dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
diff mbox series

Message ID 1571387954-23446-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series
  • dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
Related show

Commit Message

Yoshihiro Shimoda Oct. 18, 2019, 8:39 a.m. UTC
Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
to json-schema.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 --------------
 .../devicetree/bindings/phy/renesas,usb3-phy.yaml  | 80 ++++++++++++++++++++++
 2 files changed, 80 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml

Comments

Rob Herring Oct. 29, 2019, 1:58 a.m. UTC | #1
On Fri, Oct 18, 2019 at 05:39:14PM +0900, Yoshihiro Shimoda wrote:
> Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
> to json-schema.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
>  .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 --------------
>  .../devicetree/bindings/phy/renesas,usb3-phy.yaml  | 80 ++++++++++++++++++++++
>  2 files changed, 80 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
> deleted file mode 100644
> index 0fe433b..00000000
> --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -* Renesas R-Car generation 3 USB 3.0 PHY
> -
> -This file provides information on what the device node for the R-Car generation
> -3 and RZ/G2 USB 3.0 PHY contain.
> -If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
> -instead of USB3_CLK. However, if you don't want to these features, you don't
> -need this driver.
> -
> -Required properties:
> -- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
> -	      SoC.
> -	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
> -	      SoC.
> -	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
> -	      SoC.
> -	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
> -	      SoC.
> -	      "renesas,r8a77965-usb3-phy" if the device is a part of an
> -	      R8A77965 SoC.
> -	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
> -	      compatible device.
> -
> -	      When compatible with the generic version, nodes must list the
> -	      SoC-specific version corresponding to the platform first
> -	      followed by the generic version.
> -
> -- reg: offset and length of the USB 3.0 PHY register block.
> -- clocks: A list of phandles and clock-specifier pairs.
> -- clock-names: Name of the clocks.
> -  - The funcional clock must be "usb3-if".
> -  - The usb3's external clock must be "usb3s_clk".
> -  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
> -    the clock-frequency must not be 0.
> -- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
> -
> -Optional properties:
> -- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
> -		     the following values as u32:
> -			- 0 (or the property doesn't exist): disable the ssc
> -			- 4980: enable the ssc as -4980 ppm
> -			- 4492: enable the ssc as -4492 ppm
> -			- 4003: enable the ssc as -4003 ppm
> -
> -Example (R-Car H3):
> -
> -	usb-phy@e65ee000 {
> -		compatible = "renesas,r8a7795-usb3-phy",
> -			     "renesas,rcar-gen3-usb3-phy";
> -		reg = <0 0xe65ee000 0 0x90>;
> -		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
> -		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> new file mode 100644
> index 00000000..42239e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car generation 3 USB 3.0 PHY
> +
> +maintainers:
> +  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> +
> +properties:
> +  compatible:
> +    oneOf:

Don't need the oneOf here.

> +      - items:
> +          - enum:
> +              - renesas,r8a774a1-usb3-phy # RZ/G2M
> +              - renesas,r8a774b1-usb3-phy # RZ/G2N
> +              - renesas,r8a7795-usb3-phy  # R-Car H3
> +              - renesas,r8a7796-usb3-phy  # R-Car M3-W
> +              - renesas,r8a77965-usb3-phy # R-Car M3-N
> +          - const: renesas,rcar-gen3-usb3-phy
> +
> +  reg:
> +    # base address and length of the registers block for the PHY.
> +    maxItems: 1
> +
> +  clocks:
> +    # A list of phandles and clock-specifier pairs.
> +    maxItems: 3
> +
> +  clock-names:
> +    # If you want to use the ssc, the clock-frequency of usb_extal
> +    # must not be 0.
> +    maxItems: 3
> +    items:
> +      - const: usb3-if # The funcional clock
> +      - const: usb3s_clk # The usb3's external clock
> +      - const: usb_extal # The usb2's external clock
> +
> +  '#phy-cells':
> +    # see phy-bindings.txt in the same directory
> +    const: 0
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  renesas,ssc-range:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Enable/disable spread spectrum clock (ssc) by using the following values
> +       - 0 (or the property doesn't exist): disable the ssc
> +       - 4980: enable the ssc as -4980 ppm
> +       - 4492: enable the ssc as -4492 ppm
> +       - 4003: enable the ssc as -4003 ppm

Make these values a schema. You'll need the $ref under an 'allOf' when 
you do.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> +    #include <dt-bindings/power/r8a7795-sysc.h>
> +
> +    usb-phy@e65ee000 {
> +        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
> +        reg = <0 0xe65ee000 0 0x90>;
> +        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
> +        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
> +        #phy-cells = <0>;
> +    };
> -- 
> 2.7.4
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@ 
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,r8a77965-usb3-phy" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
-  - The funcional clock must be "usb3-if".
-  - The usb3's external clock must be "usb3s_clk".
-  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
-    the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
-		     the following values as u32:
-			- 0 (or the property doesn't exist): disable the ssc
-			- 4980: enable the ssc as -4980 ppm
-			- 4492: enable the ssc as -4492 ppm
-			- 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
-	usb-phy@e65ee000 {
-		compatible = "renesas,r8a7795-usb3-phy",
-			     "renesas,rcar-gen3-usb3-phy";
-		reg = <0 0xe65ee000 0 0x90>;
-		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
-		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 00000000..42239e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-usb3-phy # RZ/G2M
+              - renesas,r8a774b1-usb3-phy # RZ/G2N
+              - renesas,r8a7795-usb3-phy  # R-Car H3
+              - renesas,r8a7796-usb3-phy  # R-Car M3-W
+              - renesas,r8a77965-usb3-phy # R-Car M3-N
+          - const: renesas,rcar-gen3-usb3-phy
+
+  reg:
+    # base address and length of the registers block for the PHY.
+    maxItems: 1
+
+  clocks:
+    # A list of phandles and clock-specifier pairs.
+    maxItems: 3
+
+  clock-names:
+    # If you want to use the ssc, the clock-frequency of usb_extal
+    # must not be 0.
+    maxItems: 3
+    items:
+      - const: usb3-if # The funcional clock
+      - const: usb3s_clk # The usb3's external clock
+      - const: usb_extal # The usb2's external clock
+
+  '#phy-cells':
+    # see phy-bindings.txt in the same directory
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,ssc-range:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Enable/disable spread spectrum clock (ssc) by using the following values
+       - 0 (or the property doesn't exist): disable the ssc
+       - 4980: enable the ssc as -4980 ppm
+       - 4492: enable the ssc as -4492 ppm
+       - 4003: enable the ssc as -4003 ppm
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@e65ee000 {
+        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+        reg = <0 0xe65ee000 0 0x90>;
+        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+        #phy-cells = <0>;
+    };