@@ -207,6 +207,22 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
return &crtc_state->base;
}
+int intel_atomic_serialize_global_state(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+ struct intel_crtc *crtc;
+
+ for_each_intel_crtc(&dev_priv->drm, crtc) {
+ struct intel_crtc_state *crtc_state;
+
+ crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+ }
+
+ return 0;
+}
+
/**
* intel_crtc_destroy_state - destroy crtc state
* @crtc: drm crtc
@@ -7,6 +7,7 @@
#define __INTEL_ATOMIC_H__
#include <linux/types.h>
+#include "intel_display_types.h"
struct drm_atomic_state;
struct drm_connector;
@@ -38,6 +39,8 @@ void intel_crtc_destroy_state(struct drm_crtc *crtc,
struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
void intel_atomic_state_clear(struct drm_atomic_state *state);
+int intel_atomic_serialize_global_state(struct intel_atomic_state *state);
+
struct intel_crtc_state *
intel_atomic_get_crtc_state(struct drm_atomic_state *state,
struct intel_crtc *crtc);
@@ -8,6 +8,8 @@
#include "intel_bw.h"
#include "intel_display_types.h"
#include "intel_sideband.h"
+#include "intel_atomic.h"
+#include "intel_pm.h"
/* Parameters for Qclk Geyserville (QGV) */
struct intel_qgv_point {
@@ -113,6 +115,27 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
return 0;
}
+int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
+ u32 points_mask)
+{
+ int ret;
+
+ /* bspec says to keep retrying for at least 1 ms */
+ ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+ points_mask,
+ GEN11_PCODE_POINTS_RESTRICTED_MASK,
+ GEN11_PCODE_POINTS_RESTRICTED,
+ 1);
+
+ if (ret < 0) {
+ DRM_ERROR("Failed to disable qgv points (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+
static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
struct intel_qgv_info *qi)
{
@@ -270,22 +293,6 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv)
icl_get_bw_info(dev_priv, &icl_sa_info);
}
-static unsigned int intel_max_data_rate(struct drm_i915_private *dev_priv,
- int num_planes)
-{
- if (INTEL_GEN(dev_priv) >= 11)
- /*
- * FIXME with SAGV disabled maybe we can assume
- * point 1 will always be used? Seems to match
- * the behaviour observed in the wild.
- */
- return min3(icl_max_bw(dev_priv, num_planes, 0),
- icl_max_bw(dev_priv, num_planes, 1),
- icl_max_bw(dev_priv, num_planes, 2));
- else
- return UINT_MAX;
-}
-
static unsigned int intel_bw_crtc_num_active_planes(const struct intel_crtc_state *crtc_state)
{
/*
@@ -377,7 +384,10 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
unsigned int data_rate, max_data_rate;
unsigned int num_active_planes;
struct intel_crtc *crtc;
- int i;
+ int i, ret;
+ struct intel_qgv_info qi = {};
+ u32 allowed_points = 0;
+ unsigned int max_bw_point = 0, max_bw = 0;
/* FIXME earlier gens need some checks too */
if (INTEL_GEN(dev_priv) < 11)
@@ -421,16 +431,67 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
data_rate = intel_bw_data_rate(dev_priv, bw_state);
num_active_planes = intel_bw_num_active_planes(dev_priv, bw_state);
- max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
-
data_rate = DIV_ROUND_UP(data_rate, 1000);
- if (data_rate > max_data_rate) {
- DRM_DEBUG_KMS("Bandwidth %u MB/s exceeds max available %d MB/s (%d active planes)\n",
- data_rate, max_data_rate, num_active_planes);
+ ret = icl_get_qgv_points(dev_priv, &qi);
+ if (ret < 0)
+ return 0;
+
+ for (i = 0; i < qi.num_points; i++) {
+ max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
+ /*
+ * We need to know which qgv point gives us
+ * maximum bandwidth in order to disable SAGV
+ * if we find that we exceed SAGV block time
+ * with watermarks. By that moment we already
+ * have those, as it is calculated earlier in
+ * intel_atomic_check,
+ */
+ if (max_data_rate > max_bw) {
+ max_bw_point = i;
+ max_bw = max_data_rate;
+ }
+ if (max_data_rate >= data_rate)
+ allowed_points |= 1 << i;
+ DRM_DEBUG_KMS("QGV point %d: max bw %d required %d\n",
+ i, max_data_rate, data_rate);
+ }
+
+ /*
+ * BSpec states that we always should have at least one allowed point
+ * left, so if we couldn't - simply reject the configuration for obvious
+ * reasons.
+ */
+ if (allowed_points == 0) {
+ DRM_DEBUG_KMS("Could not find any suitable QGV points\n");
return -EINVAL;
}
+ /*
+ * Leave only single point with highest bandwidth, if
+ * we can't enable SAGV according to BSpec.
+ */
+ if (!intel_can_enable_sagv(state))
+ allowed_points = 1 << max_bw_point;
+
+ /*
+ * We store the ones which need to be masked as that is what PCode
+ * actually accepts as a parameter.
+ */
+ state->qgv_points_mask = (~allowed_points) & ((1 << qi.num_points) - 1);
+
+ /*
+ * If the actual mask had changed we need to make sure that
+ * the commits are serialized(in case this is a nomodeset, nonblocking)
+ */
+ if (state->qgv_points_mask != dev_priv->qgv_points_mask) {
+ ret = intel_atomic_serialize_global_state(state);
+ if (ret) {
+ DRM_DEBUG_KMS("Could not serialize global state\n");
+ return ret;
+ }
+ }
+
return 0;
}
@@ -28,5 +28,7 @@ int intel_bw_init(struct drm_i915_private *dev_priv);
int intel_bw_atomic_check(struct intel_atomic_state *state);
void intel_bw_crtc_update(struct intel_bw_state *bw_state,
const struct intel_crtc_state *crtc_state);
+int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
+ u32 points_mask);
#endif /* __INTEL_BW_H__ */
@@ -14471,6 +14471,48 @@ static void intel_atomic_cleanup_work(struct work_struct *work)
intel_atomic_helper_free_state(i915);
}
+static void intel_qgv_points_mask(struct intel_atomic_state *state)
+{
+ struct drm_device *dev = state->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ int ret;
+ u32 new_mask = dev_priv->qgv_points_mask | state->qgv_points_mask;
+
+ /*
+ * Restrict required qgv points before updating the configuration.
+ * According to BSpec we can't mask and unmask qgv points at the same
+ * time. Also masking should be done before updating the configuration
+ * and unmasking afterwards.
+ */
+ ret = icl_pcode_restrict_qgv_points(dev_priv, new_mask);
+ if (ret < 0)
+ DRM_DEBUG_KMS("Could not restrict required qgv points(%d)\n",
+ ret);
+ else
+ dev_priv->qgv_points_mask = new_mask;
+}
+
+static void intel_qgv_points_unmask(struct intel_atomic_state *state)
+{
+ struct drm_device *dev = state->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ int ret;
+ u32 new_mask = dev_priv->qgv_points_mask & state->qgv_points_mask;
+
+ /*
+ * Allow required qgv points after updating the configuration.
+ * According to BSpec we can't mask and unmask qgv points at the same
+ * time. Also masking should be done before updating the configuration
+ * and unmasking afterwards.
+ */
+ ret = icl_pcode_restrict_qgv_points(dev_priv, new_mask);
+ if (ret < 0)
+ DRM_DEBUG_KMS("Could not restrict required qgv points(%d)\n",
+ ret);
+ else
+ dev_priv->qgv_points_mask = new_mask;
+}
+
static void intel_atomic_commit_tail(struct intel_atomic_state *state)
{
struct drm_device *dev = state->base.dev;
@@ -14498,6 +14540,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
}
}
+ if ((INTEL_GEN(dev_priv) >= 11))
+ intel_qgv_points_mask(state);
+
intel_commit_modeset_disables(state);
/* FIXME: Eventually get rid of our crtc->config pointer */
@@ -14516,8 +14561,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
* SKL workaround: bspec recommends we disable the SAGV when we
* have more then one pipe enabled
*/
- if (!intel_can_enable_sagv(state))
- intel_disable_sagv(dev_priv);
+ if (INTEL_GEN(dev_priv) < 11)
+ if (!intel_can_enable_sagv(state))
+ intel_disable_sagv(dev_priv);
intel_modeset_verify_disabled(dev_priv, state);
}
@@ -14595,8 +14641,12 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
if (state->modeset)
intel_verify_planes(state);
- if (state->modeset && intel_can_enable_sagv(state))
- intel_enable_sagv(dev_priv);
+ if (INTEL_GEN(dev_priv) < 11) {
+ if (state->modeset && intel_can_enable_sagv(state))
+ intel_enable_sagv(dev_priv);
+ }
+ else
+ intel_qgv_points_unmask(state);
drm_atomic_helper_commit_hw_done(&state->base);
@@ -519,6 +519,9 @@ struct intel_atomic_state {
struct i915_sw_fence commit_ready;
struct llist_node freed;
+
+ /* Gen11+ only */
+ u32 qgv_points_mask;
};
struct intel_plane_state {
@@ -1327,6 +1327,8 @@ struct drm_i915_private {
u8 num_planes;
} max_bw[6];
+ u32 qgv_points_mask;
+
struct drm_private_obj bw_obj;
struct intel_runtime_pm runtime_pm;
@@ -8879,6 +8879,7 @@ enum {
#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd
#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
+#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
#define GEN6_PCODE_READ_D_COMP 0x10
#define GEN6_PCODE_WRITE_D_COMP 0x11
#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
@@ -8891,6 +8892,8 @@ enum {
#define GEN9_SAGV_IS_DISABLED 0x1
#define GEN9_SAGV_ENABLE 0x3
#define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US 0x23
+#define GEN11_PCODE_POINTS_RESTRICTED 0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK 0x1
#define GEN6_PCODE_DATA _MMIO(0x138128)
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
According to BSpec 53998, we should try to restrict qgv points, which can't provide enough bandwidth for desired display configuration. Currently we are just comparing against all of those and take minimum(worst case). v2: Fixed wrong PCode reply mask, removed hardcoded values. v3: Forbid simultaneous legacy SAGV PCode requests and restricting qgv points. Put the actual restriction to commit function, added serialization(thanks to Ville) to prevent commit being applied out of order in case of nonblocking and/or nomodeset commits. v4: - Minor code refactoring, fixed few typos(thanks to James Ausmus) - Change the naming of qgv point masking/unmasking functions(James Ausmus). - Simplify the masking/unmasking operation itself, as we don't need to mask only single point per request(James Ausmus) - Reject and stick to highest bandwidth point if SAGV can't be enabled(BSpec) Reviewed-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@intel.com> Cc: James Ausmus <james.ausmus@intel.com> --- drivers/gpu/drm/i915/display/intel_atomic.c | 16 +++ drivers/gpu/drm/i915/display/intel_atomic.h | 3 + drivers/gpu/drm/i915/display/intel_bw.c | 105 ++++++++++++++---- drivers/gpu/drm/i915/display/intel_bw.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 58 +++++++++- .../drm/i915/display/intel_display_types.h | 3 + drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/i915_reg.h | 3 + 8 files changed, 166 insertions(+), 26 deletions(-)