drm/simple-kms: Standardize arguments for callbacks
diff mbox series

Message ID 20191022155536.27939-1-daniel.vetter@ffwll.ch
State New
Headers show
Series
  • drm/simple-kms: Standardize arguments for callbacks
Related show

Commit Message

Daniel Vetter Oct. 22, 2019, 3:55 p.m. UTC
Passing the wrong type feels icky, everywhere else we use the pipe as
the first parameter. Spotted while discussing patches with Thomas
Zimmermann.

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
 drivers/gpu/drm/cirrus/cirrus.c         | 2 +-
 drivers/gpu/drm/drm_simple_kms_helper.c | 2 +-
 drivers/gpu/drm/pl111/pl111_display.c   | 4 ++--
 include/drm/drm_simple_kms_helper.h     | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

Comments

Thomas Zimmermann Oct. 22, 2019, 5:16 p.m. UTC | #1
Hi,

there are two types of callbacks in struct
drm_simple_display_pipe_funcs: functions that are genuine to simple KMS,
and functions that are merely forwarded from another structure (crtc,
plane, etc).

In the former category are enable(), disable(), check(), and update().
Those should probably receive a simple display pipe as their first argument.

In the latter category are mode_valid(), prepare_fb(), cleanup_fb(),
enable_vblank(), and disable_vblank(). IMHO those functions should
receive a pointer to the original structure as their first argument.
This type provides the context in which the operations make sense. (Even
their documentation already refers to the original structure.)

I admit that not all are as shareable as prepare_fb() and enable_fb().
But what else than boiler-plate wrappers do we get from simple display
pipe here?

Best regards
Thomas

Am 22.10.19 um 17:55 schrieb Daniel Vetter:
> Passing the wrong type feels icky, everywhere else we use the pipe as
> the first parameter. Spotted while discussing patches with Thomas
> Zimmermann.
> 
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Noralf Trønnes <noralf@tronnes.org>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Emil Velikov <emil.velikov@collabora.com>
> Cc: virtualization@lists.linux-foundation.org
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> ---
>  drivers/gpu/drm/cirrus/cirrus.c         | 2 +-
>  drivers/gpu/drm/drm_simple_kms_helper.c | 2 +-
>  drivers/gpu/drm/pl111/pl111_display.c   | 4 ++--
>  include/drm/drm_simple_kms_helper.h     | 2 +-
>  4 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/cirrus/cirrus.c b/drivers/gpu/drm/cirrus/cirrus.c
> index 7d08d067e1a4..248c9f765c45 100644
> --- a/drivers/gpu/drm/cirrus/cirrus.c
> +++ b/drivers/gpu/drm/cirrus/cirrus.c
> @@ -390,7 +390,7 @@ static int cirrus_conn_init(struct cirrus_device *cirrus)
>  /* ------------------------------------------------------------------ */
>  /* cirrus (simple) display pipe					      */
>  
> -static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_crtc *crtc,
> +static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
>  						   const struct drm_display_mode *mode)
>  {
>  	if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
> diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
> index 046055719245..15fb516ae2d8 100644
> --- a/drivers/gpu/drm/drm_simple_kms_helper.c
> +++ b/drivers/gpu/drm/drm_simple_kms_helper.c
> @@ -43,7 +43,7 @@ drm_simple_kms_crtc_mode_valid(struct drm_crtc *crtc,
>  		/* Anything goes */
>  		return MODE_OK;
>  
> -	return pipe->funcs->mode_valid(crtc, mode);
> +	return pipe->funcs->mode_valid(pipe, mode);
>  }
>  
>  static int drm_simple_kms_crtc_check(struct drm_crtc *crtc,
> diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
> index 024771a4083e..703ddc803c55 100644
> --- a/drivers/gpu/drm/pl111/pl111_display.c
> +++ b/drivers/gpu/drm/pl111/pl111_display.c
> @@ -48,10 +48,10 @@ irqreturn_t pl111_irq(int irq, void *data)
>  }
>  
>  static enum drm_mode_status
> -pl111_mode_valid(struct drm_crtc *crtc,
> +pl111_mode_valid(struct drm_simple_display_pipe *pipe,
>  		 const struct drm_display_mode *mode)
>  {
> -	struct drm_device *drm = crtc->dev;
> +	struct drm_device *drm = pipe->crtc.dev;
>  	struct pl111_drm_dev_private *priv = drm->dev_private;
>  	u32 cpp = priv->variant->fb_bpp / 8;
>  	u64 bw;
> diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
> index 4d89cd0a60db..15afee9cf049 100644
> --- a/include/drm/drm_simple_kms_helper.h
> +++ b/include/drm/drm_simple_kms_helper.h
> @@ -49,7 +49,7 @@ struct drm_simple_display_pipe_funcs {
>  	 *
>  	 * drm_mode_status Enum
>  	 */
> -	enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
> +	enum drm_mode_status (*mode_valid)(struct drm_simple_display_pipe *pipe,
>  					   const struct drm_display_mode *mode);
>  
>  	/**
>
Daniel Vetter Oct. 22, 2019, 7:03 p.m. UTC | #2
On Tue, Oct 22, 2019 at 7:16 PM Thomas Zimmermann <tzimmermann@suse.de> wrote:
>
> Hi,
>
> there are two types of callbacks in struct
> drm_simple_display_pipe_funcs: functions that are genuine to simple KMS,
> and functions that are merely forwarded from another structure (crtc,
> plane, etc).
>
> In the former category are enable(), disable(), check(), and update().
> Those should probably receive a simple display pipe as their first argument.

mode_valid _very_ much belongs to this category too, since there's
mode_valid hooks also on other objects. But simple pipe helper
condenses that down to one mode_valid hook (we could also put the
mode_valid onto encoder, wouldn't change anything).

> In the latter category are mode_valid(), prepare_fb(), cleanup_fb(),
> enable_vblank(), and disable_vblank(). IMHO those functions should
> receive a pointer to the original structure as their first argument.
> This type provides the context in which the operations make sense. (Even
> their documentation already refers to the original structure.)

Now on those you can maybe make a case that they only exist in one
object. But the entire point of simple helpers was to condense the zoo
of drm types down to one. Only reason you don't also get a
drm_simple_display_pipe_state is that this one would be a bit more
work to make work correctly. If we full on leak all the underlying
objects, then you might as well set them up yourself and set up all
the hooks, it's just a few more lines of code.

Imo for simple pipe we should go more into that direction, not less.

> I admit that not all are as shareable as prepare_fb() and enable_fb().
> But what else than boiler-plate wrappers do we get from simple display
> pipe here?

Boiler plate wrappers is pretty much the entire point of simple pipe
helpers. Anytime you're interested in the things it abstracts away
(crtc, plane, encoder) you probably want your own atomic
implementation. That's why I don't think using simple pipe for fbdev
conversion is a good fit, it's not meant to be useful for all small
drivers. Only for the _really_ simple ones.

Otherwise if we readd all the bells and whistles to simple pipe
helpers, then we just end back where we started. That's also why I
personally think explicit simple wrappers would fit better, instead of
wrestling the prepare/cleanup_fb functions to match full atomic
helpers.
-Daniel

>
> Best regards
> Thomas
>
> Am 22.10.19 um 17:55 schrieb Daniel Vetter:
> > Passing the wrong type feels icky, everywhere else we use the pipe as
> > the first parameter. Spotted while discussing patches with Thomas
> > Zimmermann.
> >
> > Cc: Thomas Zimmermann <tzimmermann@suse.de>
> > Cc: Noralf Trønnes <noralf@tronnes.org>
> > Cc: Gerd Hoffmann <kraxel@redhat.com>
> > Cc: Eric Anholt <eric@anholt.net>
> > Cc: Emil Velikov <emil.velikov@collabora.com>
> > Cc: virtualization@lists.linux-foundation.org
> > Cc: Linus Walleij <linus.walleij@linaro.org>
> > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> > ---
> >  drivers/gpu/drm/cirrus/cirrus.c         | 2 +-
> >  drivers/gpu/drm/drm_simple_kms_helper.c | 2 +-
> >  drivers/gpu/drm/pl111/pl111_display.c   | 4 ++--
> >  include/drm/drm_simple_kms_helper.h     | 2 +-
> >  4 files changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/cirrus/cirrus.c b/drivers/gpu/drm/cirrus/cirrus.c
> > index 7d08d067e1a4..248c9f765c45 100644
> > --- a/drivers/gpu/drm/cirrus/cirrus.c
> > +++ b/drivers/gpu/drm/cirrus/cirrus.c
> > @@ -390,7 +390,7 @@ static int cirrus_conn_init(struct cirrus_device *cirrus)
> >  /* ------------------------------------------------------------------ */
> >  /* cirrus (simple) display pipe                                            */
> >
> > -static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_crtc *crtc,
> > +static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
> >                                                  const struct drm_display_mode *mode)
> >  {
> >       if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
> > diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
> > index 046055719245..15fb516ae2d8 100644
> > --- a/drivers/gpu/drm/drm_simple_kms_helper.c
> > +++ b/drivers/gpu/drm/drm_simple_kms_helper.c
> > @@ -43,7 +43,7 @@ drm_simple_kms_crtc_mode_valid(struct drm_crtc *crtc,
> >               /* Anything goes */
> >               return MODE_OK;
> >
> > -     return pipe->funcs->mode_valid(crtc, mode);
> > +     return pipe->funcs->mode_valid(pipe, mode);
> >  }
> >
> >  static int drm_simple_kms_crtc_check(struct drm_crtc *crtc,
> > diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
> > index 024771a4083e..703ddc803c55 100644
> > --- a/drivers/gpu/drm/pl111/pl111_display.c
> > +++ b/drivers/gpu/drm/pl111/pl111_display.c
> > @@ -48,10 +48,10 @@ irqreturn_t pl111_irq(int irq, void *data)
> >  }
> >
> >  static enum drm_mode_status
> > -pl111_mode_valid(struct drm_crtc *crtc,
> > +pl111_mode_valid(struct drm_simple_display_pipe *pipe,
> >                const struct drm_display_mode *mode)
> >  {
> > -     struct drm_device *drm = crtc->dev;
> > +     struct drm_device *drm = pipe->crtc.dev;
> >       struct pl111_drm_dev_private *priv = drm->dev_private;
> >       u32 cpp = priv->variant->fb_bpp / 8;
> >       u64 bw;
> > diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
> > index 4d89cd0a60db..15afee9cf049 100644
> > --- a/include/drm/drm_simple_kms_helper.h
> > +++ b/include/drm/drm_simple_kms_helper.h
> > @@ -49,7 +49,7 @@ struct drm_simple_display_pipe_funcs {
> >        *
> >        * drm_mode_status Enum
> >        */
> > -     enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
> > +     enum drm_mode_status (*mode_valid)(struct drm_simple_display_pipe *pipe,
> >                                          const struct drm_display_mode *mode);
> >
> >       /**
> >
>
> --
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer
>
Thomas Zimmermann Oct. 23, 2019, 6:47 a.m. UTC | #3
Hi

Am 22.10.19 um 21:03 schrieb Daniel Vetter:
> On Tue, Oct 22, 2019 at 7:16 PM Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>
>> Hi,
>>
>> there are two types of callbacks in struct
>> drm_simple_display_pipe_funcs: functions that are genuine to simple KMS,
>> and functions that are merely forwarded from another structure (crtc,
>> plane, etc).
>>
>> In the former category are enable(), disable(), check(), and update().
>> Those should probably receive a simple display pipe as their first argument.
> 
> mode_valid _very_ much belongs to this category too, since there's
> mode_valid hooks also on other objects. But simple pipe helper
> condenses that down to one mode_valid hook (we could also put the
> mode_valid onto encoder, wouldn't change anything).
> 
>> In the latter category are mode_valid(), prepare_fb(), cleanup_fb(),
>> enable_vblank(), and disable_vblank(). IMHO those functions should
>> receive a pointer to the original structure as their first argument.
>> This type provides the context in which the operations make sense. (Even
>> their documentation already refers to the original structure.)
> 
> Now on those you can maybe make a case that they only exist in one
> object. But the entire point of simple helpers was to condense the zoo
> of drm types down to one. Only reason you don't also get a
> drm_simple_display_pipe_state is that this one would be a bit more
> work to make work correctly. If we full on leak all the underlying
> objects, then you might as well set them up yourself and set up all
> the hooks, it's just a few more lines of code.
> 
> Imo for simple pipe we should go more into that direction, not less.
> 
>> I admit that not all are as shareable as prepare_fb() and enable_fb().
>> But what else than boiler-plate wrappers do we get from simple display
>> pipe here?
> 
> Boiler plate wrappers is pretty much the entire point of simple pipe
> helpers. Anytime you're interested in the things it abstracts away
> (crtc, plane, encoder) you probably want your own atomic
> implementation.

I was speaking of boiler-plate code in drivers and other helpers (e.g.,
drm_gem_fb_simple_display_pipe_prepare_fb() )

TBH I don't think it is possible to build and use simple pipe without
exposing the underlying primitives (crtc, plane, connector). This would
require a completely separate set of atomic helpers. IMHO the current
simple pipe is a mid-layer and comes with typical mid-layer problems.

Anyway, given your rational for the current design, I'll update my
recent patches for prepare_fb() to support simple pipe.

For this patch

  Acked-By: Thomas Zimmermann <tzimmermann@suse.de>

Best regards
Thomas

> conversion is a good fit, it's not meant to be useful for all small
> drivers. Only for the _really_ simple ones.
> 
> Otherwise if we readd all the bells and whistles to simple pipe
> helpers, then we just end back where we started. That's also why I
> personally think explicit simple wrappers would fit better, instead of
> wrestling the prepare/cleanup_fb functions to match full atomic
> helpers.
> -Daniel
> 
>>
>> Best regards
>> Thomas
>>
>> Am 22.10.19 um 17:55 schrieb Daniel Vetter:
>>> Passing the wrong type feels icky, everywhere else we use the pipe as
>>> the first parameter. Spotted while discussing patches with Thomas
>>> Zimmermann.
>>>
>>> Cc: Thomas Zimmermann <tzimmermann@suse.de>
>>> Cc: Noralf Trønnes <noralf@tronnes.org>
>>> Cc: Gerd Hoffmann <kraxel@redhat.com>
>>> Cc: Eric Anholt <eric@anholt.net>
>>> Cc: Emil Velikov <emil.velikov@collabora.com>
>>> Cc: virtualization@lists.linux-foundation.org
>>> Cc: Linus Walleij <linus.walleij@linaro.org>
>>> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
>>> ---
>>>  drivers/gpu/drm/cirrus/cirrus.c         | 2 +-
>>>  drivers/gpu/drm/drm_simple_kms_helper.c | 2 +-
>>>  drivers/gpu/drm/pl111/pl111_display.c   | 4 ++--
>>>  include/drm/drm_simple_kms_helper.h     | 2 +-
>>>  4 files changed, 5 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/cirrus/cirrus.c b/drivers/gpu/drm/cirrus/cirrus.c
>>> index 7d08d067e1a4..248c9f765c45 100644
>>> --- a/drivers/gpu/drm/cirrus/cirrus.c
>>> +++ b/drivers/gpu/drm/cirrus/cirrus.c
>>> @@ -390,7 +390,7 @@ static int cirrus_conn_init(struct cirrus_device *cirrus)
>>>  /* ------------------------------------------------------------------ */
>>>  /* cirrus (simple) display pipe                                            */
>>>
>>> -static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_crtc *crtc,
>>> +static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
>>>                                                  const struct drm_display_mode *mode)
>>>  {
>>>       if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
>>> diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
>>> index 046055719245..15fb516ae2d8 100644
>>> --- a/drivers/gpu/drm/drm_simple_kms_helper.c
>>> +++ b/drivers/gpu/drm/drm_simple_kms_helper.c
>>> @@ -43,7 +43,7 @@ drm_simple_kms_crtc_mode_valid(struct drm_crtc *crtc,
>>>               /* Anything goes */
>>>               return MODE_OK;
>>>
>>> -     return pipe->funcs->mode_valid(crtc, mode);
>>> +     return pipe->funcs->mode_valid(pipe, mode);
>>>  }
>>>
>>>  static int drm_simple_kms_crtc_check(struct drm_crtc *crtc,
>>> diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
>>> index 024771a4083e..703ddc803c55 100644
>>> --- a/drivers/gpu/drm/pl111/pl111_display.c
>>> +++ b/drivers/gpu/drm/pl111/pl111_display.c
>>> @@ -48,10 +48,10 @@ irqreturn_t pl111_irq(int irq, void *data)
>>>  }
>>>
>>>  static enum drm_mode_status
>>> -pl111_mode_valid(struct drm_crtc *crtc,
>>> +pl111_mode_valid(struct drm_simple_display_pipe *pipe,
>>>                const struct drm_display_mode *mode)
>>>  {
>>> -     struct drm_device *drm = crtc->dev;
>>> +     struct drm_device *drm = pipe->crtc.dev;
>>>       struct pl111_drm_dev_private *priv = drm->dev_private;
>>>       u32 cpp = priv->variant->fb_bpp / 8;
>>>       u64 bw;
>>> diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
>>> index 4d89cd0a60db..15afee9cf049 100644
>>> --- a/include/drm/drm_simple_kms_helper.h
>>> +++ b/include/drm/drm_simple_kms_helper.h
>>> @@ -49,7 +49,7 @@ struct drm_simple_display_pipe_funcs {
>>>        *
>>>        * drm_mode_status Enum
>>>        */
>>> -     enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
>>> +     enum drm_mode_status (*mode_valid)(struct drm_simple_display_pipe *pipe,
>>>                                          const struct drm_display_mode *mode);
>>>
>>>       /**
>>>
>>
>> --
>> Thomas Zimmermann
>> Graphics Driver Developer
>> SUSE Software Solutions Germany GmbH
>> Maxfeldstr. 5, 90409 Nürnberg, Germany
>> (HRB 36809, AG Nürnberg)
>> Geschäftsführer: Felix Imendörffer
>>
> 
>
Daniel Vetter Oct. 23, 2019, 8:53 a.m. UTC | #4
On Wed, Oct 23, 2019 at 08:47:57AM +0200, Thomas Zimmermann wrote:
> Hi
> 
> Am 22.10.19 um 21:03 schrieb Daniel Vetter:
> > On Tue, Oct 22, 2019 at 7:16 PM Thomas Zimmermann <tzimmermann@suse.de> wrote:
> >>
> >> Hi,
> >>
> >> there are two types of callbacks in struct
> >> drm_simple_display_pipe_funcs: functions that are genuine to simple KMS,
> >> and functions that are merely forwarded from another structure (crtc,
> >> plane, etc).
> >>
> >> In the former category are enable(), disable(), check(), and update().
> >> Those should probably receive a simple display pipe as their first argument.
> > 
> > mode_valid _very_ much belongs to this category too, since there's
> > mode_valid hooks also on other objects. But simple pipe helper
> > condenses that down to one mode_valid hook (we could also put the
> > mode_valid onto encoder, wouldn't change anything).
> > 
> >> In the latter category are mode_valid(), prepare_fb(), cleanup_fb(),
> >> enable_vblank(), and disable_vblank(). IMHO those functions should
> >> receive a pointer to the original structure as their first argument.
> >> This type provides the context in which the operations make sense. (Even
> >> their documentation already refers to the original structure.)
> > 
> > Now on those you can maybe make a case that they only exist in one
> > object. But the entire point of simple helpers was to condense the zoo
> > of drm types down to one. Only reason you don't also get a
> > drm_simple_display_pipe_state is that this one would be a bit more
> > work to make work correctly. If we full on leak all the underlying
> > objects, then you might as well set them up yourself and set up all
> > the hooks, it's just a few more lines of code.
> > 
> > Imo for simple pipe we should go more into that direction, not less.
> > 
> >> I admit that not all are as shareable as prepare_fb() and enable_fb().
> >> But what else than boiler-plate wrappers do we get from simple display
> >> pipe here?
> > 
> > Boiler plate wrappers is pretty much the entire point of simple pipe
> > helpers. Anytime you're interested in the things it abstracts away
> > (crtc, plane, encoder) you probably want your own atomic
> > implementation.
> 
> I was speaking of boiler-plate code in drivers and other helpers (e.g.,
> drm_gem_fb_simple_display_pipe_prepare_fb() )
> 
> TBH I don't think it is possible to build and use simple pipe without
> exposing the underlying primitives (crtc, plane, connector). This would
> require a completely separate set of atomic helpers. IMHO the current
> simple pipe is a mid-layer and comes with typical mid-layer problems.

Helpers can be midlayers, as long as their optional. And for simple I
agree it's not a perfect illusion, it's a tradeoff between having a huge
helper library that remaps everything and still enabling useful code and
complexity savings in the tiny drivers.

Maybe another rule of thumb: If your driver has more than one source file,
simple pipe is maybe not what you're looking for. Exceptions apply ofc.
simple pipe was designed for drm/tiny, and it utterly excels at that. But
that doesn't make it a general purpose tool.

> Anyway, given your rational for the current design, I'll update my
> recent patches for prepare_fb() to support simple pipe.
> 
> For this patch
> 
>   Acked-By: Thomas Zimmermann <tzimmermann@suse.de>

Thanks, will apply.
-Daniel

> 
> Best regards
> Thomas
> 
> > conversion is a good fit, it's not meant to be useful for all small
> > drivers. Only for the _really_ simple ones.
> > 
> > Otherwise if we readd all the bells and whistles to simple pipe
> > helpers, then we just end back where we started. That's also why I
> > personally think explicit simple wrappers would fit better, instead of
> > wrestling the prepare/cleanup_fb functions to match full atomic
> > helpers.
> > -Daniel
> > 
> >>
> >> Best regards
> >> Thomas
> >>
> >> Am 22.10.19 um 17:55 schrieb Daniel Vetter:
> >>> Passing the wrong type feels icky, everywhere else we use the pipe as
> >>> the first parameter. Spotted while discussing patches with Thomas
> >>> Zimmermann.
> >>>
> >>> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> >>> Cc: Noralf Trønnes <noralf@tronnes.org>
> >>> Cc: Gerd Hoffmann <kraxel@redhat.com>
> >>> Cc: Eric Anholt <eric@anholt.net>
> >>> Cc: Emil Velikov <emil.velikov@collabora.com>
> >>> Cc: virtualization@lists.linux-foundation.org
> >>> Cc: Linus Walleij <linus.walleij@linaro.org>
> >>> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> >>> ---
> >>>  drivers/gpu/drm/cirrus/cirrus.c         | 2 +-
> >>>  drivers/gpu/drm/drm_simple_kms_helper.c | 2 +-
> >>>  drivers/gpu/drm/pl111/pl111_display.c   | 4 ++--
> >>>  include/drm/drm_simple_kms_helper.h     | 2 +-
> >>>  4 files changed, 5 insertions(+), 5 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/cirrus/cirrus.c b/drivers/gpu/drm/cirrus/cirrus.c
> >>> index 7d08d067e1a4..248c9f765c45 100644
> >>> --- a/drivers/gpu/drm/cirrus/cirrus.c
> >>> +++ b/drivers/gpu/drm/cirrus/cirrus.c
> >>> @@ -390,7 +390,7 @@ static int cirrus_conn_init(struct cirrus_device *cirrus)
> >>>  /* ------------------------------------------------------------------ */
> >>>  /* cirrus (simple) display pipe                                            */
> >>>
> >>> -static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_crtc *crtc,
> >>> +static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
> >>>                                                  const struct drm_display_mode *mode)
> >>>  {
> >>>       if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
> >>> diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
> >>> index 046055719245..15fb516ae2d8 100644
> >>> --- a/drivers/gpu/drm/drm_simple_kms_helper.c
> >>> +++ b/drivers/gpu/drm/drm_simple_kms_helper.c
> >>> @@ -43,7 +43,7 @@ drm_simple_kms_crtc_mode_valid(struct drm_crtc *crtc,
> >>>               /* Anything goes */
> >>>               return MODE_OK;
> >>>
> >>> -     return pipe->funcs->mode_valid(crtc, mode);
> >>> +     return pipe->funcs->mode_valid(pipe, mode);
> >>>  }
> >>>
> >>>  static int drm_simple_kms_crtc_check(struct drm_crtc *crtc,
> >>> diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
> >>> index 024771a4083e..703ddc803c55 100644
> >>> --- a/drivers/gpu/drm/pl111/pl111_display.c
> >>> +++ b/drivers/gpu/drm/pl111/pl111_display.c
> >>> @@ -48,10 +48,10 @@ irqreturn_t pl111_irq(int irq, void *data)
> >>>  }
> >>>
> >>>  static enum drm_mode_status
> >>> -pl111_mode_valid(struct drm_crtc *crtc,
> >>> +pl111_mode_valid(struct drm_simple_display_pipe *pipe,
> >>>                const struct drm_display_mode *mode)
> >>>  {
> >>> -     struct drm_device *drm = crtc->dev;
> >>> +     struct drm_device *drm = pipe->crtc.dev;
> >>>       struct pl111_drm_dev_private *priv = drm->dev_private;
> >>>       u32 cpp = priv->variant->fb_bpp / 8;
> >>>       u64 bw;
> >>> diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
> >>> index 4d89cd0a60db..15afee9cf049 100644
> >>> --- a/include/drm/drm_simple_kms_helper.h
> >>> +++ b/include/drm/drm_simple_kms_helper.h
> >>> @@ -49,7 +49,7 @@ struct drm_simple_display_pipe_funcs {
> >>>        *
> >>>        * drm_mode_status Enum
> >>>        */
> >>> -     enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
> >>> +     enum drm_mode_status (*mode_valid)(struct drm_simple_display_pipe *pipe,
> >>>                                          const struct drm_display_mode *mode);
> >>>
> >>>       /**
> >>>
> >>
> >> --
> >> Thomas Zimmermann
> >> Graphics Driver Developer
> >> SUSE Software Solutions Germany GmbH
> >> Maxfeldstr. 5, 90409 Nürnberg, Germany
> >> (HRB 36809, AG Nürnberg)
> >> Geschäftsführer: Felix Imendörffer
> >>
> > 
> > 
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer
>

Patch
diff mbox series

diff --git a/drivers/gpu/drm/cirrus/cirrus.c b/drivers/gpu/drm/cirrus/cirrus.c
index 7d08d067e1a4..248c9f765c45 100644
--- a/drivers/gpu/drm/cirrus/cirrus.c
+++ b/drivers/gpu/drm/cirrus/cirrus.c
@@ -390,7 +390,7 @@  static int cirrus_conn_init(struct cirrus_device *cirrus)
 /* ------------------------------------------------------------------ */
 /* cirrus (simple) display pipe					      */
 
-static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_crtc *crtc,
+static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
 						   const struct drm_display_mode *mode)
 {
 	if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
index 046055719245..15fb516ae2d8 100644
--- a/drivers/gpu/drm/drm_simple_kms_helper.c
+++ b/drivers/gpu/drm/drm_simple_kms_helper.c
@@ -43,7 +43,7 @@  drm_simple_kms_crtc_mode_valid(struct drm_crtc *crtc,
 		/* Anything goes */
 		return MODE_OK;
 
-	return pipe->funcs->mode_valid(crtc, mode);
+	return pipe->funcs->mode_valid(pipe, mode);
 }
 
 static int drm_simple_kms_crtc_check(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 024771a4083e..703ddc803c55 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -48,10 +48,10 @@  irqreturn_t pl111_irq(int irq, void *data)
 }
 
 static enum drm_mode_status
-pl111_mode_valid(struct drm_crtc *crtc,
+pl111_mode_valid(struct drm_simple_display_pipe *pipe,
 		 const struct drm_display_mode *mode)
 {
-	struct drm_device *drm = crtc->dev;
+	struct drm_device *drm = pipe->crtc.dev;
 	struct pl111_drm_dev_private *priv = drm->dev_private;
 	u32 cpp = priv->variant->fb_bpp / 8;
 	u64 bw;
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
index 4d89cd0a60db..15afee9cf049 100644
--- a/include/drm/drm_simple_kms_helper.h
+++ b/include/drm/drm_simple_kms_helper.h
@@ -49,7 +49,7 @@  struct drm_simple_display_pipe_funcs {
 	 *
 	 * drm_mode_status Enum
 	 */
-	enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
+	enum drm_mode_status (*mode_valid)(struct drm_simple_display_pipe *pipe,
 					   const struct drm_display_mode *mode);
 
 	/**