[09/12] t5520: test single-line files by git with test_cmp
diff mbox series

Message ID f1b515fc0ed431f03244eefbe9f8f34921f4c62d.1571354136.git.liu.denton@gmail.com
State New
Headers show
Series
  • t5520: various test cleanup
Related show

Commit Message

Denton Liu Oct. 17, 2019, 11:17 p.m. UTC
In case an invocation of a Git command fails within the subshell, the
failure will be masked. Replace the subshell with a file-redirection and
a call to test_cmp.

This change was done with the following GNU sed expressions:

	s/\(\s*\)test \([^ ]*\) = "$(\(git [^)]*\))"/\1echo \2 >expect \&\&\n\1\3 >actual \&\&\n\1test_cmp expect actual/
	s/\(\s*\)test "$(\(git [^)]*\))" = \([^ ]*\)/\1echo \3 >expect \&\&\n\1\2 >actual \&\&\n\1test_cmp expect actual/

Signed-off-by: Denton Liu <liu.denton@gmail.com>
---
 t/t5520-pull.sh | 64 ++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 48 insertions(+), 16 deletions(-)

Comments

Eric Sunshine Oct. 17, 2019, 11:49 p.m. UTC | #1
On Thu, Oct 17, 2019 at 7:17 PM Denton Liu <liu.denton@gmail.com> wrote:
> In case an invocation of a Git command fails within the subshell, the
> failure will be masked. Replace the subshell with a file-redirection and
> a call to test_cmp.
>
> Signed-off-by: Denton Liu <liu.denton@gmail.com>
> ---
> diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
> @@ -622,10 +648,16 @@ test_expect_success 'pull --rebase fails on unborn branch with staged changes' '
>                 git add staged-file &&
> -               test "$(git ls-files)" = staged-file &&
> +               echo staged-file >expect &&
> +               git ls-files >actual &&
> +               test_cmp expect actual &&
>                 test_must_fail git pull --rebase .. master 2>err &&
> -               test "$(git ls-files)" = staged-file &&
> -               test "$(git show :staged-file)" = staged-file &&
> +               echo staged-file >expect &&
> +               git ls-files >actual &&
> +               test_cmp expect actual &&
> +               echo staged-file >expect &&
> +               git show :staged-file >actual &&
> +               test_cmp expect actual &&

Nit: I'm not convinced that it makes sense to re-create the "expect"
file with the exact same content repeatedly in this one test. There is
some value in creating the file once and then _using_ it repeatedly
since that shows intent that the the result of these various commands
is not expected to change.

Patch
diff mbox series

diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
index f11fadc075..0eebab7d86 100755
--- a/t/t5520-pull.sh
+++ b/t/t5520-pull.sh
@@ -255,7 +255,9 @@  test_expect_success '--rebase' '
 	git tag before-rebase &&
 	git pull --rebase . copy &&
 	test_cmp_rev HEAD^ copy &&
-	test new = "$(git show HEAD:file2)"
+	echo new >expect &&
+	git show HEAD:file2 >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success '--rebase fast forward' '
@@ -330,7 +332,9 @@  test_expect_success '--rebase fails with multiple branches' '
 	test_must_fail git pull --rebase . copy master 2>err &&
 	test_cmp_rev HEAD before-rebase &&
 	test_i18ngrep "Cannot rebase onto multiple branches" err &&
-	test modified = "$(git show HEAD:file)"
+	echo modified >expect &&
+	git show HEAD:file >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success 'pull --rebase succeeds with dirty working directory and rebase.autostash set' '
@@ -381,7 +385,9 @@  test_expect_success 'pull.rebase' '
 	test_config pull.rebase true &&
 	git pull . copy &&
 	test_cmp_rev HEAD^ copy &&
-	test new = "$(git show HEAD:file2)"
+	echo new >expect &&
+	git show HEAD:file2 >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success 'pull --autostash & pull.rebase=true' '
@@ -399,7 +405,9 @@  test_expect_success 'branch.to-rebase.rebase' '
 	test_config branch.to-rebase.rebase true &&
 	git pull . copy &&
 	test_cmp_rev HEAD^ copy &&
-	test new = "$(git show HEAD:file2)"
+	echo new >expect &&
+	git show HEAD:file2 >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success 'branch.to-rebase.rebase should override pull.rebase' '
@@ -408,14 +416,18 @@  test_expect_success 'branch.to-rebase.rebase should override pull.rebase' '
 	test_config branch.to-rebase.rebase false &&
 	git pull . copy &&
 	test_must_fail test_cmp_rev HEAD^ copy &&
-	test new = "$(git show HEAD:file2)"
+	echo new >expect &&
+	git show HEAD:file2 >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success 'pull --rebase warns on --verify-signatures' '
 	git reset --hard before-rebase &&
 	git pull --rebase --verify-signatures . copy 2>err &&
 	test_cmp_rev HEAD^ copy &&
-	test new = "$(git show HEAD:file2)" &&
+	echo new >expect &&
+	git show HEAD:file2 >actual &&
+	test_cmp expect actual &&
 	test_i18ngrep "ignoring --verify-signatures for rebase" err
 '
 
@@ -423,7 +435,9 @@  test_expect_success 'pull --rebase does not warn on --no-verify-signatures' '
 	git reset --hard before-rebase &&
 	git pull --rebase --no-verify-signatures . copy 2>err &&
 	test_cmp_rev HEAD^ copy &&
-	test new = "$(git show HEAD:file2)" &&
+	echo new >expect &&
+	git show HEAD:file2 >actual &&
+	test_cmp expect actual &&
 	test_i18ngrep ! "verify-signatures" err
 '
 
@@ -445,7 +459,9 @@  test_expect_success 'pull.rebase=false create a new merge commit' '
 	git pull . copy &&
 	test_cmp_rev HEAD^1 before-preserve-rebase &&
 	test_cmp_rev HEAD^2 copy &&
-	test file3 = "$(git show HEAD:file3.t)"
+	echo file3 >expect &&
+	git show HEAD:file3.t >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success 'pull.rebase=true flattens keep-merge' '
@@ -453,7 +469,9 @@  test_expect_success 'pull.rebase=true flattens keep-merge' '
 	test_config pull.rebase true &&
 	git pull . copy &&
 	test_cmp_rev HEAD^^ copy &&
-	test file3 = "$(git show HEAD:file3.t)"
+	echo file3 >expect &&
+	git show HEAD:file3.t >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success 'pull.rebase=1 is treated as true and flattens keep-merge' '
@@ -461,7 +479,9 @@  test_expect_success 'pull.rebase=1 is treated as true and flattens keep-merge' '
 	test_config pull.rebase 1 &&
 	git pull . copy &&
 	test_cmp_rev HEAD^^ copy &&
-	test file3 = "$(git show HEAD:file3.t)"
+	echo file3 >expect &&
+	git show HEAD:file3.t >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success REBASE_P \
@@ -507,7 +527,9 @@  test_expect_success '--rebase=false create a new merge commit' '
 	git pull --rebase=false . copy &&
 	test_cmp_rev HEAD^1 before-preserve-rebase &&
 	test_cmp_rev HEAD^2 copy &&
-	test file3 = "$(git show HEAD:file3.t)"
+	echo file3 >expect &&
+	git show HEAD:file3.t >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success '--rebase=true rebases and flattens keep-merge' '
@@ -515,7 +537,9 @@  test_expect_success '--rebase=true rebases and flattens keep-merge' '
 	test_config pull.rebase preserve &&
 	git pull --rebase=true . copy &&
 	test_cmp_rev HEAD^^ copy &&
-	test file3 = "$(git show HEAD:file3.t)"
+	echo file3 >expect &&
+	git show HEAD:file3.t >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success REBASE_P \
@@ -537,7 +561,9 @@  test_expect_success '--rebase overrides pull.rebase=preserve and flattens keep-m
 	test_config pull.rebase preserve &&
 	git pull --rebase . copy &&
 	test_cmp_rev HEAD^^ copy &&
-	test file3 = "$(git show HEAD:file3.t)"
+	echo file3 >expect &&
+	git show HEAD:file3.t >actual &&
+	test_cmp expect actual
 '
 
 test_expect_success '--rebase with rebased upstream' '
@@ -622,10 +648,16 @@  test_expect_success 'pull --rebase fails on unborn branch with staged changes' '
 		cd empty_repo2 &&
 		echo staged-file >staged-file &&
 		git add staged-file &&
-		test "$(git ls-files)" = staged-file &&
+		echo staged-file >expect &&
+		git ls-files >actual &&
+		test_cmp expect actual &&
 		test_must_fail git pull --rebase .. master 2>err &&
-		test "$(git ls-files)" = staged-file &&
-		test "$(git show :staged-file)" = staged-file &&
+		echo staged-file >expect &&
+		git ls-files >actual &&
+		test_cmp expect actual &&
+		echo staged-file >expect &&
+		git show :staged-file >actual &&
+		test_cmp expect actual &&
 		test_i18ngrep "unborn branch with changes added to the index" err
 	)
 '