[04/10] powerpc: Map & release OpenCAPI LPC memory
diff mbox series

Message ID 20191025044721.16617-5-alastair@au1.ibm.com
State Superseded
Headers show
Series
  • Add support for OpenCAPI SCM devices
Related show

Commit Message

Alastair D'Silva Oct. 25, 2019, 4:46 a.m. UTC
From: Alastair D'Silva <alastair@d-silva.org>

This patch adds platform support to map & release LPC memory.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
---
 arch/powerpc/include/asm/pnv-ocxl.h   |  2 ++
 arch/powerpc/platforms/powernv/ocxl.c | 41 +++++++++++++++++++++++++++
 include/linux/memory_hotplug.h        |  5 ++++
 mm/memory_hotplug.c                   |  3 +-
 4 files changed, 50 insertions(+), 1 deletion(-)

Comments

Andrew Donnellan Oct. 29, 2019, 1:49 a.m. UTC | #1
On 25/10/19 3:46 pm, Alastair D'Silva wrote:
> From: Alastair D'Silva <alastair@d-silva.org>
> 
> This patch adds platform support to map & release LPC memory.
>  > Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
>   arch/powerpc/include/asm/pnv-ocxl.h   |  2 ++
>   arch/powerpc/platforms/powernv/ocxl.c | 41 +++++++++++++++++++++++++++
>   include/linux/memory_hotplug.h        |  5 ++++
>   mm/memory_hotplug.c                   |  3 +-
>   4 files changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
> index 7de82647e761..f8f8ffb48aa8 100644
> --- a/arch/powerpc/include/asm/pnv-ocxl.h
> +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> @@ -32,5 +32,7 @@ extern int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>   
>   extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
>   extern void pnv_ocxl_free_xive_irq(u32 irq);
> +extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size);
> +extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
>   
>   #endif /* _ASM_PNV_OCXL_H */
> diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
> index 8c65aacda9c8..c6d4234e0aba 100644
> --- a/arch/powerpc/platforms/powernv/ocxl.c
> +++ b/arch/powerpc/platforms/powernv/ocxl.c
> @@ -475,6 +475,47 @@ void pnv_ocxl_spa_release(void *platform_data)
>   }
>   EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
>   
> +u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;

I think pci_dev_id() is the canonical way to do this? (same applies in 
release)

> +	u64 base_addr = 0;
> +	int rc;
> +
> +	rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size, &base_addr);
> +	if (rc) {
> +		dev_warn(&pdev->dev,
> +			 "OPAL could not allocate LPC memory, rc=%d\n", rc);
> +		return 0;
> +	}
> +
> +	base_addr = be64_to_cpu(base_addr);

sparse doesn't like this, the way it's usually done is declare a __be64 
variable, pass that to the opal call, then store the conversion in a 
regular u64

> +
> +	rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
> +					      size >> PAGE_SHIFT);
> +	if (rc)
> +		return 0;
> +
> +	return base_addr;
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
> +
> +void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	int rc;
> +
> +	rc = opal_npu_mem_release(phb->opal_id, bdfn);
> +	if (rc)
> +		dev_warn(&pdev->dev,
> +			 "OPAL reported rc=%d when releasing LPC memory\n", rc);
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
> +
> +
>   int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>   {
>   	struct spa_data *data = (struct spa_data *) platform_data;
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index f46ea71b4ffd..3f5f1a642abe 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -339,6 +339,11 @@ static inline int remove_memory(int nid, u64 start, u64 size)
>   static inline void __remove_memory(int nid, u64 start, u64 size) {}
>   #endif /* CONFIG_MEMORY_HOTREMOVE */
>   
> +#if CONFIG_MEMORY_HOTPLUG_SPARSE

This needs to be #ifdef.

> +int check_hotplug_memory_addressable(unsigned long pfn,
> +		unsigned long nr_pages);
> +#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
> +
>   extern void __ref free_area_init_core_hotplug(int nid);
>   extern int __add_memory(int nid, u64 start, u64 size);
>   extern int add_memory(int nid, u64 start, u64 size);
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 2cecf07b396f..b39827dbd071 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -278,7 +278,7 @@ static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,
>   	return 0;
>   }
>   
> -static int check_hotplug_memory_addressable(unsigned long pfn,
> +int check_hotplug_memory_addressable(unsigned long pfn,
>   					    unsigned long nr_pages)
>   {
>   	const u64 max_addr = PFN_PHYS(pfn + nr_pages) - 1;
> @@ -294,6 +294,7 @@ static int check_hotplug_memory_addressable(unsigned long pfn,
>   
>   	return 0;
>   }
> +EXPORT_SYMBOL_GPL(check_hotplug_memory_addressable);

This export seems unnecessary, you don't seem to be using this function 
in a module anywhere in this series AFAICT.

Also it looks like a whitespace fix from removing the static ended up in 
patch #8 rather than here.

>   
>   /*
>    * Reasonably generic function for adding memory.  It is
>
Alastair D'Silva Oct. 29, 2019, 2:44 a.m. UTC | #2
On Tue, 2019-10-29 at 12:49 +1100, Andrew Donnellan wrote:
> On 25/10/19 3:46 pm, Alastair D'Silva wrote:
> > From: Alastair D'Silva <alastair@d-silva.org>
> > 
> > This patch adds platform support to map & release LPC memory.
> >  > Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> > ---
> >   arch/powerpc/include/asm/pnv-ocxl.h   |  2 ++
> >   arch/powerpc/platforms/powernv/ocxl.c | 41
> > +++++++++++++++++++++++++++
> >   include/linux/memory_hotplug.h        |  5 ++++
> >   mm/memory_hotplug.c                   |  3 +-
> >   4 files changed, 50 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/powerpc/include/asm/pnv-ocxl.h
> > b/arch/powerpc/include/asm/pnv-ocxl.h
> > index 7de82647e761..f8f8ffb48aa8 100644
> > --- a/arch/powerpc/include/asm/pnv-ocxl.h
> > +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> > @@ -32,5 +32,7 @@ extern int pnv_ocxl_spa_remove_pe_from_cache(void
> > *platform_data, int pe_handle)
> >   
> >   extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
> >   extern void pnv_ocxl_free_xive_irq(u32 irq);
> > +extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64
> > size);
> > +extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
> >   
> >   #endif /* _ASM_PNV_OCXL_H */
> > diff --git a/arch/powerpc/platforms/powernv/ocxl.c
> > b/arch/powerpc/platforms/powernv/ocxl.c
> > index 8c65aacda9c8..c6d4234e0aba 100644
> > --- a/arch/powerpc/platforms/powernv/ocxl.c
> > +++ b/arch/powerpc/platforms/powernv/ocxl.c
> > @@ -475,6 +475,47 @@ void pnv_ocxl_spa_release(void *platform_data)
> >   }
> >   EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
> >   
> > +u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
> > +{
> > +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> > +	struct pnv_phb *phb = hose->private_data;
> > +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> 
> I think pci_dev_id() is the canonical way to do this? (same applies
> in 
> release)

Thanks.

> 
> > +	u64 base_addr = 0;
> > +	int rc;
> > +
> > +	rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size, &base_addr);
> > +	if (rc) {
> > +		dev_warn(&pdev->dev,
> > +			 "OPAL could not allocate LPC memory, rc=%d\n",
> > rc);
> > +		return 0;
> > +	}
> > +
> > +	base_addr = be64_to_cpu(base_addr);
> 
> sparse doesn't like this, the way it's usually done is declare a
> __be64 
> variable, pass that to the opal call, then store the conversion in a 
> regular u64
> 

Ok.

> > +
> > +	rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
> > +					      size >> PAGE_SHIFT);
> > +	if (rc)
> > +		return 0;
> > +
> > +	return base_addr;
> > +}
> > +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
> > +
> > +void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
> > +{
> > +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> > +	struct pnv_phb *phb = hose->private_data;
> > +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> > +	int rc;
> > +
> > +	rc = opal_npu_mem_release(phb->opal_id, bdfn);
> > +	if (rc)
> > +		dev_warn(&pdev->dev,
> > +			 "OPAL reported rc=%d when releasing LPC
> > memory\n", rc);
> > +}
> > +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
> > +
> > +
> >   int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int
> > pe_handle)
> >   {
> >   	struct spa_data *data = (struct spa_data *) platform_data;
> > diff --git a/include/linux/memory_hotplug.h
> > b/include/linux/memory_hotplug.h
> > index f46ea71b4ffd..3f5f1a642abe 100644
> > --- a/include/linux/memory_hotplug.h
> > +++ b/include/linux/memory_hotplug.h
> > @@ -339,6 +339,11 @@ static inline int remove_memory(int nid, u64
> > start, u64 size)
> >   static inline void __remove_memory(int nid, u64 start, u64 size)
> > {}
> >   #endif /* CONFIG_MEMORY_HOTREMOVE */
> >   
> > +#if CONFIG_MEMORY_HOTPLUG_SPARSE
> 
> This needs to be #ifdef.
> 

Yup, 0 day caught that one too :)

> > +int check_hotplug_memory_addressable(unsigned long pfn,
> > +		unsigned long nr_pages);
> > +#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
> > +
> >   extern void __ref free_area_init_core_hotplug(int nid);
> >   extern int __add_memory(int nid, u64 start, u64 size);
> >   extern int add_memory(int nid, u64 start, u64 size);
> > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > index 2cecf07b396f..b39827dbd071 100644
> > --- a/mm/memory_hotplug.c
> > +++ b/mm/memory_hotplug.c
> > @@ -278,7 +278,7 @@ static int check_pfn_span(unsigned long pfn,
> > unsigned long nr_pages,
> >   	return 0;
> >   }
> >   
> > -static int check_hotplug_memory_addressable(unsigned long pfn,
> > +int check_hotplug_memory_addressable(unsigned long pfn,
> >   					    unsigned long nr_pages)
> >   {
> >   	const u64 max_addr = PFN_PHYS(pfn + nr_pages) - 1;
> > @@ -294,6 +294,7 @@ static int
> > check_hotplug_memory_addressable(unsigned long pfn,
> >   
> >   	return 0;
> >   }
> > +EXPORT_SYMBOL_GPL(check_hotplug_memory_addressable);
> 
> This export seems unnecessary, you don't seem to be using this
> function 
> in a module anywhere in this series AFAICT.
> 

This is used within this patch, in the map call.

> Also it looks like a whitespace fix from removing the static ended up
> in 
> patch #8 rather than here.

Thanks.

> 
> >   
> >   /*
> >    * Reasonably generic function for adding memory.  It is
> >
Andrew Donnellan Oct. 29, 2019, 2:47 a.m. UTC | #3
On 29/10/19 1:44 pm, Alastair D'Silva wrote:
> This is used within this patch, in the map call.

But not in a module, which is what you need to export the symbol for.
Frederic Barrat Nov. 7, 2019, 5:59 p.m. UTC | #4
Le 25/10/2019 à 06:46, Alastair D'Silva a écrit :
> From: Alastair D'Silva <alastair@d-silva.org>
> 
> This patch adds platform support to map & release LPC memory.
> 
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
>   arch/powerpc/include/asm/pnv-ocxl.h   |  2 ++
>   arch/powerpc/platforms/powernv/ocxl.c | 41 +++++++++++++++++++++++++++
>   include/linux/memory_hotplug.h        |  5 ++++
>   mm/memory_hotplug.c                   |  3 +-
>   4 files changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
> index 7de82647e761..f8f8ffb48aa8 100644
> --- a/arch/powerpc/include/asm/pnv-ocxl.h
> +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> @@ -32,5 +32,7 @@ extern int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>   
>   extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
>   extern void pnv_ocxl_free_xive_irq(u32 irq);
> +extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size);
> +extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
>   
>   #endif /* _ASM_PNV_OCXL_H */
> diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
> index 8c65aacda9c8..c6d4234e0aba 100644
> --- a/arch/powerpc/platforms/powernv/ocxl.c
> +++ b/arch/powerpc/platforms/powernv/ocxl.c
> @@ -475,6 +475,47 @@ void pnv_ocxl_spa_release(void *platform_data)
>   }
>   EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
>   
> +u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	u64 base_addr = 0;
> +	int rc;
> +
> +	rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size, &base_addr);
> +	if (rc) {
> +		dev_warn(&pdev->dev,
> +			 "OPAL could not allocate LPC memory, rc=%d\n", rc);
> +		return 0;
> +	}
> +
> +	base_addr = be64_to_cpu(base_addr);
> +
> +	rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
> +					      size >> PAGE_SHIFT);
> +	if (rc)
> +		return 0;
> +
> +	return base_addr;
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
> +
> +void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	int rc;
> +
> +	rc = opal_npu_mem_release(phb->opal_id, bdfn);
> +	if (rc)
> +		dev_warn(&pdev->dev,
> +			 "OPAL reported rc=%d when releasing LPC memory\n", rc);
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
> +
> +
>   int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>   {
>   	struct spa_data *data = (struct spa_data *) platform_data;
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index f46ea71b4ffd..3f5f1a642abe 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -339,6 +339,11 @@ static inline int remove_memory(int nid, u64 start, u64 size)
>   static inline void __remove_memory(int nid, u64 start, u64 size) {}
>   #endif /* CONFIG_MEMORY_HOTREMOVE */
>   
> +#if CONFIG_MEMORY_HOTPLUG_SPARSE
> +int check_hotplug_memory_addressable(unsigned long pfn,
> +		unsigned long nr_pages);
> +#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
> +
>   extern void __ref free_area_init_core_hotplug(int nid);
>   extern int __add_memory(int nid, u64 start, u64 size);
>   extern int add_memory(int nid, u64 start, u64 size);
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 2cecf07b396f..b39827dbd071 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -278,7 +278,7 @@ static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,
>   	return 0;
>   }
>   
> -static int check_hotplug_memory_addressable(unsigned long pfn,
> +int check_hotplug_memory_addressable(unsigned long pfn,
>   					    unsigned long nr_pages)
>   {
>   	const u64 max_addr = PFN_PHYS(pfn + nr_pages) - 1;
> @@ -294,6 +294,7 @@ static int check_hotplug_memory_addressable(unsigned long pfn,
>   
>   	return 0;
>   }
> +EXPORT_SYMBOL_GPL(check_hotplug_memory_addressable);


Making check_hotplug_memory_addressable() visible in the kernel could be 
a separate patch, to make sure it gets the proper attention instead of 
being buried in a powerpc patch.
Also, already mentioned, but it shouldn't be exported.


>   
>   /*
>    * Reasonably generic function for adding memory.  It is
>
Aneesh Kumar K.V Nov. 11, 2019, 9:34 a.m. UTC | #5
"Alastair D'Silva" <alastair@au1.ibm.com> writes:

> From: Alastair D'Silva <alastair@d-silva.org>
>
> This patch adds platform support to map & release LPC memory.
>
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
>  arch/powerpc/include/asm/pnv-ocxl.h   |  2 ++
>  arch/powerpc/platforms/powernv/ocxl.c | 41 +++++++++++++++++++++++++++
>  include/linux/memory_hotplug.h        |  5 ++++
>  mm/memory_hotplug.c                   |  3 +-
>  4 files changed, 50 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
> index 7de82647e761..f8f8ffb48aa8 100644
> --- a/arch/powerpc/include/asm/pnv-ocxl.h
> +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> @@ -32,5 +32,7 @@ extern int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>  
>  extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
>  extern void pnv_ocxl_free_xive_irq(u32 irq);
> +extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size);
> +extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
>  
>  #endif /* _ASM_PNV_OCXL_H */
> diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
> index 8c65aacda9c8..c6d4234e0aba 100644
> --- a/arch/powerpc/platforms/powernv/ocxl.c
> +++ b/arch/powerpc/platforms/powernv/ocxl.c
> @@ -475,6 +475,47 @@ void pnv_ocxl_spa_release(void *platform_data)
>  }
>  EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
>  
> +u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	u64 base_addr = 0;
> +	int rc;
> +
> +	rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size, &base_addr);
> +	if (rc) {
> +		dev_warn(&pdev->dev,
> +			 "OPAL could not allocate LPC memory, rc=%d\n", rc);
> +		return 0;
> +	}
> +
> +	base_addr = be64_to_cpu(base_addr);
> +
> +	rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
> +					      size >> PAGE_SHIFT);
> +	if (rc)
> +		return 0;
> +
> +	return base_addr;
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
> +
> +void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	int rc;
> +
> +	rc = opal_npu_mem_release(phb->opal_id, bdfn);
> +	if (rc)
> +		dev_warn(&pdev->dev,
> +			 "OPAL reported rc=%d when releasing LPC memory\n", rc);
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
> +
> +
>  int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>  {
>  	struct spa_data *data = (struct spa_data *) platform_data;
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index f46ea71b4ffd..3f5f1a642abe 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -339,6 +339,11 @@ static inline int remove_memory(int nid, u64 start, u64 size)
>  static inline void __remove_memory(int nid, u64 start, u64 size) {}
>  #endif /* CONFIG_MEMORY_HOTREMOVE */
>  
> +#if CONFIG_MEMORY_HOTPLUG_SPARSE
> +int check_hotplug_memory_addressable(unsigned long pfn,
> +		unsigned long nr_pages);
> +#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
> +
>  extern void __ref free_area_init_core_hotplug(int nid);
>  extern int __add_memory(int nid, u64 start, u64 size);
>  extern int add_memory(int nid, u64 start, u64 size);
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 2cecf07b396f..b39827dbd071 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -278,7 +278,7 @@ static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,
>  	return 0;
>  }
>  
> -static int check_hotplug_memory_addressable(unsigned long pfn,
> +int check_hotplug_memory_addressable(unsigned long pfn,
>  					    unsigned long nr_pages)
>  {
>  	const u64 max_addr = PFN_PHYS(pfn + nr_pages) - 1;
> @@ -294,6 +294,7 @@ static int check_hotplug_memory_addressable(unsigned long pfn,
>  
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(check_hotplug_memory_addressable);
>  
>  /*
>   * Reasonably generic function for adding memory.  It is
> -- 
> 2.21.0

If you can rearrange the patch to show the callers in this same patch
that would make it easy to follow.

-aneesh

Patch
diff mbox series

diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
index 7de82647e761..f8f8ffb48aa8 100644
--- a/arch/powerpc/include/asm/pnv-ocxl.h
+++ b/arch/powerpc/include/asm/pnv-ocxl.h
@@ -32,5 +32,7 @@  extern int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
 
 extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
 extern void pnv_ocxl_free_xive_irq(u32 irq);
+extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size);
+extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
 
 #endif /* _ASM_PNV_OCXL_H */
diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
index 8c65aacda9c8..c6d4234e0aba 100644
--- a/arch/powerpc/platforms/powernv/ocxl.c
+++ b/arch/powerpc/platforms/powernv/ocxl.c
@@ -475,6 +475,47 @@  void pnv_ocxl_spa_release(void *platform_data)
 }
 EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
 
+u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
+	u64 base_addr = 0;
+	int rc;
+
+	rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size, &base_addr);
+	if (rc) {
+		dev_warn(&pdev->dev,
+			 "OPAL could not allocate LPC memory, rc=%d\n", rc);
+		return 0;
+	}
+
+	base_addr = be64_to_cpu(base_addr);
+
+	rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
+					      size >> PAGE_SHIFT);
+	if (rc)
+		return 0;
+
+	return base_addr;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
+
+void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
+	int rc;
+
+	rc = opal_npu_mem_release(phb->opal_id, bdfn);
+	if (rc)
+		dev_warn(&pdev->dev,
+			 "OPAL reported rc=%d when releasing LPC memory\n", rc);
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
+
+
 int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
 {
 	struct spa_data *data = (struct spa_data *) platform_data;
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index f46ea71b4ffd..3f5f1a642abe 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -339,6 +339,11 @@  static inline int remove_memory(int nid, u64 start, u64 size)
 static inline void __remove_memory(int nid, u64 start, u64 size) {}
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 
+#if CONFIG_MEMORY_HOTPLUG_SPARSE
+int check_hotplug_memory_addressable(unsigned long pfn,
+		unsigned long nr_pages);
+#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
+
 extern void __ref free_area_init_core_hotplug(int nid);
 extern int __add_memory(int nid, u64 start, u64 size);
 extern int add_memory(int nid, u64 start, u64 size);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 2cecf07b396f..b39827dbd071 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -278,7 +278,7 @@  static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,
 	return 0;
 }
 
-static int check_hotplug_memory_addressable(unsigned long pfn,
+int check_hotplug_memory_addressable(unsigned long pfn,
 					    unsigned long nr_pages)
 {
 	const u64 max_addr = PFN_PHYS(pfn + nr_pages) - 1;
@@ -294,6 +294,7 @@  static int check_hotplug_memory_addressable(unsigned long pfn,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(check_hotplug_memory_addressable);
 
 /*
  * Reasonably generic function for adding memory.  It is