[v3,1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
diff mbox series

Message ID 20191025175908.14260-2-manivannan.sadhasivam@linaro.org
State New
Headers show
Series
  • Add IMX296 CMOS image sensor support
Related show

Commit Message

Manivannan Sadhasivam Oct. 25, 2019, 5:59 p.m. UTC
Add YAML devicetree binding for IMX296 CMOS image sensor.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml

Comments

Sakari Ailus Oct. 28, 2019, 12:21 p.m. UTC | #1
Hi Manivannan,

Thanks for the update.

On Fri, Oct 25, 2019 at 11:29:07PM +0530, Manivannan Sadhasivam wrote:
> Add YAML devicetree binding for IMX296 CMOS image sensor.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> new file mode 100644
> index 000000000000..4e204fd7cf90
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +description: |-
> +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> +  sensor with square pixel array and 1.58 M effective pixels. This chip
> +  features a global shutter with variable charge-integration time. It is
> +  programmable through I2C and 4-wire interfaces. The sensor output is
> +  available via CSI-2 serial data output (1 Lane).
> +
> +properties:
> +  compatible:
> +    const: sony,imx296
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:
> +      Input clock for the sensor.
> +    items:
> +      - const: mclk
> +
> +  clock-frequency:
> +    description:
> +      Frequency of the mclk clock in Hertz.
> +    default: 37125000

I think you could omit the default.

> +
> +  vddo-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +    maxItems: 1
> +
> +  vdda-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +    maxItems: 1
> +
> +  vddd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +    maxItems: 1
> +
> +  # See ../video-interfaces.txt for details
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - clock-frequency
> +  - vddo-supply
> +  - vdda-supply
> +  - vddd-supply

I think the port and endpoint nodes should documented here as well.

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    imx296: camera-sensor@1a {
> +        compatible = "sony,imx296";
> +        reg = <0x1a>;
> +        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&camera_rear_default>;
> +        clocks = <&gcc 90>;
> +        clock-names = "mclk";
> +        clock-frequency = <37125000>;
> +        vddo-supply = <&camera_vddo_1v8>;
> +        vdda-supply = <&camera_vdda_3v3>;
> +        vddd-supply = <&camera_vddd_1v2>;
> +
> +        port {
> +            imx296_ep: endpoint {
> +                remote-endpoint = <&csiphy0_ep>;
> +            };
> +        };
> +    };
> +
> +...
Rob Herring Oct. 29, 2019, 10:09 p.m. UTC | #2
On Fri, Oct 25, 2019 at 11:29:07PM +0530, Manivannan Sadhasivam wrote:
> Add YAML devicetree binding for IMX296 CMOS image sensor.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> new file mode 100644
> index 000000000000..4e204fd7cf90
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +description: |-
> +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> +  sensor with square pixel array and 1.58 M effective pixels. This chip
> +  features a global shutter with variable charge-integration time. It is
> +  programmable through I2C and 4-wire interfaces. The sensor output is
> +  available via CSI-2 serial data output (1 Lane).
> +
> +properties:
> +  compatible:
> +    const: sony,imx296
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:
> +      Input clock for the sensor.
> +    items:
> +      - const: mclk
> +
> +  clock-frequency:
> +    description:
> +      Frequency of the mclk clock in Hertz.
> +    default: 37125000
> +
> +  vddo-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +    maxItems: 1

You don't need 'maxItems' on *-supply. It's not an array.

> +
> +  vdda-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +    maxItems: 1
> +
> +  vddd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +    maxItems: 1
> +
> +  # See ../video-interfaces.txt for details
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - clock-frequency
> +  - vddo-supply
> +  - vdda-supply
> +  - vddd-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    imx296: camera-sensor@1a {
> +        compatible = "sony,imx296";
> +        reg = <0x1a>;
> +        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&camera_rear_default>;
> +        clocks = <&gcc 90>;
> +        clock-names = "mclk";
> +        clock-frequency = <37125000>;
> +        vddo-supply = <&camera_vddo_1v8>;
> +        vdda-supply = <&camera_vdda_3v3>;
> +        vddd-supply = <&camera_vddd_1v2>;
> +
> +        port {
> +            imx296_ep: endpoint {
> +                remote-endpoint = <&csiphy0_ep>;
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.17.1
>
Rob Herring Oct. 29, 2019, 10:12 p.m. UTC | #3
On Mon, Oct 28, 2019 at 02:21:15PM +0200, Sakari Ailus wrote:
> Hi Manivannan,
> 
> Thanks for the update.
> 
> On Fri, Oct 25, 2019 at 11:29:07PM +0530, Manivannan Sadhasivam wrote:
> > Add YAML devicetree binding for IMX296 CMOS image sensor.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
> >  1 file changed, 98 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > new file mode 100644
> > index 000000000000..4e204fd7cf90
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > @@ -0,0 +1,98 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> > +
> > +maintainers:
> > +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > +
> > +description: |-
> > +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> > +  sensor with square pixel array and 1.58 M effective pixels. This chip
> > +  features a global shutter with variable charge-integration time. It is
> > +  programmable through I2C and 4-wire interfaces. The sensor output is
> > +  available via CSI-2 serial data output (1 Lane).
> > +
> > +properties:
> > +  compatible:
> > +    const: sony,imx296
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    description:
> > +      Input clock for the sensor.
> > +    items:
> > +      - const: mclk
> > +
> > +  clock-frequency:
> > +    description:
> > +      Frequency of the mclk clock in Hertz.
> > +    default: 37125000
> 
> I think you could omit the default.

Yes, there's no default if it is required.
 
> > +
> > +  vddo-supply:
> > +    description:
> > +      Definition of the regulator used as interface power supply.
> > +    maxItems: 1
> > +
> > +  vdda-supply:
> > +    description:
> > +      Definition of the regulator used as analog power supply.
> > +    maxItems: 1
> > +
> > +  vddd-supply:
> > +    description:
> > +      Definition of the regulator used as digital power supply.
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    description:
> > +      The phandle and specifier for the GPIO that controls sensor reset.
> > +    maxItems: 1
> > +
> > +  # See ../video-interfaces.txt for details

details on what?

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - clock-frequency
> > +  - vddo-supply
> > +  - vdda-supply
> > +  - vddd-supply
> 
> I think the port and endpoint nodes should documented here as well.

port yes, but endpoint no. Unless you have endpoint properties other 
than remote-endpoint or reg.

> 
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    imx296: camera-sensor@1a {
> > +        compatible = "sony,imx296";
> > +        reg = <0x1a>;
> > +        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> > +        pinctrl-names = "default";
> > +        pinctrl-0 = <&camera_rear_default>;
> > +        clocks = <&gcc 90>;
> > +        clock-names = "mclk";
> > +        clock-frequency = <37125000>;
> > +        vddo-supply = <&camera_vddo_1v8>;
> > +        vdda-supply = <&camera_vdda_3v3>;
> > +        vddd-supply = <&camera_vddd_1v2>;
> > +
> > +        port {
> > +            imx296_ep: endpoint {
> > +                remote-endpoint = <&csiphy0_ep>;
> > +            };
> > +        };
> > +    };
> > +
> > +...
> 
> -- 
> Regards,
> 
> Sakari Ailus
Manivannan Sadhasivam Oct. 30, 2019, 6:45 a.m. UTC | #4
Hi Rob, Sakari,

On Tue, Oct 29, 2019 at 05:12:13PM -0500, Rob Herring wrote:
> On Mon, Oct 28, 2019 at 02:21:15PM +0200, Sakari Ailus wrote:
> > Hi Manivannan,
> > 
> > Thanks for the update.
> > 
> > On Fri, Oct 25, 2019 at 11:29:07PM +0530, Manivannan Sadhasivam wrote:
> > > Add YAML devicetree binding for IMX296 CMOS image sensor.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
> > >  1 file changed, 98 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > > new file mode 100644
> > > index 000000000000..4e204fd7cf90
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > > @@ -0,0 +1,98 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> > > +
> > > +maintainers:
> > > +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > +
> > > +description: |-
> > > +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> > > +  sensor with square pixel array and 1.58 M effective pixels. This chip
> > > +  features a global shutter with variable charge-integration time. It is
> > > +  programmable through I2C and 4-wire interfaces. The sensor output is
> > > +  available via CSI-2 serial data output (1 Lane).
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: sony,imx296
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +
> > > +  clock-names:
> > > +    description:
> > > +      Input clock for the sensor.
> > > +    items:
> > > +      - const: mclk
> > > +
> > > +  clock-frequency:
> > > +    description:
> > > +      Frequency of the mclk clock in Hertz.
> > > +    default: 37125000
> > 
> > I think you could omit the default.
> 
> Yes, there's no default if it is required.
>

Okay.

> > > +
> > > +  vddo-supply:
> > > +    description:
> > > +      Definition of the regulator used as interface power supply.
> > > +    maxItems: 1
> > > +
> > > +  vdda-supply:
> > > +    description:
> > > +      Definition of the regulator used as analog power supply.
> > > +    maxItems: 1
> > > +
> > > +  vddd-supply:
> > > +    description:
> > > +      Definition of the regulator used as digital power supply.
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > > +    description:
> > > +      The phandle and specifier for the GPIO that controls sensor reset.
> > > +    maxItems: 1
> > > +
> > > +  # See ../video-interfaces.txt for details
> 
> details on what?
>

Standard properties like endpoint, reg, etc...  I can remove it if not
required.

> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - clock-frequency
> > > +  - vddo-supply
> > > +  - vdda-supply
> > > +  - vddd-supply
> > 
> > I think the port and endpoint nodes should documented here as well.
> 
> port yes, but endpoint no. Unless you have endpoint properties other 
> than remote-endpoint or reg.
> 


Okay. Will document port.

Thanks,
Mani

> > 
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +
> > > +    imx296: camera-sensor@1a {
> > > +        compatible = "sony,imx296";
> > > +        reg = <0x1a>;
> > > +        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> > > +        pinctrl-names = "default";
> > > +        pinctrl-0 = <&camera_rear_default>;
> > > +        clocks = <&gcc 90>;
> > > +        clock-names = "mclk";
> > > +        clock-frequency = <37125000>;
> > > +        vddo-supply = <&camera_vddo_1v8>;
> > > +        vdda-supply = <&camera_vdda_3v3>;
> > > +        vddd-supply = <&camera_vddd_1v2>;
> > > +
> > > +        port {
> > > +            imx296_ep: endpoint {
> > > +                remote-endpoint = <&csiphy0_ep>;
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > +...
> > 
> > -- 
> > Regards,
> > 
> > Sakari Ailus

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
new file mode 100644
index 000000000000..4e204fd7cf90
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
@@ -0,0 +1,98 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |-
+  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+  sensor with square pixel array and 1.58 M effective pixels. This chip
+  features a global shutter with variable charge-integration time. It is
+  programmable through I2C and 4-wire interfaces. The sensor output is
+  available via CSI-2 serial data output (1 Lane).
+
+properties:
+  compatible:
+    const: sony,imx296
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: mclk
+
+  clock-frequency:
+    description:
+      Frequency of the mclk clock in Hertz.
+    default: 37125000
+
+  vddo-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+    maxItems: 1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+    maxItems: 1
+
+  vddd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+    maxItems: 1
+
+  # See ../video-interfaces.txt for details
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - vddo-supply
+  - vdda-supply
+  - vddd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    imx296: camera-sensor@1a {
+        compatible = "sony,imx296";
+        reg = <0x1a>;
+        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_rear_default>;
+        clocks = <&gcc 90>;
+        clock-names = "mclk";
+        clock-frequency = <37125000>;
+        vddo-supply = <&camera_vddo_1v8>;
+        vdda-supply = <&camera_vdda_3v3>;
+        vddd-supply = <&camera_vddd_1v2>;
+
+        port {
+            imx296_ep: endpoint {
+                remote-endpoint = <&csiphy0_ep>;
+            };
+        };
+    };
+
+...