diff mbox series

[v3,2/2] gpio: Add xgs-iproc driver

Message ID 20191024004816.5539-3-chris.packham@alliedtelesis.co.nz (mailing list archive)
State New, archived
Headers show
Series gpio: brcm: XGS iProc GPIO driver | expand

Commit Message

Chris Packham Oct. 24, 2019, 12:48 a.m. UTC 
This driver supports the Chip Common A GPIO controller present on a
number of Broadcom switch ASICs with integrated SoCs. The controller is
similar to the pinctrl-nsp-gpio and pinctrl-iproc-gpio blocks but
different enough that a separate driver is required.

This has been ported from Broadcom's XLDK 5.0.3 retaining only the CCA
support (pinctrl-iproc-gpio covers CCB).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v3:
    - prefix local #defines with 'IPROC'
    - use {readl,writel}_relaxed
    - remove unnecessary headers
    - actually use spinlock to guard hardware accesses
    
    Changes in v2:
    - use more of the generic infrastructure for gpio chips
    - handling the root interrupt is still done manually due to sharing with uart0.

 drivers/gpio/Kconfig          |   9 +
 drivers/gpio/Makefile         |   1 +
 drivers/gpio/gpio-xgs-iproc.c | 321 ++++++++++++++++++++++++++++++++++
 3 files changed, 331 insertions(+)
 create mode 100644 drivers/gpio/gpio-xgs-iproc.c

Comments

Scott Branden Oct. 24, 2019, 4:39 p.m. UTC | #1 
Hi Chris,

Some cleanups.

On 2019-10-23 5:48 p.m., Chris Packham wrote:
> This driver supports the Chip Common A GPIO controller present on a
> number of Broadcom switch ASICs with integrated SoCs. The controller is
> similar to the pinctrl-nsp-gpio and pinctrl-iproc-gpio blocks but
> different enough that a separate driver is required.
>
> This has been ported from Broadcom's XLDK 5.0.3 retaining only the CCA
> support (pinctrl-iproc-gpio covers CCB).
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>
> Notes:
>      Changes in v3:
>      - prefix local #defines with 'IPROC'
>      - use {readl,writel}_relaxed
>      - remove unnecessary headers
>      - actually use spinlock to guard hardware accesses
>      
>      Changes in v2:
>      - use more of the generic infrastructure for gpio chips
>      - handling the root interrupt is still done manually due to sharing with uart0.
>
>   drivers/gpio/Kconfig          |   9 +
>   drivers/gpio/Makefile         |   1 +
>   drivers/gpio/gpio-xgs-iproc.c | 321 ++++++++++++++++++++++++++++++++++
>   3 files changed, 331 insertions(+)
>   create mode 100644 drivers/gpio/gpio-xgs-iproc.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 38e096e6925f..4b3c0f8397d7 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -156,6 +156,15 @@ config GPIO_BRCMSTB
>   	help
>   	  Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
>   
> +config GPIO_XGS_IPROC
Place config option in alpha order in this file, like the rest of the 
config options.  Perhaps change the name to CONFIG_BCM_GPIO_XGS_IPROC
> +	tristate "BRCM XGS iProc GPIO support"
> +	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
> +	select GPIO_GENERIC
> +	select GPIOLIB_IRQCHIP
> +	default ARCH_BCM_IPROC
> +	help
> +	  Say yes here to enable GPIO support for Broadcom XGS iProc SoCs.
> +
>   config GPIO_CADENCE
>   	tristate "Cadence GPIO support"
>   	depends on OF_GPIO
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index d2fd19c15bae..3783c3d43fbe 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_GPIO_BCM_KONA)		+= gpio-bcm-kona.o
>   obj-$(CONFIG_GPIO_BD70528)		+= gpio-bd70528.o
>   obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd9571mwv.o
>   obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
> +obj-$(CONFIG_GPIO_XGS_IPROC)		+= gpio-xgs-iproc.o
config options are in alpha order
>   obj-$(CONFIG_GPIO_BT8XX)		+= gpio-bt8xx.o
>   obj-$(CONFIG_GPIO_CADENCE)		+= gpio-cadence.o
>   obj-$(CONFIG_GPIO_CLPS711X)		+= gpio-clps711x.o
> diff --git a/drivers/gpio/gpio-xgs-iproc.c b/drivers/gpio/gpio-xgs-iproc.c
> new file mode 100644
> index 000000000000..fcf41cf9efc3
> --- /dev/null
> +++ b/drivers/gpio/gpio-xgs-iproc.c
> @@ -0,0 +1,321 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2017 Broadcom Corporation
Change "Broadcom Corporation" to "Broadcom."
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
#includes should be in alpha order
> +
> +#define IPROC_CCA_INT_F_GPIOINT		BIT(0)
> +#define IPROC_CCA_INT_STS		0x20
> +#define IPROC_CCA_INT_MASK		0x24
> +
> +#define IPROC_GPIO_CCA_DIN		0x0
> +#define IPROC_GPIO_CCA_DOUT		0x4
> +#define IPROC_GPIO_CCA_OUT_EN		0x8
> +#define IPROC_GPIO_CCA_INT_LEVEL	0x10
> +#define IPROC_GPIO_CCA_INT_LEVEL_MASK	0x14
> +#define IPROC_GPIO_CCA_INT_EVENT	0x18
> +#define IPROC_GPIO_CCA_INT_EVENT_MASK	0x1C
> +#define IPROC_GPIO_CCA_INT_EDGE		0x24
> +
> +struct iproc_gpio_chip {
> +	struct irq_chip irqchip;
> +	struct gpio_chip gc;
> +	spinlock_t lock;
> +	struct device *dev;
> +	void __iomem *base;
> +	void __iomem *intr;
> +};
> +
> +static inline struct iproc_gpio_chip *
> +to_iproc_gpio(struct gpio_chip *gc)
> +{
> +	return container_of(gc, struct iproc_gpio_chip, gc);
> +}
> +
> +static void iproc_gpio_irq_ack(struct irq_data *d)
> +{
> +	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
> +	int pin = d->hwirq;
> +	unsigned long flags;
> +	u32 irq = d->irq;
> +	u32 irq_type, event_status = 0;
> +
> +	spin_lock_irqsave(&chip->lock, flags);
> +	irq_type = irq_get_trigger_type(irq);
> +	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
> +		event_status |= BIT(pin);
> +		writel_relaxed(event_status,
> +			       chip->base + IPROC_GPIO_CCA_INT_EVENT);
> +	}
> +	spin_unlock_irqrestore(&chip->lock, flags);
> +}
> +
> +static void iproc_gpio_irq_unmask(struct irq_data *d)
> +{
> +	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
> +	int pin = d->hwirq;
> +	unsigned long flags;
> +	u32 irq = d->irq;
> +	u32 int_mask, irq_type, event_mask;
> +
> +	spin_lock_irqsave(&chip->lock, flags);
> +	irq_type = irq_get_trigger_type(irq);
> +	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
> +	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
> +
> +	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
> +		event_mask |= 1 << pin;
> +		writel_relaxed(event_mask,
> +			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
> +	} else {
> +		int_mask |= 1 << pin;
> +		writel_relaxed(int_mask,
> +			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
> +	}
> +	spin_unlock_irqrestore(&chip->lock, flags);
> +}
> +
> +static void iproc_gpio_irq_mask(struct irq_data *d)
> +{
> +	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
> +	int pin = d->hwirq;
> +	unsigned long flags;
> +	u32 irq = d->irq;
> +	u32 irq_type, int_mask, event_mask;
> +
> +	spin_lock_irqsave(&chip->lock, flags);
> +	irq_type = irq_get_trigger_type(irq);
> +	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
> +	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
> +
> +	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
> +		event_mask &= ~BIT(pin);
> +		writel_relaxed(event_mask,
> +			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
> +	} else {
> +		int_mask &= ~BIT(pin);
> +		writel_relaxed(int_mask,
> +			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
> +	}
> +	spin_unlock_irqrestore(&chip->lock, flags);
> +}
> +
> +static int iproc_gpio_irq_set_type(struct irq_data *d, u32 type)
> +{
> +	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
> +	int pin = d->hwirq;
> +	unsigned long flags;
> +	u32 irq = d->irq;
> +	u32 event_pol, int_pol;
> +	int ret = 0;
> +
> +	spin_lock_irqsave(&chip->lock, flags);
> +	switch (type & IRQ_TYPE_SENSE_MASK) {
> +	case IRQ_TYPE_EDGE_RISING:
> +		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
> +		event_pol &= ~BIT(pin);
> +		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
> +		break;
> +	case IRQ_TYPE_EDGE_FALLING:
> +		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
> +		event_pol |= BIT(pin);
> +		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
> +		break;
> +	case IRQ_TYPE_LEVEL_HIGH:
> +		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
> +		int_pol &= ~BIT(pin);
> +		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
> +		break;
> +	case IRQ_TYPE_LEVEL_LOW:
> +		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
> +		int_pol |= BIT(pin);
> +		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
> +		break;
> +	default:
> +		/* should not come here */
> +		ret = -EINVAL;
> +		goto out_unlock;
> +	}
> +
> +	if (type & IRQ_TYPE_LEVEL_MASK)
> +		irq_set_handler_locked(irq_get_irq_data(irq), handle_level_irq);
> +	else if (type & IRQ_TYPE_EDGE_BOTH)
> +		irq_set_handler_locked(irq_get_irq_data(irq), handle_edge_irq);
> +
> +out_unlock:
> +	spin_unlock_irqrestore(&chip->lock, flags);
> +
> +	return ret;
> +}
> +
> +static irqreturn_t iproc_gpio_irq_handler(int irq, void *data)
> +{
> +	struct gpio_chip *gc = (struct gpio_chip *)data;
> +	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
> +	int bit;
> +	unsigned long int_bits = 0;
> +	u32 int_status;
> +
> +	/* go through the entire GPIOs and handle all interrupts */
> +	int_status = readl_relaxed(chip->intr + IPROC_CCA_INT_STS);
> +	if (int_status & IPROC_CCA_INT_F_GPIOINT) {
> +		u32 event, level;
> +
> +		/* Get level and edge interrupts */
> +		event =
> +		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
> +		event &= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT);
> +		level = readl_relaxed(chip->base + IPROC_GPIO_CCA_DIN);
> +		level ^= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
> +		level &=
> +		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
> +		int_bits = level | event;
> +
> +		for_each_set_bit(bit, &int_bits, gc->ngpio)
> +			generic_handle_irq(irq_linear_revmap(gc->irq.domain, bit));
> +	}
> +
> +	return int_bits ? IRQ_HANDLED : IRQ_NONE;
> +}
> +
> +static int iproc_gpio_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *dn = pdev->dev.of_node;
> +	struct iproc_gpio_chip *chip;
> +	u32 num_gpios;
> +	int irq, ret;
> +
> +	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
> +	if (!chip)
> +		return -ENOMEM;
> +
> +	chip->dev = dev;
> +	platform_set_drvdata(pdev, chip);
> +	spin_lock_init(&chip->lock);
> +
> +	chip->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(chip->base))
> +		return PTR_ERR(chip->base);
> +
> +	ret = bgpio_init(&chip->gc, dev, 4,
> +			 chip->base + IPROC_GPIO_CCA_DIN,
> +			 chip->base + IPROC_GPIO_CCA_DOUT,
> +			 NULL,
> +			 chip->base + IPROC_GPIO_CCA_OUT_EN,
> +			 NULL,
> +			 0);
> +	if (ret) {
> +		dev_err(dev, "unable to init GPIO chip\n");
> +		return ret;
> +	}
> +
> +	chip->gc.label = dev_name(dev);
> +	if (of_property_read_u32(dn, "ngpios", &num_gpios))
> +		chip->gc.ngpio = num_gpios;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq > 0) {
> +		struct gpio_irq_chip *girq;
> +		struct irq_chip *irqc;
> +		u32 val;
> +
> +		irqc = &chip->irqchip;
> +		irqc->name = dev_name(dev);
> +		irqc->irq_ack = iproc_gpio_irq_ack;
> +		irqc->irq_mask = iproc_gpio_irq_mask;
> +		irqc->irq_unmask = iproc_gpio_irq_unmask;
> +		irqc->irq_set_type = iproc_gpio_irq_set_type;
> +
> +		chip->intr = devm_platform_ioremap_resource(pdev, 1);
> +		if (IS_ERR(chip->intr))
> +			return PTR_ERR(chip->intr);
> +
> +		/* Enable GPIO interrupts for CCA GPIO */
> +		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
> +		val |= IPROC_CCA_INT_F_GPIOINT;
> +		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
> +
> +		/*
> +		 * Directly request the irq here instead of passing
> +		 * a flow-handler to gpiochip_set_chained_irqchip,
> +		 * because the irq is shared.
> +		 */
> +		ret = devm_request_irq(dev, irq, iproc_gpio_irq_handler,
> +				       IRQF_SHARED, chip->gc.label, &chip->gc);
> +		if (ret) {
> +			dev_err(dev, "Fail to request IRQ%d: %d\n", irq, ret);
> +			return ret;
> +		}
> +
> +		girq = &chip->gc.irq;
> +		girq->chip = irqc;
> +		/* This will let us handle the parent IRQ in the driver */
> +		girq->parent_handler = NULL;
> +		girq->num_parents = 0;
> +		girq->parents = NULL;
> +		girq->default_type = IRQ_TYPE_NONE;
> +		girq->handler = handle_simple_irq;
> +	}
> +
> +	ret = devm_gpiochip_add_data(dev, &chip->gc, chip);
> +	if (ret) {
> +		dev_err(dev, "unable to add GPIO chip\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __exit iproc_gpio_remove(struct platform_device *pdev)
> +{
> +	struct iproc_gpio_chip *chip;
> +
> +	chip = platform_get_drvdata(pdev);
> +	if (!chip)
> +		return -ENODEV;
> +
> +	if (chip->intr) {
> +		u32 val;
> +
> +		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
> +		val &= ~IPROC_CCA_INT_F_GPIOINT;
> +		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id bcm_iproc_gpio_of_match[] __initconst = {
> +	{ .compatible = "brcm,iproc-gpio-cca" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, bcm_iproc_gpio_of_match);
> +
> +static struct platform_driver bcm_iproc_gpio_driver = {
> +	.driver = {
> +		.name = "iproc-xgs-gpio",
> +		.owner = THIS_MODULE,
> +		.of_match_table = bcm_iproc_gpio_of_match,
> +	},
> +	.probe = iproc_gpio_probe,
> +	.remove = iproc_gpio_remove,
> +};
> +
> +module_platform_driver(bcm_iproc_gpio_driver);
> +
> +MODULE_DESCRIPTION("XGS IPROC GPIO driver");
> +MODULE_LICENSE("GPL v2");
diff mbox series

Patch

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 38e096e6925f..4b3c0f8397d7 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -156,6 +156,15 @@  config GPIO_BRCMSTB
 	help
 	  Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
 
+config GPIO_XGS_IPROC
+	tristate "BRCM XGS iProc GPIO support"
+	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	default ARCH_BCM_IPROC
+	help
+	  Say yes here to enable GPIO support for Broadcom XGS iProc SoCs.
+
 config GPIO_CADENCE
 	tristate "Cadence GPIO support"
 	depends on OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d2fd19c15bae..3783c3d43fbe 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -37,6 +37,7 @@  obj-$(CONFIG_GPIO_BCM_KONA)		+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BD70528)		+= gpio-bd70528.o
 obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
+obj-$(CONFIG_GPIO_XGS_IPROC)		+= gpio-xgs-iproc.o
 obj-$(CONFIG_GPIO_BT8XX)		+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CADENCE)		+= gpio-cadence.o
 obj-$(CONFIG_GPIO_CLPS711X)		+= gpio-clps711x.o
diff --git a/drivers/gpio/gpio-xgs-iproc.c b/drivers/gpio/gpio-xgs-iproc.c
new file mode 100644
index 000000000000..fcf41cf9efc3
--- /dev/null
+++ b/drivers/gpio/gpio-xgs-iproc.c
@@ -0,0 +1,321 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Broadcom Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define IPROC_CCA_INT_F_GPIOINT		BIT(0)
+#define IPROC_CCA_INT_STS		0x20
+#define IPROC_CCA_INT_MASK		0x24
+
+#define IPROC_GPIO_CCA_DIN		0x0
+#define IPROC_GPIO_CCA_DOUT		0x4
+#define IPROC_GPIO_CCA_OUT_EN		0x8
+#define IPROC_GPIO_CCA_INT_LEVEL	0x10
+#define IPROC_GPIO_CCA_INT_LEVEL_MASK	0x14
+#define IPROC_GPIO_CCA_INT_EVENT	0x18
+#define IPROC_GPIO_CCA_INT_EVENT_MASK	0x1C
+#define IPROC_GPIO_CCA_INT_EDGE		0x24
+
+struct iproc_gpio_chip {
+	struct irq_chip irqchip;
+	struct gpio_chip gc;
+	spinlock_t lock;
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *intr;
+};
+
+static inline struct iproc_gpio_chip *
+to_iproc_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct iproc_gpio_chip, gc);
+}
+
+static void iproc_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 irq_type, event_status = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_status |= BIT(pin);
+		writel_relaxed(event_status,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 int_mask, irq_type, event_mask;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_mask |= 1 << pin;
+		writel_relaxed(event_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	} else {
+		int_mask |= 1 << pin;
+		writel_relaxed(int_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 irq_type, int_mask, event_mask;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_mask &= ~BIT(pin);
+		writel_relaxed(event_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	} else {
+		int_mask &= ~BIT(pin);
+		writel_relaxed(int_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int iproc_gpio_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 event_pol, int_pol;
+	int ret = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		event_pol &= ~BIT(pin);
+		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		event_pol |= BIT(pin);
+		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		int_pol &= ~BIT(pin);
+		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		int_pol |= BIT(pin);
+		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		break;
+	default:
+		/* should not come here */
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(irq_get_irq_data(irq), handle_level_irq);
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(irq_get_irq_data(irq), handle_edge_irq);
+
+out_unlock:
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t iproc_gpio_irq_handler(int irq, void *data)
+{
+	struct gpio_chip *gc = (struct gpio_chip *)data;
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int bit;
+	unsigned long int_bits = 0;
+	u32 int_status;
+
+	/* go through the entire GPIOs and handle all interrupts */
+	int_status = readl_relaxed(chip->intr + IPROC_CCA_INT_STS);
+	if (int_status & IPROC_CCA_INT_F_GPIOINT) {
+		u32 event, level;
+
+		/* Get level and edge interrupts */
+		event =
+		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+		event &= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT);
+		level = readl_relaxed(chip->base + IPROC_GPIO_CCA_DIN);
+		level ^= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		level &=
+		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+		int_bits = level | event;
+
+		for_each_set_bit(bit, &int_bits, gc->ngpio)
+			generic_handle_irq(irq_linear_revmap(gc->irq.domain, bit));
+	}
+
+	return int_bits ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int iproc_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = pdev->dev.of_node;
+	struct iproc_gpio_chip *chip;
+	u32 num_gpios;
+	int irq, ret;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+	spin_lock_init(&chip->lock);
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	ret = bgpio_init(&chip->gc, dev, 4,
+			 chip->base + IPROC_GPIO_CCA_DIN,
+			 chip->base + IPROC_GPIO_CCA_DOUT,
+			 NULL,
+			 chip->base + IPROC_GPIO_CCA_OUT_EN,
+			 NULL,
+			 0);
+	if (ret) {
+		dev_err(dev, "unable to init GPIO chip\n");
+		return ret;
+	}
+
+	chip->gc.label = dev_name(dev);
+	if (of_property_read_u32(dn, "ngpios", &num_gpios))
+		chip->gc.ngpio = num_gpios;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		struct gpio_irq_chip *girq;
+		struct irq_chip *irqc;
+		u32 val;
+
+		irqc = &chip->irqchip;
+		irqc->name = dev_name(dev);
+		irqc->irq_ack = iproc_gpio_irq_ack;
+		irqc->irq_mask = iproc_gpio_irq_mask;
+		irqc->irq_unmask = iproc_gpio_irq_unmask;
+		irqc->irq_set_type = iproc_gpio_irq_set_type;
+
+		chip->intr = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(chip->intr))
+			return PTR_ERR(chip->intr);
+
+		/* Enable GPIO interrupts for CCA GPIO */
+		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
+		val |= IPROC_CCA_INT_F_GPIOINT;
+		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
+
+		/*
+		 * Directly request the irq here instead of passing
+		 * a flow-handler to gpiochip_set_chained_irqchip,
+		 * because the irq is shared.
+		 */
+		ret = devm_request_irq(dev, irq, iproc_gpio_irq_handler,
+				       IRQF_SHARED, chip->gc.label, &chip->gc);
+		if (ret) {
+			dev_err(dev, "Fail to request IRQ%d: %d\n", irq, ret);
+			return ret;
+		}
+
+		girq = &chip->gc.irq;
+		girq->chip = irqc;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+	}
+
+	ret = devm_gpiochip_add_data(dev, &chip->gc, chip);
+	if (ret) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __exit iproc_gpio_remove(struct platform_device *pdev)
+{
+	struct iproc_gpio_chip *chip;
+
+	chip = platform_get_drvdata(pdev);
+	if (!chip)
+		return -ENODEV;
+
+	if (chip->intr) {
+		u32 val;
+
+		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
+		val &= ~IPROC_CCA_INT_F_GPIOINT;
+		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm_iproc_gpio_of_match[] __initconst = {
+	{ .compatible = "brcm,iproc-gpio-cca" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_gpio_of_match);
+
+static struct platform_driver bcm_iproc_gpio_driver = {
+	.driver = {
+		.name = "iproc-xgs-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm_iproc_gpio_of_match,
+	},
+	.probe = iproc_gpio_probe,
+	.remove = iproc_gpio_remove,
+};
+
+module_platform_driver(bcm_iproc_gpio_driver);
+
+MODULE_DESCRIPTION("XGS IPROC GPIO driver");
+MODULE_LICENSE("GPL v2");