overlay/066: copy-up test for variant sparse files
diff mbox series

Message ID 20191022122621.27374-1-cgxu519@mykernel.net
State New
Headers show
Series
  • overlay/066: copy-up test for variant sparse files
Related show

Commit Message

Chengguang Xu Oct. 22, 2019, 12:26 p.m. UTC
This is intensive copy-up test for sparse files,
these cases are mainly used for regression test
of copy-up improvement for sparse files.

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
---
 tests/overlay/066     | 108 ++++++++++++++++++++++++++++++++++++++++++
 tests/overlay/066.out |   2 +
 tests/overlay/group   |   1 +
 3 files changed, 111 insertions(+)
 create mode 100755 tests/overlay/066
 create mode 100644 tests/overlay/066.out

Comments

Amir Goldstein Oct. 22, 2019, 1:31 p.m. UTC | #1
On Tue, Oct 22, 2019 at 3:26 PM Chengguang Xu <cgxu519@mykernel.net> wrote:
>
> This is intensive copy-up test for sparse files,
> these cases are mainly used for regression test
> of copy-up improvement for sparse files.
>
> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
> ---
>  tests/overlay/066     | 108 ++++++++++++++++++++++++++++++++++++++++++
>  tests/overlay/066.out |   2 +
>  tests/overlay/group   |   1 +
>  3 files changed, 111 insertions(+)
>  create mode 100755 tests/overlay/066
>  create mode 100644 tests/overlay/066.out
>
> diff --git a/tests/overlay/066 b/tests/overlay/066
> new file mode 100755
> index 00000000..0394b14e
> --- /dev/null
> +++ b/tests/overlay/066
> @@ -0,0 +1,108 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2019 Chengguang Xu <cgxu519@mykernel.net>. All Rights Reserved.
> +#
> +# FS QA Test 066
> +#
> +# Test overlayfs copy-up function for variant sparse files.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1       # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +       cd /
> +       rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_supported_os Linux
> +_require_test
> +_require_scratch
> +
> +# Remove all files from previous tests
> +_scratch_mkfs
> +_require_fs_space $OVL_BASE_SCRATCH_MNT $((10*1024*13 + 100*1024))

Please add a comment about how the above is calculated.
Should it depend on fs reported iosize or blocksize?

> +
> +lowerdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER
> +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
> +testfile="copyup_sparse_test"
> +mkdir -p $lowerdir
> +
> +# Create a completely empty hole file.
> +$XFS_IO_PROG -fc "truncate 10M" "${lowerdir}/${testfile}_empty_holefile" >>$seqres.full
> +
> +iosize=`stat -c %o "${lowerdir}/${testfile}_empty_holefile"`

I am not sure why fs reported iosize is interesting for this test case.
If anything you need _get_file_block_size

> +if [ $iosize -le 1024 ]; then
> +       ioszie=1

typo: ioszie

> +else
> +       iosize=`expr $iosize / 1024`
> +fi
> +
> +# Create test files with different hole size patterns.
> +while [ $iosize -le 2048 ]; do
> +       pos=$iosize
> +       $XFS_IO_PROG -fc "truncate 10M" "${lowerdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
> +       while [ $pos -lt 8192 ]; do
> +               $XFS_IO_PROG -fc "pwrite ${pos}K ${iosize}K" "${lowerdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
> +               pos=`expr $pos + $iosize + $iosize`
> +       done
> +       iosize=`expr $iosize + $iosize`
> +done
> +
> +# Create test file with many random holes(1M~2M).
> +$XFS_IO_PROG -fc "truncate 100M" "${lowerdir}/${testfile}_random_holefile" >>$seqres.full
> +pos=2048
> +while [ $pos -le 81920 ]; do
> +       iosize=`expr $RANDOM % 2048`
> +       if [ $iosize -lt 1024 ]; then
> +               iosize=`expr $iosize + 1024`
> +       fi

IOW: iosize=`expr $RANDOM % 1024 + 1024`

> +       $XFS_IO_PROG -fc "pwrite ${pos}K ${iosize}K" "${lowerdir}/${testfile}_random_holefile" >>$seqres.full
> +       pos=`expr $pos + $iosize + $iosize`
> +done
> +
> +_scratch_mount
> +
> +# Open the files should succeed, no errors are expected.
> +for f in $SCRATCH_MNT/*; do
> +       $XFS_IO_PROG -c "open" $f >>$seqres.full
> +done
> +
> +echo "Silence is golden"
> +
> +# Check all copy-up files in upper layer.
> +iosize=`stat -c %o "${lowerdir}/${testfile}_empty_holefile"`
> +if [ $iosize -le 1024 ]; then
> +       ioszie=1

typo: ioszie

> +else
> +       iosize=`expr $iosize / 1024`
> +fi
> +
> +while [ $iosize -le 2048 ]; do
> +       diff "${lowerdir}/${testfile}_iosize${iosize}K_holefile" "${upperdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
> +       iosize=`expr $iosize + $iosize`
> +done
> +
> +diff "${lowerdir}/${testfile}_empty_holefile"  "${upperdir}/${testfile}_empty_holefile"  >>$seqres.full
> +diff "${lowerdir}/${testfile}_random_holefile" "${upperdir}/${testfile}_random_holefile" >>$seqres.full

This expression does not fail the test if file differ?
Did you mean:

diff "${lowerdir}/${testfile}_empty_holefile"
"${upperdir}/${testfile}_empty_holefile"  >>$seqres.full || \
    echo ${testfile}_empty_holefile" copy up failed

> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/overlay/066.out b/tests/overlay/066.out
> new file mode 100644
> index 00000000..b60cc24c
> --- /dev/null
> +++ b/tests/overlay/066.out
> @@ -0,0 +1,2 @@
> +QA output created by 066
> +Silence is golden
> diff --git a/tests/overlay/group b/tests/overlay/group
> index ef8517a1..1dec7db9 100644
> --- a/tests/overlay/group
> +++ b/tests/overlay/group
> @@ -68,3 +68,4 @@
>  063 auto quick whiteout
>  064 auto quick copyup
>  065 auto quick mount
> +066 auto quick copyup

I'm curious, how long does the test run with and without copy up hole
optimization patch?

Thanks,
Amir.
Chengguang Xu Oct. 23, 2019, 2:35 a.m. UTC | #2
---- 在 星期二, 2019-10-22 21:31:32 Amir Goldstein <amir73il@gmail.com> 撰写 ----
 > On Tue, Oct 22, 2019 at 3:26 PM Chengguang Xu <cgxu519@mykernel.net> wrote:
 > >
 > > This is intensive copy-up test for sparse files,
 > > these cases are mainly used for regression test
 > > of copy-up improvement for sparse files.
 > >
 > > Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
 > > ---
 > >  tests/overlay/066     | 108 ++++++++++++++++++++++++++++++++++++++++++
 > >  tests/overlay/066.out |   2 +
 > >  tests/overlay/group   |   1 +
 > >  3 files changed, 111 insertions(+)
 > >  create mode 100755 tests/overlay/066
 > >  create mode 100644 tests/overlay/066.out
 > >
 > > diff --git a/tests/overlay/066 b/tests/overlay/066
 > > new file mode 100755
 > > index 00000000..0394b14e
 > > --- /dev/null
 > > +++ b/tests/overlay/066
 > > @@ -0,0 +1,108 @@
 > > +#! /bin/bash
 > > +# SPDX-License-Identifier: GPL-2.0
 > > +# Copyright (c) 2019 Chengguang Xu <cgxu519@mykernel.net>. All Rights Reserved.
 > > +#
 > > +# FS QA Test 066
 > > +#
 > > +# Test overlayfs copy-up function for variant sparse files.
 > > +#
 > > +seq=`basename $0`
 > > +seqres=$RESULT_DIR/$seq
 > > +echo "QA output created by $seq"
 > > +
 > > +here=`pwd`
 > > +tmp=/tmp/$
 > > +status=1       # failure is the default!
 > > +trap "_cleanup; exit \$status" 0 1 2 3 15
 > > +
 > > +_cleanup()
 > > +{
 > > +       cd /
 > > +       rm -f $tmp.*
 > > +}
 > > +
 > > +# get standard environment, filters and checks
 > > +. ./common/rc
 > > +. ./common/filter
 > > +
 > > +# remove previous $seqres.full before test
 > > +rm -f $seqres.full
 > > +
 > > +# real QA test starts here
 > > +
 > > +# Modify as appropriate.
 > > +_supported_fs generic
 > > +_supported_os Linux
 > > +_require_test
 > > +_require_scratch
 > > +
 > > +# Remove all files from previous tests
 > > +_scratch_mkfs
 > > +_require_fs_space $OVL_BASE_SCRATCH_MNT $((10*1024*13 + 100*1024))
 > 
 > Please add a comment about how the above is calculated.
 > Should it depend on fs reported iosize or blocksize?

The calculation based on file size * file num, in other word,
we have 13 10M files and one 100M file. I'll add explanation
for it.

 > 
 > > +
 > > +lowerdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER
 > > +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
 > > +testfile="copyup_sparse_test"
 > > +mkdir -p $lowerdir
 > > +
 > > +# Create a completely empty hole file.
 > > +$XFS_IO_PROG -fc "truncate 10M" "${lowerdir}/${testfile}_empty_holefile" >>$seqres.full
 > > +
 > > +iosize=`stat -c %o "${lowerdir}/${testfile}_empty_holefile"`
 > 
 > I am not sure why fs reported iosize is interesting for this test case.
 > If anything you need _get_file_block_size

If hole size is smaller than fs block size, then the block will still be allocated,
let me check _get_file_block_size.


 > 
 > > +if [ $iosize -le 1024 ]; then
 > > +       ioszie=1
 > 
 > typo: ioszie

I'll fix in v2.

 > 
 > > +else
 > > +       iosize=`expr $iosize / 1024`
 > > +fi
 > > +
 > > +# Create test files with different hole size patterns.
 > > +while [ $iosize -le 2048 ]; do
 > > +       pos=$iosize
 > > +       $XFS_IO_PROG -fc "truncate 10M" "${lowerdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
 > > +       while [ $pos -lt 8192 ]; do
 > > +               $XFS_IO_PROG -fc "pwrite ${pos}K ${iosize}K" "${lowerdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
 > > +               pos=`expr $pos + $iosize + $iosize`
 > > +       done
 > > +       iosize=`expr $iosize + $iosize`
 > > +done
 > > +
 > > +# Create test file with many random holes(1M~2M).
 > > +$XFS_IO_PROG -fc "truncate 100M" "${lowerdir}/${testfile}_random_holefile" >>$seqres.full
 > > +pos=2048
 > > +while [ $pos -le 81920 ]; do
 > > +       iosize=`expr $RANDOM % 2048`
 > > +       if [ $iosize -lt 1024 ]; then
 > > +               iosize=`expr $iosize + 1024`
 > > +       fi
 > 
 > IOW: iosize=`expr $RANDOM % 1024 + 1024`

Yeah, good suggestion but maybe 1M~2M hole size is not sufficient,
I plan to extend to 5M(max) in next version.

 > 
 > > +       $XFS_IO_PROG -fc "pwrite ${pos}K ${iosize}K" "${lowerdir}/${testfile}_random_holefile" >>$seqres.full
 > > +       pos=`expr $pos + $iosize + $iosize`
 > > +done
 > > +
 > > +_scratch_mount
 > > +
 > > +# Open the files should succeed, no errors are expected.
 > > +for f in $SCRATCH_MNT/*; do
 > > +       $XFS_IO_PROG -c "open" $f >>$seqres.full
 > > +done
 > > +
 > > +echo "Silence is golden"
 > > +
 > > +# Check all copy-up files in upper layer.
 > > +iosize=`stat -c %o "${lowerdir}/${testfile}_empty_holefile"`
 > > +if [ $iosize -le 1024 ]; then
 > > +       ioszie=1
 > 
 > typo: ioszie

I'll fix in v2.

 > 
 > > +else
 > > +       iosize=`expr $iosize / 1024`
 > > +fi
 > > +
 > > +while [ $iosize -le 2048 ]; do
 > > +       diff "${lowerdir}/${testfile}_iosize${iosize}K_holefile" "${upperdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
 > > +       iosize=`expr $iosize + $iosize`
 > > +done
 > > +
 > > +diff "${lowerdir}/${testfile}_empty_holefile"  "${upperdir}/${testfile}_empty_holefile"  >>$seqres.full
 > > +diff "${lowerdir}/${testfile}_random_holefile" "${upperdir}/${testfile}_random_holefile" >>$seqres.full
 > 
 > This expression does not fail the test if file differ?
 > Did you mean:
 > 
 > diff "${lowerdir}/${testfile}_empty_holefile"
 > "${upperdir}/${testfile}_empty_holefile"  >>$seqres.full || \
 >     echo ${testfile}_empty_holefile" copy up failed

Yeah, it's more useful for investigating problem.


 > 
 > > +
 > > +# success, all done
 > > +status=0
 > > +exit
 > > diff --git a/tests/overlay/066.out b/tests/overlay/066.out
 > > new file mode 100644
 > > index 00000000..b60cc24c
 > > --- /dev/null
 > > +++ b/tests/overlay/066.out
 > > @@ -0,0 +1,2 @@
 > > +QA output created by 066
 > > +Silence is golden
 > > diff --git a/tests/overlay/group b/tests/overlay/group
 > > index ef8517a1..1dec7db9 100644
 > > --- a/tests/overlay/group
 > > +++ b/tests/overlay/group
 > > @@ -68,3 +68,4 @@
 > >  063 auto quick whiteout
 > >  064 auto quick copyup
 > >  065 auto quick mount
 > > +066 auto quick copyup
 > 
 > I'm curious, how long does the test run with and without copy up hole
 > optimization patch?

I'm using NVMe SSD disk so the performance(bw & iops) is quite good,
below figure from the result of xfstest  for test case overlay/066.

xfs: 7s(before) => 6s(after)
ext4: 7s(before) => 6s(after)

Maybe there will be remarkable difference on bigger sparse file, 
if anyone interested on this I can add more test files(big) but it will also
increase  test time significantly.

Thanks,
Chengguang

Patch
diff mbox series

diff --git a/tests/overlay/066 b/tests/overlay/066
new file mode 100755
index 00000000..0394b14e
--- /dev/null
+++ b/tests/overlay/066
@@ -0,0 +1,108 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Chengguang Xu <cgxu519@mykernel.net>. All Rights Reserved.
+#
+# FS QA Test 066
+#
+# Test overlayfs copy-up function for variant sparse files.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_supported_os Linux
+_require_test
+_require_scratch
+
+# Remove all files from previous tests
+_scratch_mkfs
+_require_fs_space $OVL_BASE_SCRATCH_MNT $((10*1024*13 + 100*1024))
+
+lowerdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER
+upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
+testfile="copyup_sparse_test"
+mkdir -p $lowerdir
+
+# Create a completely empty hole file.
+$XFS_IO_PROG -fc "truncate 10M" "${lowerdir}/${testfile}_empty_holefile" >>$seqres.full
+
+iosize=`stat -c %o "${lowerdir}/${testfile}_empty_holefile"`
+if [ $iosize -le 1024 ]; then
+	ioszie=1
+else
+	iosize=`expr $iosize / 1024`
+fi
+
+# Create test files with different hole size patterns.
+while [ $iosize -le 2048 ]; do
+	pos=$iosize
+	$XFS_IO_PROG -fc "truncate 10M" "${lowerdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
+	while [ $pos -lt 8192 ]; do
+		$XFS_IO_PROG -fc "pwrite ${pos}K ${iosize}K" "${lowerdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
+		pos=`expr $pos + $iosize + $iosize`
+	done
+	iosize=`expr $iosize + $iosize`
+done
+
+# Create test file with many random holes(1M~2M).
+$XFS_IO_PROG -fc "truncate 100M" "${lowerdir}/${testfile}_random_holefile" >>$seqres.full
+pos=2048
+while [ $pos -le 81920 ]; do
+	iosize=`expr $RANDOM % 2048`
+	if [ $iosize -lt 1024 ]; then
+		iosize=`expr $iosize + 1024`
+	fi
+	$XFS_IO_PROG -fc "pwrite ${pos}K ${iosize}K" "${lowerdir}/${testfile}_random_holefile" >>$seqres.full
+	pos=`expr $pos + $iosize + $iosize`
+done
+
+_scratch_mount
+
+# Open the files should succeed, no errors are expected.
+for f in $SCRATCH_MNT/*; do
+	$XFS_IO_PROG -c "open" $f >>$seqres.full
+done
+
+echo "Silence is golden"
+
+# Check all copy-up files in upper layer.
+iosize=`stat -c %o "${lowerdir}/${testfile}_empty_holefile"`
+if [ $iosize -le 1024 ]; then
+	ioszie=1
+else
+	iosize=`expr $iosize / 1024`
+fi
+
+while [ $iosize -le 2048 ]; do
+	diff "${lowerdir}/${testfile}_iosize${iosize}K_holefile" "${upperdir}/${testfile}_iosize${iosize}K_holefile" >>$seqres.full
+	iosize=`expr $iosize + $iosize`
+done
+
+diff "${lowerdir}/${testfile}_empty_holefile"  "${upperdir}/${testfile}_empty_holefile"  >>$seqres.full
+diff "${lowerdir}/${testfile}_random_holefile" "${upperdir}/${testfile}_random_holefile" >>$seqres.full
+
+# success, all done
+status=0
+exit
diff --git a/tests/overlay/066.out b/tests/overlay/066.out
new file mode 100644
index 00000000..b60cc24c
--- /dev/null
+++ b/tests/overlay/066.out
@@ -0,0 +1,2 @@ 
+QA output created by 066
+Silence is golden
diff --git a/tests/overlay/group b/tests/overlay/group
index ef8517a1..1dec7db9 100644
--- a/tests/overlay/group
+++ b/tests/overlay/group
@@ -68,3 +68,4 @@ 
 063 auto quick whiteout
 064 auto quick copyup
 065 auto quick mount
+066 auto quick copyup