diff mbox series

[5/5] arm64: dts: meson-gx: fix i2c compatible

Message ID 20191021142904.12401-6-narmstrong@baylibre.com (mailing list archive)
State Mainlined
Commit 87297878b5b7c2fc4cecd66fc96b3061d04b6b3b
Headers show
Series arm64: dts: meson: new fixes following YAML bindings schemas conversion | expand

Commit Message

Neil Armstrong Oct. 21, 2019, 2:29 p.m. UTC 
This fixes the following DT schemas check errors:
meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible: Additional items are not allowed ('amlogic,meson-gxbb-i2c' was unexpected)
meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible:0: 'amlogic,meson-gx-i2c' is not one of ['amlogic,meson6-i2c', 'amlogic,meson-gxbb-i2c', 'amlogic,meson-axg-i2c']
meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible: ['amlogic,meson-gx-i2c', 'amlogic,meson-gxbb-i2c'] is too long

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 042132bf5b76..10d5c97cba4f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -240,7 +240,7 @@ 
 			};
 
 			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x08500 0x0 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -290,7 +290,7 @@ 
 			};
 
 			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087c0 0x0 0x20>;
 				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -299,7 +299,7 @@ 
 			};
 
 			i2c_C: i2c@87e0 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087e0 0x0 0x20>;
 				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -415,7 +415,7 @@ 
 			};
 
 			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x500 0x0 0x20>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;