[3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
diff mbox series

Message ID 1571631083-4962-4-git-send-email-jeff@labundy.com
State New
Headers show
Series
  • Add support for Azoteq IQS620A/621/622/624/625
Related show

Commit Message

Jeff LaBundy Oct. 21, 2019, 4:11 a.m. UTC
This patch adds touch key support for six-channel members of the
Azoteq ProxFusion family of sensor devices.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
 drivers/input/keyboard/Kconfig       |  10 ++
 drivers/input/keyboard/Makefile      |   1 +
 drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
 3 files changed, 351 insertions(+)
 create mode 100644 drivers/input/keyboard/iqs62x-keys.c

Comments

Dmitry Torokhov Oct. 23, 2019, 12:22 a.m. UTC | #1
Hi Jeff,

On Sun, Oct 20, 2019 at 11:11:18PM -0500, Jeff LaBundy wrote:
> This patch adds touch key support for six-channel members of the
> Azoteq ProxFusion family of sensor devices.
> 
> Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> ---
>  drivers/input/keyboard/Kconfig       |  10 ++
>  drivers/input/keyboard/Makefile      |   1 +
>  drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
>  3 files changed, 351 insertions(+)
>  create mode 100644 drivers/input/keyboard/iqs62x-keys.c
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 8911bc2..ab10aff 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -657,6 +657,16 @@ config KEYBOARD_IPAQ_MICRO
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ipaq-micro-keys.
>  
> +config KEYBOARD_IQS62X
> +	tristate "Azoteq IQS620A/621/622/624/625 touch keys"
> +	depends on MFD_IQS62X
> +	help
> +	  Say Y here to enable touch-key support for six-channel members of
> +	  the Azoteq ProxFusion family of sensor devices.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called iqs62x-keys.
> +
>  config KEYBOARD_OMAP
>  	tristate "TI OMAP keypad support"
>  	depends on ARCH_OMAP1
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 9510325..ee85b7f 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
>  obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
>  obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
>  obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
> +obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
>  obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
>  obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
>  obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
> diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
> new file mode 100644
> index 0000000..9d929f1
> --- /dev/null
> +++ b/drivers/input/keyboard/iqs62x-keys.c
> @@ -0,0 +1,340 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Azoteq IQS620A/621/622/624/625 Touch Keys
> + *
> + * Copyright (C) 2019
> + * Author: Jeff LaBundy <jeff@labundy.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/iqs62x.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +enum {
> +	IQS62X_SW_HALL_N,
> +	IQS62X_SW_HALL_S,
> +};
> +
> +static const char * const iqs62x_switch_names[] = {
> +	[IQS62X_SW_HALL_N] = "hall_switch_north",
> +	[IQS62X_SW_HALL_S] = "hall_switch_south",
> +};
> +
> +struct iqs62x_switch_desc {
> +	enum iqs62x_event_flag flag;
> +	unsigned int code;
> +	bool enabled;
> +};
> +
> +struct iqs62x_keys_private {
> +	struct iqs62x_core *iqs62x;
> +	struct input_dev *input;
> +	struct notifier_block notifier;
> +	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
> +	unsigned int keycode[IQS62X_NUM_KEYS];
> +	unsigned int keycodemax;
> +	u8 interval;
> +};
> +
> +static int iqs62x_keys_parse_prop(struct platform_device *pdev,
> +				  struct iqs62x_keys_private *iqs62x_keys)
> +{
> +	struct device_node *keys_node = pdev->dev.of_node;
> +	struct device_node *hall_node;
> +	unsigned int val;
> +	int ret, i;
> +
> +	if (!keys_node)
> +		return 0;
> +
> +	ret = of_property_read_variable_u32_array(keys_node, "linux,keycodes",
> +						  iqs62x_keys->keycode, 0,
> +						  IQS62X_NUM_KEYS);

I do not think this has to be OF-specific, so please use
device_property_*() API.

> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
> +		return ret;
> +	}
> +	iqs62x_keys->keycodemax = ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> +		hall_node = of_get_child_by_name(keys_node,
> +						 iqs62x_switch_names[i]);
> +		if (!hall_node)
> +			continue;
> +
> +		ret = of_property_read_u32(hall_node, "linux,code", &val);
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
> +				ret);
> +			of_node_put(hall_node);
> +			return ret;
> +		}
> +
> +		if (of_property_read_bool(hall_node, "azoteq,use-prox"))
> +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> +							 IQS62X_EVENT_HALL_N_P :
> +							 IQS62X_EVENT_HALL_S_P);
> +		else
> +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> +							 IQS62X_EVENT_HALL_N_T :
> +							 IQS62X_EVENT_HALL_S_T);
> +
> +		iqs62x_keys->switches[i].code = val;
> +		iqs62x_keys->switches[i].enabled = true;
> +
> +		of_node_put(hall_node);
> +	}
> +
> +	return 0;
> +}
> +
> +static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
> +{
> +	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
> +	enum iqs62x_event_flag flag;
> +	unsigned int event_mask_reg;
> +	unsigned int event_mask = 0;
> +	unsigned int val;
> +	int error, i;
> +
> +	switch (iqs62x->dev_desc->prod_num) {
> +	case IQS620_PROD_NUM:
> +	case IQS621_PROD_NUM:
> +	case IQS622_PROD_NUM:
> +		event_mask_reg = IQS620_GLBL_EVENT_MASK;
> +
> +		/*
> +		 * Discreet button, hysteresis and SAR UI flags represent keys
> +		 * and are unmasked if mapped to a valid keycode.
> +		 */
> +		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> +			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
> +				continue;
> +
> +			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
> +				event_mask |= iqs62x->dev_desc->prox_mask;
> +			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
> +				event_mask |= (iqs62x->dev_desc->hyst_mask |
> +					       iqs62x->dev_desc->sar_mask);
> +		}
> +
> +		error = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
> +				    &val);
> +		if (error)
> +			return error;
> +
> +		/*
> +		 * Hall UI flags represent switches and are unmasked if their
> +		 * corresponding child nodes are present.
> +		 */
> +		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> +			if (!(iqs62x_keys->switches[i].enabled))
> +				continue;
> +
> +			flag = iqs62x_keys->switches[i].flag;
> +
> +			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
> +				continue;
> +
> +			event_mask |= iqs62x->dev_desc->hall_mask;
> +
> +			input_report_switch(iqs62x_keys->input,
> +					    iqs62x_keys->switches[i].code,
> +					    (val & iqs62x_events[flag].mask) ==
> +					    iqs62x_events[flag].val);
> +		}
> +
> +		input_sync(iqs62x_keys->input);
> +		break;
> +
> +	case IQS624_PROD_NUM:
> +		event_mask_reg = IQS624_HALL_UI;
> +
> +		/*
> +		 * Interval change events represent keys and are unmasked if
> +		 * either wheel movement flag is mapped to a valid keycode.
> +		 */
> +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
> +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> +
> +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
> +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> +
> +		error = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> +				    &val);
> +		if (error)
> +			return error;
> +
> +		iqs62x_keys->interval = val;
> +		break;
> +
> +	default:
> +		return 0;
> +	}
> +
> +	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
> +}
> +
> +static int iqs62x_keys_notifier(struct notifier_block *notifier,
> +				unsigned long event_flags, void *context)
> +{
> +	struct iqs62x_event_data *event_data = context;
> +	struct iqs62x_keys_private *iqs62x_keys;
> +	int error, i;
> +
> +	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
> +				   notifier);
> +
> +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> +		error = iqs62x_keys_init(iqs62x_keys);
> +		if (error) {
> +			dev_err(iqs62x_keys->input->dev.parent,
> +				"Failed to re-initialize device: %d\n", error);
> +			return NOTIFY_BAD;
> +		}
> +
> +		return NOTIFY_OK;
> +	}
> +
> +	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> +		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
> +		    event_data->interval == iqs62x_keys->interval)
> +			continue;
> +
> +		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
> +				 event_flags & BIT(i));
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> +		if (iqs62x_keys->switches[i].enabled)
> +			input_report_switch(iqs62x_keys->input,
> +					    iqs62x_keys->switches[i].code,
> +					    event_flags &
> +					    BIT(iqs62x_keys->switches[i].flag));
> +
> +	input_sync(iqs62x_keys->input);
> +
> +	if (event_data->interval == iqs62x_keys->interval)
> +		return NOTIFY_OK;
> +
> +	/*
> +	 * Each frame contains at most one wheel event (up or down), in which
> +	 * case a full keystroke is emulated.
> +	 */
> +	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
> +		input_report_key(iqs62x_keys->input,
> +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
> +				 0);
> +		input_sync(iqs62x_keys->input);
> +	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
> +		input_report_key(iqs62x_keys->input,
> +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
> +				 0);

Not '1'?

> +		input_sync(iqs62x_keys->input);
> +	}
> +
> +	iqs62x_keys->interval = event_data->interval;
> +
> +	return NOTIFY_OK;
> +}
> +
> +static int iqs62x_keys_probe(struct platform_device *pdev)
> +{
> +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> +	struct iqs62x_keys_private *iqs62x_keys;
> +	struct input_dev *input;
> +	int error, i;
> +
> +	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
> +				   GFP_KERNEL);
> +	if (!iqs62x_keys)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, iqs62x_keys);
> +
> +	error = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
> +	if (error)
> +		return error;
> +
> +	input = devm_input_allocate_device(&pdev->dev);
> +	if (!input)
> +		return -ENOMEM;
> +
> +	input->keycodemax = iqs62x_keys->keycodemax;
> +	input->keycode = iqs62x_keys->keycode;
> +	input->keycodesize = sizeof(*iqs62x_keys->keycode);
> +
> +	input->name = iqs62x->dev_desc->dev_name;
> +	input->id.bustype = BUS_I2C;
> +
> +	__set_bit(EV_KEY, input->evbit);
> +
> +	for (i = 0; i < iqs62x_keys->keycodemax; i++)
> +		__set_bit(iqs62x_keys->keycode[i], input->keybit);
> +
> +	__clear_bit(KEY_RESERVED, input->keybit);
> +
> +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> +		if (iqs62x_keys->switches[i].enabled) {
> +			__set_bit(EV_SW, input->evbit);
> +			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
> +		}
> +
> +	iqs62x_keys->iqs62x = iqs62x;
> +	iqs62x_keys->input = input;
> +
> +	error = iqs62x_keys_init(iqs62x_keys);
> +	if (error) {
> +		dev_err(&pdev->dev, "Failed to initialize device: %d\n", error);
> +		return error;
> +	}
> +
> +	error = input_register_device(iqs62x_keys->input);
> +	if (error) {
> +		dev_err(&pdev->dev, "Failed to register device: %d\n", error);
> +		return error;
> +	}
> +
> +	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
> +	error = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
> +						 &iqs62x_keys->notifier);
> +	if (error)
> +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", error);
> +
> +	return error;
> +}
> +
> +static int iqs62x_keys_remove(struct platform_device *pdev)
> +{
> +	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
> +	int error;
> +
> +	error = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
> +						   &iqs62x_keys->notifier);
> +	if (error)
> +		dev_err(&pdev->dev,
> +			"Failed to unregister notifier: %d\n", error);
> +
> +	return error;
> +}
> +
> +static struct platform_driver iqs62x_keys_platform_driver = {
> +	.driver = {
> +		.name	= IQS62X_DRV_NAME_KEYS,
> +	},
> +	.probe		= iqs62x_keys_probe,
> +	.remove		= iqs62x_keys_remove,
> +};
> +module_platform_driver(iqs62x_keys_platform_driver);
> +
> +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> +MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Touch Keys");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);
> -- 
> 2.7.4
> 

Thanks.
Jeff LaBundy Oct. 23, 2019, 1:29 a.m. UTC | #2
Hi Dmitry,

Thank you for your prompt review.

On Tue, Oct 22, 2019 at 05:22:54PM -0700, Dmitry Torokhov wrote:
> Hi Jeff,
> 
> On Sun, Oct 20, 2019 at 11:11:18PM -0500, Jeff LaBundy wrote:
> > This patch adds touch key support for six-channel members of the
> > Azoteq ProxFusion family of sensor devices.
> > 
> > Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> > ---
> >  drivers/input/keyboard/Kconfig       |  10 ++
> >  drivers/input/keyboard/Makefile      |   1 +
> >  drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 351 insertions(+)
> >  create mode 100644 drivers/input/keyboard/iqs62x-keys.c
> > 
> > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> > index 8911bc2..ab10aff 100644
> > --- a/drivers/input/keyboard/Kconfig
> > +++ b/drivers/input/keyboard/Kconfig
> > @@ -657,6 +657,16 @@ config KEYBOARD_IPAQ_MICRO
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called ipaq-micro-keys.
> >  
> > +config KEYBOARD_IQS62X
> > +	tristate "Azoteq IQS620A/621/622/624/625 touch keys"
> > +	depends on MFD_IQS62X
> > +	help
> > +	  Say Y here to enable touch-key support for six-channel members of
> > +	  the Azoteq ProxFusion family of sensor devices.
> > +
> > +	  To compile this driver as a module, choose M here: the module will
> > +	  be called iqs62x-keys.
> > +
> >  config KEYBOARD_OMAP
> >  	tristate "TI OMAP keypad support"
> >  	depends on ARCH_OMAP1
> > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> > index 9510325..ee85b7f 100644
> > --- a/drivers/input/keyboard/Makefile
> > +++ b/drivers/input/keyboard/Makefile
> > @@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
> >  obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
> >  obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
> >  obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
> > +obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
> >  obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
> >  obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
> >  obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
> > diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
> > new file mode 100644
> > index 0000000..9d929f1
> > --- /dev/null
> > +++ b/drivers/input/keyboard/iqs62x-keys.c
> > @@ -0,0 +1,340 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Azoteq IQS620A/621/622/624/625 Touch Keys
> > + *
> > + * Copyright (C) 2019
> > + * Author: Jeff LaBundy <jeff@labundy.com>
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/input.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/iqs62x.h>
> > +#include <linux/module.h>
> > +#include <linux/notifier.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +
> > +enum {
> > +	IQS62X_SW_HALL_N,
> > +	IQS62X_SW_HALL_S,
> > +};
> > +
> > +static const char * const iqs62x_switch_names[] = {
> > +	[IQS62X_SW_HALL_N] = "hall_switch_north",
> > +	[IQS62X_SW_HALL_S] = "hall_switch_south",
> > +};
> > +
> > +struct iqs62x_switch_desc {
> > +	enum iqs62x_event_flag flag;
> > +	unsigned int code;
> > +	bool enabled;
> > +};
> > +
> > +struct iqs62x_keys_private {
> > +	struct iqs62x_core *iqs62x;
> > +	struct input_dev *input;
> > +	struct notifier_block notifier;
> > +	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
> > +	unsigned int keycode[IQS62X_NUM_KEYS];
> > +	unsigned int keycodemax;
> > +	u8 interval;
> > +};
> > +
> > +static int iqs62x_keys_parse_prop(struct platform_device *pdev,
> > +				  struct iqs62x_keys_private *iqs62x_keys)
> > +{
> > +	struct device_node *keys_node = pdev->dev.of_node;
> > +	struct device_node *hall_node;
> > +	unsigned int val;
> > +	int ret, i;
> > +
> > +	if (!keys_node)
> > +		return 0;
> > +
> > +	ret = of_property_read_variable_u32_array(keys_node, "linux,keycodes",
> > +						  iqs62x_keys->keycode, 0,
> > +						  IQS62X_NUM_KEYS);
> 
> I do not think this has to be OF-specific, so please use
> device_property_*() API.
> 

Sure thing; will do.

> > +	if (ret < 0) {
> > +		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
> > +		return ret;
> > +	}
> > +	iqs62x_keys->keycodemax = ret;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> > +		hall_node = of_get_child_by_name(keys_node,
> > +						 iqs62x_switch_names[i]);
> > +		if (!hall_node)
> > +			continue;
> > +
> > +		ret = of_property_read_u32(hall_node, "linux,code", &val);
> > +		if (ret < 0) {
> > +			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
> > +				ret);
> > +			of_node_put(hall_node);
> > +			return ret;
> > +		}
> > +
> > +		if (of_property_read_bool(hall_node, "azoteq,use-prox"))
> > +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> > +							 IQS62X_EVENT_HALL_N_P :
> > +							 IQS62X_EVENT_HALL_S_P);
> > +		else
> > +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> > +							 IQS62X_EVENT_HALL_N_T :
> > +							 IQS62X_EVENT_HALL_S_T);
> > +
> > +		iqs62x_keys->switches[i].code = val;
> > +		iqs62x_keys->switches[i].enabled = true;
> > +
> > +		of_node_put(hall_node);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
> > +{
> > +	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
> > +	enum iqs62x_event_flag flag;
> > +	unsigned int event_mask_reg;
> > +	unsigned int event_mask = 0;
> > +	unsigned int val;
> > +	int error, i;
> > +
> > +	switch (iqs62x->dev_desc->prod_num) {
> > +	case IQS620_PROD_NUM:
> > +	case IQS621_PROD_NUM:
> > +	case IQS622_PROD_NUM:
> > +		event_mask_reg = IQS620_GLBL_EVENT_MASK;
> > +
> > +		/*
> > +		 * Discreet button, hysteresis and SAR UI flags represent keys
> > +		 * and are unmasked if mapped to a valid keycode.
> > +		 */
> > +		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> > +			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
> > +				continue;
> > +
> > +			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
> > +				event_mask |= iqs62x->dev_desc->prox_mask;
> > +			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
> > +				event_mask |= (iqs62x->dev_desc->hyst_mask |
> > +					       iqs62x->dev_desc->sar_mask);
> > +		}
> > +
> > +		error = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
> > +				    &val);
> > +		if (error)
> > +			return error;
> > +
> > +		/*
> > +		 * Hall UI flags represent switches and are unmasked if their
> > +		 * corresponding child nodes are present.
> > +		 */
> > +		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> > +			if (!(iqs62x_keys->switches[i].enabled))
> > +				continue;
> > +
> > +			flag = iqs62x_keys->switches[i].flag;
> > +
> > +			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
> > +				continue;
> > +
> > +			event_mask |= iqs62x->dev_desc->hall_mask;
> > +
> > +			input_report_switch(iqs62x_keys->input,
> > +					    iqs62x_keys->switches[i].code,
> > +					    (val & iqs62x_events[flag].mask) ==
> > +					    iqs62x_events[flag].val);
> > +		}
> > +
> > +		input_sync(iqs62x_keys->input);
> > +		break;
> > +
> > +	case IQS624_PROD_NUM:
> > +		event_mask_reg = IQS624_HALL_UI;
> > +
> > +		/*
> > +		 * Interval change events represent keys and are unmasked if
> > +		 * either wheel movement flag is mapped to a valid keycode.
> > +		 */
> > +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
> > +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> > +
> > +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
> > +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> > +
> > +		error = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> > +				    &val);
> > +		if (error)
> > +			return error;
> > +
> > +		iqs62x_keys->interval = val;
> > +		break;
> > +
> > +	default:
> > +		return 0;
> > +	}
> > +
> > +	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
> > +}
> > +
> > +static int iqs62x_keys_notifier(struct notifier_block *notifier,
> > +				unsigned long event_flags, void *context)
> > +{
> > +	struct iqs62x_event_data *event_data = context;
> > +	struct iqs62x_keys_private *iqs62x_keys;
> > +	int error, i;
> > +
> > +	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
> > +				   notifier);
> > +
> > +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> > +		error = iqs62x_keys_init(iqs62x_keys);
> > +		if (error) {
> > +			dev_err(iqs62x_keys->input->dev.parent,
> > +				"Failed to re-initialize device: %d\n", error);
> > +			return NOTIFY_BAD;
> > +		}
> > +
> > +		return NOTIFY_OK;
> > +	}
> > +
> > +	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> > +		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
> > +		    event_data->interval == iqs62x_keys->interval)
> > +			continue;
> > +
> > +		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
> > +				 event_flags & BIT(i));
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> > +		if (iqs62x_keys->switches[i].enabled)
> > +			input_report_switch(iqs62x_keys->input,
> > +					    iqs62x_keys->switches[i].code,
> > +					    event_flags &
> > +					    BIT(iqs62x_keys->switches[i].flag));
> > +
> > +	input_sync(iqs62x_keys->input);
> > +
> > +	if (event_data->interval == iqs62x_keys->interval)
> > +		return NOTIFY_OK;
> > +
> > +	/*
> > +	 * Each frame contains at most one wheel event (up or down), in which
> > +	 * case a full keystroke is emulated.
> > +	 */
> > +	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
> > +		input_report_key(iqs62x_keys->input,
> > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
> > +				 0);
> > +		input_sync(iqs62x_keys->input);
> > +	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
> > +		input_report_key(iqs62x_keys->input,
> > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
> > +				 0);
> 
> Not '1'?
> 

We pick up the '1' in the first of the two for loops above so long as the wheel
moved "enough." In this case (and this case only), a subsequent '0' is sent to
emulate a full press/release cycle (2 * {EV_KEY + EV_SYN}) for wheel "ticks."

I will update the comment to say "...in which case a complementary release cycle
is emulated." If I have misunderstood your concern, please let me know.

> > +		input_sync(iqs62x_keys->input);
> > +	}
> > +
> > +	iqs62x_keys->interval = event_data->interval;
> > +
> > +	return NOTIFY_OK;
> > +}
> > +
> > +static int iqs62x_keys_probe(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> > +	struct iqs62x_keys_private *iqs62x_keys;
> > +	struct input_dev *input;
> > +	int error, i;
> > +
> > +	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
> > +				   GFP_KERNEL);
> > +	if (!iqs62x_keys)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, iqs62x_keys);
> > +
> > +	error = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
> > +	if (error)
> > +		return error;
> > +
> > +	input = devm_input_allocate_device(&pdev->dev);
> > +	if (!input)
> > +		return -ENOMEM;
> > +
> > +	input->keycodemax = iqs62x_keys->keycodemax;
> > +	input->keycode = iqs62x_keys->keycode;
> > +	input->keycodesize = sizeof(*iqs62x_keys->keycode);
> > +
> > +	input->name = iqs62x->dev_desc->dev_name;
> > +	input->id.bustype = BUS_I2C;
> > +
> > +	__set_bit(EV_KEY, input->evbit);
> > +
> > +	for (i = 0; i < iqs62x_keys->keycodemax; i++)
> > +		__set_bit(iqs62x_keys->keycode[i], input->keybit);
> > +
> > +	__clear_bit(KEY_RESERVED, input->keybit);
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> > +		if (iqs62x_keys->switches[i].enabled) {
> > +			__set_bit(EV_SW, input->evbit);
> > +			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
> > +		}
> > +
> > +	iqs62x_keys->iqs62x = iqs62x;
> > +	iqs62x_keys->input = input;
> > +
> > +	error = iqs62x_keys_init(iqs62x_keys);
> > +	if (error) {
> > +		dev_err(&pdev->dev, "Failed to initialize device: %d\n", error);
> > +		return error;
> > +	}
> > +
> > +	error = input_register_device(iqs62x_keys->input);
> > +	if (error) {
> > +		dev_err(&pdev->dev, "Failed to register device: %d\n", error);
> > +		return error;
> > +	}
> > +
> > +	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
> > +	error = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
> > +						 &iqs62x_keys->notifier);
> > +	if (error)
> > +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", error);
> > +
> > +	return error;
> > +}
> > +
> > +static int iqs62x_keys_remove(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
> > +	int error;
> > +
> > +	error = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
> > +						   &iqs62x_keys->notifier);
> > +	if (error)
> > +		dev_err(&pdev->dev,
> > +			"Failed to unregister notifier: %d\n", error);
> > +
> > +	return error;
> > +}
> > +
> > +static struct platform_driver iqs62x_keys_platform_driver = {
> > +	.driver = {
> > +		.name	= IQS62X_DRV_NAME_KEYS,
> > +	},
> > +	.probe		= iqs62x_keys_probe,
> > +	.remove		= iqs62x_keys_remove,
> > +};
> > +module_platform_driver(iqs62x_keys_platform_driver);
> > +
> > +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> > +MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Touch Keys");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);
> > -- 
> > 2.7.4
> > 
> 
> Thanks.
> 
> -- 
> Dmitry
> 

Kind regards,
Jeff LaBundy
Dmitry Torokhov Oct. 23, 2019, 11:08 p.m. UTC | #3
On Tue, Oct 22, 2019 at 08:29:13PM -0500, Jeff LaBundy wrote:
> Hi Dmitry,
> 
> Thank you for your prompt review.
> 
> On Tue, Oct 22, 2019 at 05:22:54PM -0700, Dmitry Torokhov wrote:
> > Hi Jeff,
> > 
> > On Sun, Oct 20, 2019 at 11:11:18PM -0500, Jeff LaBundy wrote:
> > > +	/*
> > > +	 * Each frame contains at most one wheel event (up or down), in which
> > > +	 * case a full keystroke is emulated.
> > > +	 */
> > > +	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
> > > +		input_report_key(iqs62x_keys->input,
> > > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
> > > +				 0);
> > > +		input_sync(iqs62x_keys->input);
> > > +	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
> > > +		input_report_key(iqs62x_keys->input,
> > > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
> > > +				 0);
> > 
> > Not '1'?
> > 
> 
> We pick up the '1' in the first of the two for loops above so long as the wheel
> moved "enough." In this case (and this case only), a subsequent '0' is sent to
> emulate a full press/release cycle (2 * {EV_KEY + EV_SYN}) for wheel "ticks."
> 
> I will update the comment to say "...in which case a complementary release cycle
> is emulated." If I have misunderstood your concern, please let me know.

Ah, sorry, no, I misread the code.

Thanks.

Patch
diff mbox series

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 8911bc2..ab10aff 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -657,6 +657,16 @@  config KEYBOARD_IPAQ_MICRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called ipaq-micro-keys.
 
+config KEYBOARD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 touch keys"
+	depends on MFD_IQS62X
+	help
+	  Say Y here to enable touch-key support for six-channel members of
+	  the Azoteq ProxFusion family of sensor devices.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 9510325..ee85b7f 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
+obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
new file mode 100644
index 0000000..9d929f1
--- /dev/null
+++ b/drivers/input/keyboard/iqs62x-keys.c
@@ -0,0 +1,340 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Touch Keys
+ *
+ * Copyright (C) 2019
+ * Author: Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+	IQS62X_SW_HALL_N,
+	IQS62X_SW_HALL_S,
+};
+
+static const char * const iqs62x_switch_names[] = {
+	[IQS62X_SW_HALL_N] = "hall_switch_north",
+	[IQS62X_SW_HALL_S] = "hall_switch_south",
+};
+
+struct iqs62x_switch_desc {
+	enum iqs62x_event_flag flag;
+	unsigned int code;
+	bool enabled;
+};
+
+struct iqs62x_keys_private {
+	struct iqs62x_core *iqs62x;
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
+	unsigned int keycode[IQS62X_NUM_KEYS];
+	unsigned int keycodemax;
+	u8 interval;
+};
+
+static int iqs62x_keys_parse_prop(struct platform_device *pdev,
+				  struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct device_node *keys_node = pdev->dev.of_node;
+	struct device_node *hall_node;
+	unsigned int val;
+	int ret, i;
+
+	if (!keys_node)
+		return 0;
+
+	ret = of_property_read_variable_u32_array(keys_node, "linux,keycodes",
+						  iqs62x_keys->keycode, 0,
+						  IQS62X_NUM_KEYS);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
+		return ret;
+	}
+	iqs62x_keys->keycodemax = ret;
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+		hall_node = of_get_child_by_name(keys_node,
+						 iqs62x_switch_names[i]);
+		if (!hall_node)
+			continue;
+
+		ret = of_property_read_u32(hall_node, "linux,code", &val);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
+				ret);
+			of_node_put(hall_node);
+			return ret;
+		}
+
+		if (of_property_read_bool(hall_node, "azoteq,use-prox"))
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_P :
+							 IQS62X_EVENT_HALL_S_P);
+		else
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_T :
+							 IQS62X_EVENT_HALL_S_T);
+
+		iqs62x_keys->switches[i].code = val;
+		iqs62x_keys->switches[i].enabled = true;
+
+		of_node_put(hall_node);
+	}
+
+	return 0;
+}
+
+static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
+	enum iqs62x_event_flag flag;
+	unsigned int event_mask_reg;
+	unsigned int event_mask = 0;
+	unsigned int val;
+	int error, i;
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS621_PROD_NUM:
+	case IQS622_PROD_NUM:
+		event_mask_reg = IQS620_GLBL_EVENT_MASK;
+
+		/*
+		 * Discreet button, hysteresis and SAR UI flags represent keys
+		 * and are unmasked if mapped to a valid keycode.
+		 */
+		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
+				continue;
+
+			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
+				event_mask |= iqs62x->dev_desc->prox_mask;
+			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
+				event_mask |= (iqs62x->dev_desc->hyst_mask |
+					       iqs62x->dev_desc->sar_mask);
+		}
+
+		error = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
+				    &val);
+		if (error)
+			return error;
+
+		/*
+		 * Hall UI flags represent switches and are unmasked if their
+		 * corresponding child nodes are present.
+		 */
+		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+			if (!(iqs62x_keys->switches[i].enabled))
+				continue;
+
+			flag = iqs62x_keys->switches[i].flag;
+
+			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
+				continue;
+
+			event_mask |= iqs62x->dev_desc->hall_mask;
+
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    (val & iqs62x_events[flag].mask) ==
+					    iqs62x_events[flag].val);
+		}
+
+		input_sync(iqs62x_keys->input);
+		break;
+
+	case IQS624_PROD_NUM:
+		event_mask_reg = IQS624_HALL_UI;
+
+		/*
+		 * Interval change events represent keys and are unmasked if
+		 * either wheel movement flag is mapped to a valid keycode.
+		 */
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		error = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
+				    &val);
+		if (error)
+			return error;
+
+		iqs62x_keys->interval = val;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
+}
+
+static int iqs62x_keys_notifier(struct notifier_block *notifier,
+				unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs62x_keys_private *iqs62x_keys;
+	int error, i;
+
+	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
+				   notifier);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		error = iqs62x_keys_init(iqs62x_keys);
+		if (error) {
+			dev_err(iqs62x_keys->input->dev.parent,
+				"Failed to re-initialize device: %d\n", error);
+			return NOTIFY_BAD;
+		}
+
+		return NOTIFY_OK;
+	}
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
+		    event_data->interval == iqs62x_keys->interval)
+			continue;
+
+		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
+				 event_flags & BIT(i));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    event_flags &
+					    BIT(iqs62x_keys->switches[i].flag));
+
+	input_sync(iqs62x_keys->input);
+
+	if (event_data->interval == iqs62x_keys->interval)
+		return NOTIFY_OK;
+
+	/*
+	 * Each frame contains at most one wheel event (up or down), in which
+	 * case a full keystroke is emulated.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
+				 0);
+		input_sync(iqs62x_keys->input);
+	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
+				 0);
+		input_sync(iqs62x_keys->input);
+	}
+
+	iqs62x_keys->interval = event_data->interval;
+
+	return NOTIFY_OK;
+}
+
+static int iqs62x_keys_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs62x_keys_private *iqs62x_keys;
+	struct input_dev *input;
+	int error, i;
+
+	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
+				   GFP_KERNEL);
+	if (!iqs62x_keys)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs62x_keys);
+
+	error = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
+	if (error)
+		return error;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->keycodemax = iqs62x_keys->keycodemax;
+	input->keycode = iqs62x_keys->keycode;
+	input->keycodesize = sizeof(*iqs62x_keys->keycode);
+
+	input->name = iqs62x->dev_desc->dev_name;
+	input->id.bustype = BUS_I2C;
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++)
+		__set_bit(iqs62x_keys->keycode[i], input->keybit);
+
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled) {
+			__set_bit(EV_SW, input->evbit);
+			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
+		}
+
+	iqs62x_keys->iqs62x = iqs62x;
+	iqs62x_keys->input = input;
+
+	error = iqs62x_keys_init(iqs62x_keys);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to initialize device: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(iqs62x_keys->input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to register device: %d\n", error);
+		return error;
+	}
+
+	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
+	error = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
+						 &iqs62x_keys->notifier);
+	if (error)
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", error);
+
+	return error;
+}
+
+static int iqs62x_keys_remove(struct platform_device *pdev)
+{
+	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
+	int error;
+
+	error = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
+						   &iqs62x_keys->notifier);
+	if (error)
+		dev_err(&pdev->dev,
+			"Failed to unregister notifier: %d\n", error);
+
+	return error;
+}
+
+static struct platform_driver iqs62x_keys_platform_driver = {
+	.driver = {
+		.name	= IQS62X_DRV_NAME_KEYS,
+	},
+	.probe		= iqs62x_keys_probe,
+	.remove		= iqs62x_keys_remove,
+};
+module_platform_driver(iqs62x_keys_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Touch Keys");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);