				latest->voltage / 1000);
 		break;
 	case CPCAP_BATTERY_IRQ_ACTION_POWEROFF:
-		if (latest->current_ua >= 0) {
+		if (latest->current_ua >= 0 && latest->voltage <= 3200000) {
 			dev_emerg(ddata->dev,
-				  "Battery empty at 3.1V, powering off\n");
+				  "Battery empty at %imV, powering off\n",
+				  latest->voltage / 1000);
 			orderly_poweroff(true);
 		}
 		break;