| Message ID | 20191017071234.8719-4-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | dt-bindings: max77650: convert the device-tree bindings to yaml | expand |
On Thu, Oct 17, 2019 at 09:12:31AM +0200, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > Convert the binding document for MAX77650 regulator module to YAML. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > --- > .../bindings/regulator/max77650-regulator.txt | 41 ------------------- > .../regulator/max77650-regulator.yaml | 31 ++++++++++++++ > 2 files changed, 31 insertions(+), 41 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.txt > create mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt > deleted file mode 100644 > index f1cbe813c30f..000000000000 > --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt > +++ /dev/null > @@ -1,41 +0,0 @@ > -Regulator driver for MAX77650 PMIC from Maxim Integrated. > - > -This module is part of the MAX77650 MFD device. For more details > -see Documentation/devicetree/bindings/mfd/max77650.txt. > - > -The regulator controller is represented as a sub-node of the PMIC node > -on the device tree. > - > -The device has a single LDO regulator and a SIMO buck-boost regulator with > -three independent power rails. > - > -Required properties: > --------------------- > -- compatible: Must be "maxim,max77650-regulator" > - > -Each rail must be instantiated under the regulators subnode of the top PMIC > -node. Up to four regulators can be defined. For standard regulator properties > -refer to Documentation/devicetree/bindings/regulator/regulator.txt. > - > -Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2". > - > -Example: > --------- > - > - regulators { > - compatible = "maxim,max77650-regulator"; > - > - max77650_ldo: regulator@0 { > - regulator-compatible = "ldo"; > - regulator-name = "max77650-ldo"; > - regulator-min-microvolt = <1350000>; > - regulator-max-microvolt = <2937500>; > - }; > - > - max77650_sbb0: regulator@1 { > - regulator-compatible = "sbb0"; > - regulator-name = "max77650-sbb0"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1587500>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > new file mode 100644 > index 000000000000..a8770742836d > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > @@ -0,0 +1,31 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Regulator driver for MAX77650 PMIC from Maxim Integrated. > + > +maintainers: > + - Bartosz Golaszewski <bgolaszewski@baylibre.com> > + > +description: | > + This module is part of the MAX77650 MFD device. For more details > + see Documentation/devicetree/bindings/mfd/max77650.txt. .yaml? > + > + The regulator controller is represented as a sub-node of the PMIC node > + on the device tree. > + > + The device has a single LDO regulator and a SIMO buck-boost regulator with > + three independent power rails. > + > +properties: > + compatible: > + const: maxim,max77650-regulator > + > +patternProperties: > + "^regulator@[0-3]$": > + $ref: "regulator.yaml#" > + > +required: > + - compatible > -- > 2.23.0 >
czw., 17 paź 2019 o 20:35 Rob Herring <robh@kernel.org> napisał(a): > > On Thu, Oct 17, 2019 at 09:12:31AM +0200, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > > > Convert the binding document for MAX77650 regulator module to YAML. > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > --- > > .../bindings/regulator/max77650-regulator.txt | 41 ------------------- > > .../regulator/max77650-regulator.yaml | 31 ++++++++++++++ > > 2 files changed, 31 insertions(+), 41 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.txt > > create mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > > > diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt > > deleted file mode 100644 > > index f1cbe813c30f..000000000000 > > --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt > > +++ /dev/null > > @@ -1,41 +0,0 @@ > > -Regulator driver for MAX77650 PMIC from Maxim Integrated. > > - > > -This module is part of the MAX77650 MFD device. For more details > > -see Documentation/devicetree/bindings/mfd/max77650.txt. > > - > > -The regulator controller is represented as a sub-node of the PMIC node > > -on the device tree. > > - > > -The device has a single LDO regulator and a SIMO buck-boost regulator with > > -three independent power rails. > > - > > -Required properties: > > --------------------- > > -- compatible: Must be "maxim,max77650-regulator" > > - > > -Each rail must be instantiated under the regulators subnode of the top PMIC > > -node. Up to four regulators can be defined. For standard regulator properties > > -refer to Documentation/devicetree/bindings/regulator/regulator.txt. > > - > > -Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2". > > - > > -Example: > > --------- > > - > > - regulators { > > - compatible = "maxim,max77650-regulator"; > > - > > - max77650_ldo: regulator@0 { > > - regulator-compatible = "ldo"; > > - regulator-name = "max77650-ldo"; > > - regulator-min-microvolt = <1350000>; > > - regulator-max-microvolt = <2937500>; > > - }; > > - > > - max77650_sbb0: regulator@1 { > > - regulator-compatible = "sbb0"; > > - regulator-name = "max77650-sbb0"; > > - regulator-min-microvolt = <800000>; > > - regulator-max-microvolt = <1587500>; > > - }; > > - }; > > diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > new file mode 100644 > > index 000000000000..a8770742836d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > @@ -0,0 +1,31 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Regulator driver for MAX77650 PMIC from Maxim Integrated. > > + > > +maintainers: > > + - Bartosz Golaszewski <bgolaszewski@baylibre.com> > > + > > +description: | > > + This module is part of the MAX77650 MFD device. For more details > > + see Documentation/devicetree/bindings/mfd/max77650.txt. > > .yaml? > Is there any better way of referencing the main document than mentioning it in the description? Bart > > + > > + The regulator controller is represented as a sub-node of the PMIC node > > + on the device tree. > > + > > + The device has a single LDO regulator and a SIMO buck-boost regulator with > > + three independent power rails. > > + > > +properties: > > + compatible: > > + const: maxim,max77650-regulator > > + > > +patternProperties: > > + "^regulator@[0-3]$": > > + $ref: "regulator.yaml#" > > + > > +required: > > + - compatible > > -- > > 2.23.0 > >
On Fri, Oct 18, 2019 at 1:45 AM Bartosz Golaszewski <bgolaszewski@baylibre.com> wrote: > > czw., 17 paź 2019 o 20:35 Rob Herring <robh@kernel.org> napisał(a): > > > > On Thu, Oct 17, 2019 at 09:12:31AM +0200, Bartosz Golaszewski wrote: > > > From: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > > > > > Convert the binding document for MAX77650 regulator module to YAML. > > > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > > --- > > > .../bindings/regulator/max77650-regulator.txt | 41 ------------------- > > > .../regulator/max77650-regulator.yaml | 31 ++++++++++++++ > > > 2 files changed, 31 insertions(+), 41 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.txt > > > create mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt > > > deleted file mode 100644 > > > index f1cbe813c30f..000000000000 > > > --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt > > > +++ /dev/null > > > @@ -1,41 +0,0 @@ > > > -Regulator driver for MAX77650 PMIC from Maxim Integrated. > > > - > > > -This module is part of the MAX77650 MFD device. For more details > > > -see Documentation/devicetree/bindings/mfd/max77650.txt. > > > - > > > -The regulator controller is represented as a sub-node of the PMIC node > > > -on the device tree. > > > - > > > -The device has a single LDO regulator and a SIMO buck-boost regulator with > > > -three independent power rails. > > > - > > > -Required properties: > > > --------------------- > > > -- compatible: Must be "maxim,max77650-regulator" > > > - > > > -Each rail must be instantiated under the regulators subnode of the top PMIC > > > -node. Up to four regulators can be defined. For standard regulator properties > > > -refer to Documentation/devicetree/bindings/regulator/regulator.txt. > > > - > > > -Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2". > > > - > > > -Example: > > > --------- > > > - > > > - regulators { > > > - compatible = "maxim,max77650-regulator"; > > > - > > > - max77650_ldo: regulator@0 { > > > - regulator-compatible = "ldo"; > > > - regulator-name = "max77650-ldo"; > > > - regulator-min-microvolt = <1350000>; > > > - regulator-max-microvolt = <2937500>; > > > - }; > > > - > > > - max77650_sbb0: regulator@1 { > > > - regulator-compatible = "sbb0"; > > > - regulator-name = "max77650-sbb0"; > > > - regulator-min-microvolt = <800000>; > > > - regulator-max-microvolt = <1587500>; > > > - }; > > > - }; > > > diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > > new file mode 100644 > > > index 000000000000..a8770742836d > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml > > > @@ -0,0 +1,31 @@ > > > +# SPDX-License-Identifier: GPL-2.0 > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Regulator driver for MAX77650 PMIC from Maxim Integrated. > > > + > > > +maintainers: > > > + - Bartosz Golaszewski <bgolaszewski@baylibre.com> > > > + > > > +description: | > > > + This module is part of the MAX77650 MFD device. For more details > > > + see Documentation/devicetree/bindings/mfd/max77650.txt. > > > > .yaml? > > > > Is there any better way of referencing the main document than > mentioning it in the description? No. Rob
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt deleted file mode 100644 index f1cbe813c30f..000000000000 --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt +++ /dev/null @@ -1,41 +0,0 @@ -Regulator driver for MAX77650 PMIC from Maxim Integrated. - -This module is part of the MAX77650 MFD device. For more details -see Documentation/devicetree/bindings/mfd/max77650.txt. - -The regulator controller is represented as a sub-node of the PMIC node -on the device tree. - -The device has a single LDO regulator and a SIMO buck-boost regulator with -three independent power rails. - -Required properties: --------------------- -- compatible: Must be "maxim,max77650-regulator" - -Each rail must be instantiated under the regulators subnode of the top PMIC -node. Up to four regulators can be defined. For standard regulator properties -refer to Documentation/devicetree/bindings/regulator/regulator.txt. - -Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2". - -Example: --------- - - regulators { - compatible = "maxim,max77650-regulator"; - - max77650_ldo: regulator@0 { - regulator-compatible = "ldo"; - regulator-name = "max77650-ldo"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <2937500>; - }; - - max77650_sbb0: regulator@1 { - regulator-compatible = "sbb0"; - regulator-name = "max77650-sbb0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1587500>; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml new file mode 100644 index 000000000000..a8770742836d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator driver for MAX77650 PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: | + This module is part of the MAX77650 MFD device. For more details + see Documentation/devicetree/bindings/mfd/max77650.txt. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The device has a single LDO regulator and a SIMO buck-boost regulator with + three independent power rails. + +properties: + compatible: + const: maxim,max77650-regulator + +patternProperties: + "^regulator@[0-3]$": + $ref: "regulator.yaml#" + +required: + - compatible