[38/46] video: backlight: tosa: use gpio lookup table
diff mbox series

Message ID 20191018154201.1276638-38-arnd@arndb.de
State New
Headers show
Series
  • ARM: pxa: towards multiplatform support
Related show

Commit Message

Arnd Bergmann Oct. 18, 2019, 3:41 p.m. UTC
The driver should not require a machine specific header. Change
it to pass the gpio line through a lookup table, and move the
timing generator definitions into the drivers itself.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
I'm not overly confident that I got the correct device names
for the lookup table, it would be good if someone could
double-check.
---
 arch/arm/mach-pxa/include/mach/tosa.h | 15 --------------
 arch/arm/mach-pxa/tosa.c              | 22 +++++++++++++++++++++
 drivers/video/backlight/tosa_bl.c     | 10 +++++-----
 drivers/video/backlight/tosa_bl.h     |  8 ++++++++
 drivers/video/backlight/tosa_lcd.c    | 28 ++++++++++++++++++++-------
 5 files changed, 56 insertions(+), 27 deletions(-)
 create mode 100644 drivers/video/backlight/tosa_bl.h

Comments

Robert Jarzmik Oct. 30, 2019, 9:10 p.m. UTC | #1
Arnd Bergmann <arnd@arndb.de> writes:

> The driver should not require a machine specific header. Change
> it to pass the gpio line through a lookup table, and move the
> timing generator definitions into the drivers itself.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-fbdev@vger.kernel.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> ---
> I'm not overly confident that I got the correct device names
> for the lookup table, it would be good if someone could
> double-check.
Ah the I2C and SPI devices querrying GPIOs ... unless someone does an actual
test, this will probably be very regression prone ...

Anyway :
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

Cheers.

--
Robert
Linus Walleij Nov. 5, 2019, 10:04 a.m. UTC | #2
On Fri, Oct 18, 2019 at 5:43 PM Arnd Bergmann <arnd@arndb.de> wrote:

> The driver should not require a machine specific header. Change
> it to pass the gpio line through a lookup table, and move the
> timing generator definitions into the drivers itself.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-fbdev@vger.kernel.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> ---
> I'm not overly confident that I got the correct device names
> for the lookup table, it would be good if someone could
> double-check.

You're anyway doing more than required for the people who
may or may not be using this platform. Brokenness can surely
be fixed later, it's not like we are taking down the entire Amazon
cloud or something.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Daniel Thompson Nov. 5, 2019, 10:17 a.m. UTC | #3
On Tue, Nov 05, 2019 at 11:04:44AM +0100, Linus Walleij wrote:
> On Fri, Oct 18, 2019 at 5:43 PM Arnd Bergmann <arnd@arndb.de> wrote:
> 
> > The driver should not require a machine specific header. Change
> > it to pass the gpio line through a lookup table, and move the
> > timing generator definitions into the drivers itself.
> >
> > Cc: Lee Jones <lee.jones@linaro.org>
> > Cc: Daniel Thompson <daniel.thompson@linaro.org>
> > Cc: Jingoo Han <jingoohan1@gmail.com>
> > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > Cc: dri-devel@lists.freedesktop.org
> > Cc: linux-fbdev@vger.kernel.org
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> >
> > ---
> > I'm not overly confident that I got the correct device names
> > for the lookup table, it would be good if someone could
> > double-check.
> 
> You're anyway doing more than required for the people who
> may or may not be using this platform. Brokenness can surely
> be fixed later, it's not like we are taking down the entire Amazon
> cloud or something.
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Same here. I read, I did't see anything wrong but I can't test.

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.
Lee Jones Nov. 11, 2019, 9:30 a.m. UTC | #4
On Fri, 18 Oct 2019, Arnd Bergmann wrote:

> The driver should not require a machine specific header. Change
> it to pass the gpio line through a lookup table, and move the
> timing generator definitions into the drivers itself.
> 
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-fbdev@vger.kernel.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> ---
> I'm not overly confident that I got the correct device names
> for the lookup table, it would be good if someone could
> double-check.
> ---
>  arch/arm/mach-pxa/include/mach/tosa.h | 15 --------------
>  arch/arm/mach-pxa/tosa.c              | 22 +++++++++++++++++++++
>  drivers/video/backlight/tosa_bl.c     | 10 +++++-----
>  drivers/video/backlight/tosa_bl.h     |  8 ++++++++
>  drivers/video/backlight/tosa_lcd.c    | 28 ++++++++++++++++++++-------
>  5 files changed, 56 insertions(+), 27 deletions(-)
>  create mode 100644 drivers/video/backlight/tosa_bl.h

Applied, thanks.

Patch
diff mbox series

diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index a499ed17931e..8bfaca3a8b64 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -72,18 +72,6 @@ 
 #define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
 #define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
 
-/*
- * Timing Generator
- */
-#define TG_PNLCTL 			0x00
-#define TG_TPOSCTL 			0x01
-#define TG_DUTYCTL 			0x02
-#define TG_GPOSR 			0x03
-#define TG_GPODR1 			0x04
-#define TG_GPODR2 			0x05
-#define TG_PINICTL 			0x06
-#define TG_HPOSCTL 			0x07
-
 /*
  * PXA GPIOs
  */
@@ -192,7 +180,4 @@ 
 #define TOSA_KEY_MAIL		KEY_MAIL
 #endif
 
-struct spi_device;
-extern int tosa_bl_enable(struct spi_device *spi, int enable);
-
 #endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 9a7f1e42adac..8329a2969b2b 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -813,6 +813,26 @@  static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 
+static struct gpiod_lookup_table tosa_lcd_gpio_table = {
+	.dev_id = "spi2.0",
+	.table = {
+		GPIO_LOOKUP("tc6393xb",
+			    TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE,
+			    "tg #pwr", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = {
+	.dev_id = "i2c-tosa-bl",
+	.table = {
+		GPIO_LOOKUP("tc6393xb",
+			    TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE,
+			    "backlight", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct spi_board_info spi_board_info[] __initdata = {
 	{
 		.modalias	= "tosa-lcd",
@@ -935,6 +955,8 @@  static void __init tosa_init(void)
 	platform_scoop_config = &tosa_pcmcia_config;
 
 	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+	gpiod_add_lookup_table(&tosa_lcd_gpio_table);
+	gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index 1275e815bd86..cff5e96fd988 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -18,7 +18,7 @@ 
 
 #include <asm/mach/sharpsl_param.h>
 
-#include <mach/tosa.h>
+#include "tosa_bl.h"
 
 #define COMADJ_DEFAULT	97
 
@@ -28,6 +28,7 @@ 
 struct tosa_bl_data {
 	struct i2c_client *i2c;
 	struct backlight_device *bl;
+	struct gpio_desc *gpio;
 
 	int comadj;
 };
@@ -42,7 +43,7 @@  static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
 	i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
 
 	/* SetBacklightVR */
-	gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
+	gpiod_set_value(data->gpio, brightness & 0x100);
 
 	tosa_bl_enable(spi, brightness);
 }
@@ -87,9 +88,8 @@  static int tosa_bl_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
-
-	ret = devm_gpio_request_one(&client->dev, TOSA_GPIO_BL_C20MA,
-				GPIOF_OUT_INIT_LOW, "backlight");
+	data->gpio = devm_gpiod_get(&client->dev, "backlight", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(data->gpio);
 	if (ret) {
 		dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
 		return ret;
diff --git a/drivers/video/backlight/tosa_bl.h b/drivers/video/backlight/tosa_bl.h
new file mode 100644
index 000000000000..589e17e6fdb2
--- /dev/null
+++ b/drivers/video/backlight/tosa_bl.h
@@ -0,0 +1,8 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _TOSA_BL_H
+#define _TOSA_BL_H
+
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
+#endif
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 29af8e27b6e5..e8ab583e5098 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -19,7 +19,7 @@ 
 
 #include <asm/mach/sharpsl_param.h>
 
-#include <mach/tosa.h>
+#include "tosa_bl.h"
 
 #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 
@@ -28,12 +28,26 @@ 
 #define TG_REG0_UD	0x0004
 #define TG_REG0_LR	0x0008
 
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 	0x00
+#define TG_TPOSCTL 	0x01
+#define TG_DUTYCTL 	0x02
+#define TG_GPOSR 	0x03
+#define TG_GPODR1 	0x04
+#define TG_GPODR2 	0x05
+#define TG_PINICTL 	0x06
+#define TG_HPOSCTL 	0x07
+
+
 #define	DAC_BASE	0x4e
 
 struct tosa_lcd_data {
 	struct spi_device *spi;
 	struct lcd_device *lcd;
 	struct i2c_client *i2c;
+	struct gpio_desc *gpiod_tg;
 
 	int lcd_power;
 	bool is_vga;
@@ -66,7 +80,7 @@  EXPORT_SYMBOL(tosa_bl_enable);
 static void tosa_lcd_tg_init(struct tosa_lcd_data *data)
 {
 	/* TG on */
-	gpio_set_value(TOSA_GPIO_TG_ON, 0);
+	gpiod_set_value(data->gpiod_tg, 0);
 
 	mdelay(60);
 
@@ -100,6 +114,7 @@  static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
 		 */
 		struct i2c_adapter *adap = i2c_get_adapter(0);
 		struct i2c_board_info info = {
+			.dev_name = "tosa-bl",
 			.type	= "tosa-bl",
 			.addr	= DAC_BASE,
 			.platform_data = data->spi,
@@ -121,7 +136,7 @@  static void tosa_lcd_tg_off(struct tosa_lcd_data *data)
 	mdelay(50);
 
 	/* TG Off */
-	gpio_set_value(TOSA_GPIO_TG_ON, 1);
+	gpiod_set_value(data->gpiod_tg, 1);
 	mdelay(100);
 }
 
@@ -191,10 +206,9 @@  static int tosa_lcd_probe(struct spi_device *spi)
 	data->spi = spi;
 	spi_set_drvdata(spi, data);
 
-	ret = devm_gpio_request_one(&spi->dev, TOSA_GPIO_TG_ON,
-				GPIOF_OUT_INIT_LOW, "tg #pwr");
-	if (ret < 0)
-		return ret;
+	data->gpiod_tg = devm_gpiod_get(&spi->dev, "tg #pwr", GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpiod_tg))
+		return PTR_ERR(data->gpiod_tg);
 
 	mdelay(60);